sr-users May 2007

sr-users@lists.kamailio.org

164 participants
295 discussions

by zm23

Hi all, I am having some issues with editing remote party header. I understand that changes are saved as a diff and are sent when packet goes on wire. In my current config rpid is edited when invite is received and it seems to work fine. There is one scenario where I need to edit rpid or remove rpid altogether before relaying it. "remove_hf" did not remove the header after it was edited earlier. Is there a way to do this? Thanks in advance for your help. -- Zahid

16 years, 9 months

[Users] error: xmlrpc.h: No such file or directory

by kjcsb

I am trying to make openser-1.2.0-notls and get the following error: In file included from mi_xmlrpc.c:38: mi_xmlrpc.h:35:20: error: xmlrpc.h: No such file or directory In file included from mi_xmlrpc.c:38: mi_xmlrpc.h:37: error: syntax error before âenvâ mi_xmlrpc.h:37: warning: type defaults to âintâ in declaration of âenvâ mi_xmlrpc.h:37: warning: data definition has no type or storage class mi_xmlrpc.h:38: error: syntax error before â*â token mi_xmlrpc.h:38: warning: type defaults to âintâ in declaration of âxr_responseâ mi_xmlrpc.h:38: warning: data definition has no type or storage class In file included from mi_xmlrpc.c:39: xr_writer.h:37: error: syntax error before â*â token xr_writer.h:38: error: syntax error before â*â token In file included from mi_xmlrpc.c:40: xr_parser.h:36: error: syntax error before â*â token In file included from mi_xmlrpc.c:41: xr_server.h:35: error: syntax error before â*â token xr_server.h:35: error: syntax error before â*â token xr_server.h:36: warning: type defaults to âintâ in declaration of âdefault_methodâ xr_server.h:36: warning: data definition has no type or storage class xr_server.h:38: error: syntax error before â*â token mi_xmlrpc.c:44:26: error: xmlrpc_abyss.h: No such file or directory mi_xmlrpc.c:50: error: syntax error before âenvâ mi_xmlrpc.c:50: warning: type defaults to âintâ in declaration of âenvâ mi_xmlrpc.c:50: warning: data definition has no type or storage class mi_xmlrpc.c:51: error: syntax error before â*â token mi_xmlrpc.c:51: warning: type defaults to âintâ in declaration of âxr_responseâ mi_xmlrpc.c:51: warning: data definition has no type or storage class mi_xmlrpc.c: In function âmod_child_initâ: mi_xmlrpc.c:162: warning: implicit declaration of function âxmlrpc_server_abyss_init_registryâ mi_xmlrpc.c:172: error: âxmlrpc_server_abyss_rpc2_handlerâ undeclared (first use in this function) mi_xmlrpc.c:172: error: (Each undeclared identifier is reported only once mi_xmlrpc.c:172: error: for each function it appears in.) mi_xmlrpc.c:178: error: âxmlrpc_server_abyss_default_handlerâ undeclared (first use in this function) mi_xmlrpc.c:193: warning: implicit declaration of function âxmlrpc_env_initâ mi_xmlrpc.c:196: warning: implicit declaration of function âxmlrpc_build_valueâ mi_xmlrpc.c:196: warning: assignment makes pointer from integer without a cast mi_xmlrpc.c:197: error: request for member âfault_occurredâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:219: warning: implicit declaration of function âxmlrpc_env_cleanâ mi_xmlrpc.c:220: warning: implicit declaration of function âxmlrpc_DECREFâ make[1]: *** [mi_xmlrpc.o] Error 1 make[1]: Leaving directory `/usr/src/openser-1.2.0-notls/modules/mi_xmlrpc' make: *** [modules] Error 2 rpm -q xmlrpc-c-devel xmlrpc-c-devel-1.04-1.fc4 find -name xmlrpc.h ./usr/include/xmlrpc-c/xmlrpc.h Any suggestions would be appreciated. Regards Cameron

16 years, 10 months

[Serusers] Call waiting and accounting

by inge

Hi all, I've got a problem with call waiting function. This one allow us to hang out a call when we are already in communication. But when I press "R" on my phone to take the second call, there is one INVITE and one ACK generated by the proxy and being accounted in MySQL. It's the same when I switch between both callers. So I can have for the same callid 2 3 4...X INVITE ACK and one BYE. So in SERWeb for example, I can see for one call 3 lines of accounting. Thanks for you support. Adrien .L

16 years, 10 months

[Users] Interaction Presence Agent - Presence User Agent

by Schumann Sebastian

Dear all, I have a question for understanding: I have implemented one OpenSER as Registrar and one OpenSER as Presence Agent plus XCAP Server 1.0.0. This is all working so far with newest SVN Release (Big Thanks to Ovidiu and Anca for the hint) of OpenSER. Now I want to deploy a Web-Front-End for user interaction with the Presence Core, because not all clients used are SIMPLE capable. User of non-capable devices should be able to just login and change their presence state. They do not necessarily have to be registered at the registrar, why PUA+ pua_usrloc on registrar side is no choice. I was thinking about another OpenSER deployed as PUA plus the pua_mi module for a solution. It gets commands from Web-Frontend via PHP, forwarded to the FIFO with pua_mi module. The problem I have now is that the messages are sent just once. Means a user changes his presence state, PUA sends a PUBLISH to PA but after the expiry the user appears to be offline. Is there any possiblitiy to let the PUA send messages constantly, when the user selects online - means all the time until offline is selected? I was thinking about many possiblities (cronjob or shellscript running all the time during online time and sending data to FIFO) but they are more or less just work-arounds. Best regards Sebastian Sebastian Schumann Diploma Student Architecture and Design Department Slovak Telekom, a. s. T-Com, Operations Unit Production and Service Division Innovations and Enterprise Solution Subunit Address: Namestie Slobody 6, 817 62 Bratislava, Slovakia Office: Room 232, Jarabinkova 1, 821 09 Bratislava, Slovakia +421 910 643010 (mobile) sebastian.schumann(a)t-com.sk http://www.t-com.sk

16 years, 10 months

[Serusers] problem with MESSAGE and un-REGISTER

by KUMAR

hi all, I've started using SER 2.0 rc1 and am having a bit of problems with UA behind NAT. I'm using Windows Messenger 5.1 as the UA. Everything works fine when both UAs are not behind NAT. But when I place one of the UAs behind NAT, then, here's what happens, in this order UA Behind Nat ----------MESSAGE------>UA outside NAT..............ok UA outside NAT-----------MESSAGE------->UA behind NAT.............OK UA behind NAT------------MESSAGE------->UA outside NAT.............message is stored by msilo module and sent after some time. The log shows: MSILO: the downstream UA doesn't support MESSAGEs Notice that this only happens once a message from outside of NAT is sent to UA inside NAT. I am using RTP Proxy for NAT solution which is on the same system as SER. Moreover, I also cannot signout using the Windows Messenger. However, when I tested using XLite, None of the above mentioned problems arose. Can anyone please suggest me as to where the problem might be. The ser.cfg that I'm using is the one from the iptel site, the one with NAT & RTPproxy. I am also attaching the ser.cfg. Thank you in advance. Kumar

16 years, 10 months

Re: [Serusers] [Serweb-users] OpenSER and SERWeb problems logging on (that old chestnut)

by flavio

May 29 11:49:19 *serweb* [error] file: /opt/*serweb*-0.9.6/html/data_layer.php:465: DB Error: connect failed - [nativecode=Access denied for user 'ser'@'localhost' (using password: YES)] ** mysql://ser:heslo@localhost/ser<http://www.voipuser.org/ship_to.php?url=mysql://ser:heslo@localhost/ser> Do you access mysql with mysql -u ser -p $>password: heslo ? If yes, try to start mysqld with --old-password option following tips at url: http://dev.mysql.com/doc/refman/5.0/en/old-client.html Bye, F. -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

16 years, 10 months

[Serusers] avp_radius - ser2.1 - Access Request Contents

by tzieleniewski

hi! When I invoke the radius_load_attrs() the message send to radius has the following shape: Thu Mar 8 10:50:46 2007 Packet-Type = Access-Request User-Name = "sip:hellboy@voip.rd.touk.pl" SER-Service-Type = Get-User-Attrs NAS-Port = 0 NAS-IP-Address = 127.0.0.1 the message doesn't contain any authentication data like password. so do I understand right that radius in such case should be configured in such a way to accept any message of the SER-Service-Type = Get-User-Attrs? Are still the avp loaded from radius prefixed or they are just put into the particular track and class? Could You please give me one example of the radius one avp record and the shape in which it will appear in ser after loading. Thank you in advance Best Tomasz

16 years, 10 months

[Users] Mediaproxy Selection for Inbound DID calls

by Mike O'Connor

Hi All I would like to be able to have a difference Mediaproxy group selected per user account on inbound DID calls. Our termination provider sends the calls to our openSER with a URI of something <number>@<IP_address>. '08723451234(a)202.xxx.xxx.xxx', we use the alias_db_lookup("dbaliases") function to resolve the phone number to a user account on the DID calls. I would think that some type of rewrite of the '@202.xxx.xxx.xxx' would need to be done but I'm sure this would cause other issues. Any ideas would be great :) Thanks Mike

16 years, 10 months

[Serusers] Preserve DSCP marking

by Ravindranath Gummadidala

Does SER have support for preserving the DSCP markings of (incoming) SIP messages it processes before sending them out? Or is this something one would need to change the SER source code for? I searched in the archives but could not find anything relevant. Regards, -Ravi.

16 years, 10 months

[Users] changes in database setup scripts

by Henning Westerholt

Hello all, i've commited new database setup scripts for mysql and postgresql. Now are the SQL tables generated from a common XML definition, to avoid inconsistencies between the different databases. With the new system is not more necessary to update three different shell scripts for one database table change, hopefully this will lead to fewer bugs. The dbtext integration is still missing, i'll work on this and on further extension of the system in two weeks after the programming course in paris. I've tested the new system with mysql 5.0 and postgresql 8.2, but there are probably still some bugs present. So if you get an database setup script related error from trunk, don't hesitate to complain here or on the devel list. :-) You'll find further informations about this system in the wiki: http://www.openser.org/dokuwiki/doku.php/development:db-schema Best regards, Henning

16 years, 10 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2007