Hi all,
We are working VoIP Project. We are using OpenSER 1.0.1. Unfortunately it
doesn't support xcap and presence modules. Only the version 1.2.0 of the
OpenSER.
Is it ready openser 1.2.0? Or still delay?
Thanks, regards,
Danilo
Hi all
I am testing nat pinging. I have a natted UA and 2 opensers with diffrent ips. I decided to ping same nat from 2 opensers. I am going to have ability to increase ping interval from 15 seconds to 30 seconds. But I don't have any idea that cross pinging works or not. Is there any one at there whom tested before or any suggestions??
Thanks
Fatih Cerit
The command "serctl ul show" displays an
'Expires' entry.
I'm wondering:
* what is the default expiration value?
* where/how does this get set, and is it configurable?
Many thanks!
Hi everybody,
I am trying to achieve TLS setup between the UAs and OpenSER. I am using PAP2 and SPA series for testing.
Now the PAP2 does not support TLS transport, is it possible to use TLS setup between OpenSER and PAP2 using DNS-SRV? I tried using DNS-SRV but was not successful.
The SPA supports TLS transport. I have generated the priviate key and required certs in the OpenSER. For SPA to work, how do we incorporate the certificate inside the SPA?
Or should I get a certificate generated from Linksys and then add it to my CA list in OpenSER?
I am not very familiar with the TLS concept but still learning.
Thanks in advance.
w/regards,
Jayesh
__________________________________________________________
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/
It's more than possible there's a module or piece of documentation that
I've been unable to uncover in my attempts to solve this issue.
Basically, I'm looking for a way to do prefix or pattern based routing
using a datasource (such as dbtext or a real database). I don't want to
have to hack an openser.cnf file for each server I setup. That would just
be silly.
I've looked at PDT, but 1) it does source domain matching, which I could
really care less about, and 2) it's misbehaving or misdocumented, as it
won't allow for more than one prefix to be defined for a single source
domain. I'd really love to be able to do pattern matches and route that
way. But at this point, anything is better than hacking the config file.
Any suggestions?
--Chris
Hello,
There is a new MediaProxy release available.
To upgrade go to http://mediaproxy.ag-projects.com or download the
software directly from:
http://mediaproxy.ag-projects.com/mediaproxy-1.8.2.tar.gz
Changes from version 1.8.1 to 1.8.2
-----------------------------------
- Added support to setup sessions by either caller or called as the
initial
INVITE may not contain a SDP body (Jeff Williams
<jeffw(a)globaldial.com>)
- Added support to update the RTP stream sign-in addresses after re-
INVITES
(Jeff Williams <jeffw(a)globaldial.com>)
Changes from version 1.8.0 to 1.8.1
-----------------------------------
- Added User-Name attribute to the radius accounting Update request
(freeradius needs it to be able to proxy the request)
This release includes new functionality. Your feedback is
appreciated, if you wish to provide it please reply to the mailing
lists.
Kind regards,
Adrian Georgescu
Dear All,
I am new in openser. I have just installed openser on Fedora core 4 and run
it.
*I need "php user gui" for user to make web-based registeration process. I
will able to bult it up but i dont know which mysql table i should you.
*My aim is to give service to registered user on my datebase. In order to
implement it, which open module should i install ?
any help wolud be appreciated
Thank a lot
with my best regard.
Alper Ozbilen
_________________________________________________________________
Want a degree but can't afford to quit? Top school degrees online - in as
fast as 1 year
http://forms.nextag.com/goto.jsp?url=/serv/main/buyer/education.jsp?doSearc…
Hi!!
I am going to set up the sems-ser configuration.
In the mini-sems-ser-howto there is a clue to have separate instance of ser
for sems. Will sems 0.10.0 work with the ser ottendorf release??
Bests
tomasz
(started a new thread from a devel discuttion)
Everybody is encouraged to update the page below:
http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x
If you do not know how to explain clear, but you know (feel) something
changed from 1.1.x to 1.2.0 in a module or other place, just introduce
in bold red a short phrase at the beginning or in module's section.
Someone will see later and elaborate it.
Cheers,
Daniel
On 02/27/07 13:01, Andreas Granig wrote:
> Thank god there is
> http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x
>
> Hopefully, all the small changes are documented there (hint: the one
> below isn't yet) ;o)
>
> Cheers,
> Andreas
>
> Bogdan-Andrei Iancu wrote:
>> Hi Juha,
>>
>> yes, there is an impact on the script, but very small. The only
>> change is:
>> modparam("registrar", "sip_natping_flag", x )
>> goes into
>> modparam("nathelper","sipping_bflag",x)
>>
>> regards,
>> bogdan
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
I just configured the presence modul and got some strange output in my
shell when my xlite phone trys to subscribe to a non existant user:
0(16615) ERROR: warning_builder: buffer size exceeded
0(16615) WARNING: warning skipped -- too big
0(16615) ERROR: warning_builder: buffer size exceeded
0(16615) WARNING: warning skipped -- too big
0(16615) ERROR: warning_builder: buffer size exceeded
0(16615) WARNING: warning skipped -- too big
0(16615) PRESENCE: get_subs_dialog:The query for subscribtion for
[user]= sebastian.bruening%40googlemail.comtalk.v104112f54d0,[domain]=
sip0.en.ewetel.de for [event]= presence.winfo returned no result
0(16615) PRESENCE:query_db_notify: Could not get subs_dialog from database
0(16615) PRESENCE:update_subscribtion:Could not send notify for
presence.winfo
0(16615) PRESENCE:get_xcap_tree:The query in table xcap for
[username]=sebastian.bruening%40googlemail.comtalk.v104112f54d0 ,
domain=sip0.en.ewetel.de returned no result
any ideas what this mean? I use latest version of openser (1.2.0).
regards
Helmut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFF5D+D4tZeNddg3dwRAiYcAKCt9FJYu/yM6+HW/+QOXlp0XOAPWACfYpFZ
0JbJo+z27a2M1zr8WlEG4G4=
=I9/o
-----END PGP SIGNATURE-----
