sr-users February 2007

sr-users@lists.kamailio.org

158 participants
285 discussions

by Mark Price

On 12/20/06, Klaus Darilion <klaus.mailinglists(a)pernau.at > wrote: > > Hi Mark! > > Postgres should work well - I use it since ser 0.8. Just make sure that > the hard disk does not get full, because this breaks the index inside > postgres and postgres is getting real slow (re-create the index if it > happens). > > Last time I tested openser_postgres.sh it worked fine. If you find a bug > please let us know. > > Please check to use the latest versions from CVS (for 1.1 use CVS > rel_1_1_0) The latest version from cvs doesn't work out of the box with openser build from the release tarball, because the release tarball doesn't included /usr/sbin/openser_gen_ha1 (although I could get past this by replacing it with the md5sum equivelant). However, the release tarball doesn't work because of this bug: https://sourceforge.net/tracker/?func=detail&atid=743020&aid=1518732&group_… So, 1. is the cvs version of rel_1_1_0 considered safe for production use? 2. if so and there are important fixes such as this in CVS, would openser.org consider releasing a point release containing such changes? Thanks, Mark Price

17 years

Re: Fw: [Users] TM : retransmission timers

by Rao Ramaratnamma

Hi Weiter, Yeah, I have been trying to limit myself to technical observations too, but the governance aspect is somewhat interesting too as a hint for future development, even though I guess even this is much more confusing than the technical ones. I have investigated, both projects have their firms with them that pursue their commercial interests which creates a risk of possibly departing from the public interest, like with redhat. From this angle they look quite similar. But if any worries me just a little bit more than openser. Appearance at commercial shows on the "open" side versus technical event on the "net" side if I take your BSD parallel, marketing "open" webpage accusing "net" version bad, hiding root commerical sponsors on the "open" webpage, this could be signs for a redhat-like doubleedged sword. Hopefully I am oversensing because I mean it is natural that everybody has SOME interest, but indisputably folks on both sides have done good work, but same indisputably more TRANSPARENCY would be helpful for both projects so that users can be less investigative. But I agree the technical comparison you suggest will be very useful if not most useful. This is what I am eventually upto. Anything folks have to tell in this topic is most welcome like the retransmission timers in subject or user loading. rr disconcerted by the fact that the more I know the more I am confused and determined to get over the learning curve quickly. also excuse the abuse I crossposted again but I think cross interrogation is a bit painful but the more effective :-) ----- Original Message ---- From: Weiter Leiter <bp4mls(a)googlemail.com> To: Kim Il <kim_il_s(a)yahoo.com> Cc: users(a)openser.org Sent: Thursday, November 9, 2006 1:42:29 PM Subject: Re: Fw: [Users] TM : retransmission timers Common user barely has time to meet his boss requirements, rather than playing around with different scenarios, platforms, environments. I only read one email where Daniel stated that OpenSER now performs a whole much better while loading users from database. SER guys put no figure out yet, neither bare numbers nor comparisons. I'm just really curious to see how both servers perform, that's all. Even though I must maintain my SER, I kinda like OpenSER's faster releases and developers' responsiveness (that I shamelessly exploit for the common code left there :-), which is pretty much nonexistent with iptel (at least this is the general belief here at OpenSER). But about this I'll probably have to fight on SER's mailing list. I still wish that one day I won't have to compare features; heck, NetSER and FreeSER are still available ;-). WL. PS. Maybe regretfully, I haven't seen any iptel booth at von this year, while OpenSER guys put up a nice show. My congrats. On 11/9/06, Kim Il <kim_il_s(a)yahoo.com> wrote: I can see what you are hinting at, but I guess that the users are the unbiased party that should do the judgment and not the parties who have something to gain. cheers Weiter Leiter <bp4mls(a)googlemail.com> wrote: This features comparisons are not to last for too long, some performance comparisons would also be nice. After all, there are plenty of UA-level stacks out there. At least now that both projects get to have stable releases after forking and some core functionality remained shared. I wonder what "unbiased" organization will take up the challenge. :-) On 11/8/06, Kim Il < kim_il_s(a)yahoo.com > wrote:Mike, this is a really good start and we should collect these things so as to help the community to take the right choice. I would also suggest that what ever ground breaking issues we list we stay at the functional level (I do not think anyone is helped by using a description containing "allowing carrier grade platforms" and similar marketing phrases). cheers {truncated because too large} Sponsored Link Talk more and pay less. Vonage can save you up to $300 a year on your phone bill. Sign up now. _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

17 years, 1 month

[Users] dialog module configuration question

by Andy Pyles

Hello, I have a question on how to configure the dialog module ( 1.2.x from cvs yesterday ). With my config, ( attached) I can make calls and have verified that the acc module is working correctly. My question is, when I enable the dialog module, I can see that it is incrementing call count correctly, but when a bye is received, the dialog:active_dialogs statistic is never decremented. In the debug level 9 logs, ( also attached) I see this error after the 200OK is sent to the bye: 1(969) DBUG:dialog:unref_dlg: unref dlg 0xa7ce5a98 with 1 (delete=0)-> 1 Is this a case of one of the timers being set too short? by the way using a variable call length from well under a second ( using sipp ) to 20 second call doesnt' seem to make a difference . Thanks, Andy

17 years, 1 month

[Users] OpenSER's doxygen documentation available online

by Daniel-Constantin Mierla

Hello, ... although mainly intended for developers, it might be useful for everybody ... Doxygen-generated documentation for development version is now available for browse online at: http://www.openser.org/doxygen-devel/ It is a very good tool to check where a variable or function was defined or referenced, look at internal structures without downloading sources locally. Credits to Norman Brandinger for the config files of doxygen. Those files are now included in source tree, in 'doc/doxygen', so if you want to generate a local copy of such documentation, use: # doxygen doc/doxygen/openser-doxygen The outup is in 'doc' directory. you can tune it from doxygen config files. Cheers, Daniel

17 years, 1 month

[Serusers] ser 0.10.99 - unixsock_server.c:274: error: ‘last_process’ undeclared (first use in this function)

by "tzieleniewski"

Hi After a long way of trying to compile ser 0.10.99 I am still left some errors: Please help me with those: ser@tomix:~/src/ser-0.10.99$ make group_include="standard standard-dep stable" include_modules="xcap" all > ser.makeall.log make[1]: *** Nie podano obiektów i nie znaleziono makefile. Stop. make[1]: *** Nie podano obiektów i nie znaleziono makefile. Stop. make[1]: *** Nie podano obiektów i nie znaleziono makefile. Stop. unixsock_server.c: In function ‘init_unixsock_children’: unixsock_server.c:274: error: ‘last_process’ undeclared (first use in this function) unixsock_server.c:274: error: (Each undeclared identifier is reported only once unixsock_server.c:274: error: for each function it appears in.) unixsock_server.c:256: warning: unused variable ‘sockfd’ unixsock_server.c:253: warning: unused variable ‘backup’ make[1]: *** [unixsock_server.o] Błąd 1 checks.c: In function ‘generate_avps’: checks.c:89: error: ‘A_SER_ATTRS’ undeclared (first use in this function) checks.c:89: error: (Each undeclared identifier is reported only once checks.c:89: error: for each function it appears in.) checks.c: In function ‘radius_does_uri_exist’: checks.c:146: error: ‘V_CALL_CHECK’ undeclared (first use in this function) make[1]: *** [checks.o] Błąd 1 Errors in the above files correspond to the following lines: unixsock_server.c:274: error: snprintf(pt[last_process].desc, MAX_PT_DESC, "unix domain socket server @ %s", unixsock_name); checks.c:89: error: ‘A_SER_ATTRS’ undeclared (first use in this function) while ((vp = rc_avpair_get(vp, attrs[A_SER_ATTRS].v, 0))) { Bests Tomasz

17 years, 1 month

[Users] Dialog module bug?

by T.R. Missner

Hello, We are seeing this line in our logs quite consistently. Using dialog module with openser 1.1.1 I looked at the code and cannot determine why this condition would be happening. Any ideas? BUG:dialog:update_dlg_timer: links are nul (not in timer)! Thanks TR

17 years, 1 month

[Serusers] Problems creating DB in SER Ottendorf

by Andrey Kuprianov

Hi, Im running Ubuntu with MySQL 5.0.24a. I've downloaded and compiled Ottendorf from CVS successfully. The problem came, when I tried to create db with sip_router/scripts/mysql/ser_mysql.sh create. It asked for root password (i dont have any so I pressed Enter right away), but then displayed mysql options (give below) for me instead of creating DB. I suppose some argument went missing. How can I fix it? I also remember there was a manual way to do it, but I couldnt find a proper link. Can anyone help me, plz? Output: mysql Ver 14.12 Distrib 5.0.24a, for pc-linux-gnu (i486) using readline 5.1 Copyright (C) 2002 MySQL AB This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to modify and redistribute it under the GPL license Usage: mysql [OPTIONS] [database] -?, --help Display this help and exit. -I, --help Synonym for -? --auto-rehash Enable automatic rehashing. One doesn't need to use 'rehash' to get table and field completion, but startup and reconnecting may take a longer time. Disable with --disable-auto-rehash. -A, --no-auto-rehash No automatic rehashing. One has to use 'rehash' to get table and field completion. This gives a quicker start of mysql and disables rehashing on reconnect. WARNING: options deprecated; use --disable-auto-rehash instead. -B, --batch Don't use history file. Disable interactive behavior. (Enables --silent) --character-sets-dir=name Directory where character sets are. --default-character-set=name Set the default character set. -C, --compress Use compression in server/client protocol. -#, --debug[=#] This is a non-debug version. Catch this and exit -D, --database=name Database to use. --delimiter=name Delimiter to be used. -e, --execute=name Execute command and quit. (Disables --force and history file) -E, --vertical Print the output of a query (rows) vertically. -f, --force Continue even if we get an sql error. -g, --no-named-commands Named commands are disabled. Use \* form only, or use named commands only in the beginning of a line ending with a semicolon (;) Since version 10.9 the client now starts with this option ENABLED by default! Disable with '-G'. Long format commands still work from the first line. WARNING: option deprecated; use --disable-named-commands instead. -G, --named-commands Enable named commands. Named commands mean this program's internal commands; see mysql> help . When enabled, the named commands can be used from any line of the query, otherwise only from the first line, before an enter. Disable with --disable-named-commands. This option is disabled by default. -i, --ignore-spaces Ignore space after function names. --local-infile Enable/disable LOAD DATA LOCAL INFILE. -b, --no-beep Turn off beep on error. -h, --host=name Connect to host. -H, --html Produce HTML output. -X, --xml Produce XML output --line-numbers Write line numbers for errors. -L, --skip-line-numbers Don't write line number for errors. WARNING: -L is deprecated, use long version of this option instead. --no-pager Disable pager and print to stdout. See interactive help (\h) also. WARNING: option deprecated; use --disable-pager instead. --no-tee Disable outfile. See interactive help (\h) also. WARNING: option deprecated; use --disable-tee instead -n, --unbuffered Flush buffer after each query. --column-names Write column names in results. -N, --skip-column-names Don't write column names in results. WARNING: -N is deprecated, use long version of this options instead. -O, --set-variable=name Change the value of a variable. Please note that this option is deprecated; you can set variables directly with --variable-name=value. --sigint-ignore Ignore SIGINT (CTRL-C) -o, --one-database Only update the default database. This is useful for skipping updates to other database in the update log. --pager[=name] Pager to use to display results. If you don't supply an option the default pager is taken from your ENV variable PAGER. Valid pagers are less, more, cat [> filename], etc. See interactive help (\h) also. This option does not work in batch mode. -p, --password[=name] Password to use when connecting to server. If password is not given it's asked from the tty. WARNING: This is insecure as the password is visible for anyone through /proc for a short time. -P, --port=# Port number to use for connection. --prompt=name Set the mysql prompt to this value. --protocol=name The protocol of connection (tcp,socket,pipe,memory). -q, --quick Don't cache result, print it row by row. This may slow down the server if the output is suspended. Doesn't use history file. -r, --raw Write fields without conversion. Used with --batch. --reconnect Reconnect if the connection is lost. Disable with --disable-reconnect. This option is enabled by default. -s, --silent Be more silent. Print results with a tab as separator, each row on new line. -S, --socket=name Socket file to use for connection. --ssl Enable SSL for connection (automatically enabled with other flags). Disable with --skip-ssl. --ssl-ca=name CA file in PEM format (check OpenSSL docs, implies --ssl). --ssl-capath=name CA directory (check OpenSSL docs, implies --ssl). --ssl-cert=name X509 cert in PEM format (implies --ssl). --ssl-cipher=name SSL cipher to use (implies --ssl). --ssl-key=name X509 key in PEM format (implies --ssl). --ssl-verify-server-cert Verify server's "Common Name" in its cert against hostname used when connecting. This option is disabled by default. -t, --table Output in table format. -T, --debug-info Print some debug info at exit. --tee=name Append everything into outfile. See interactive help (\h) also. Does not work in batch mode. -u, --user=name User for login if not current user. -U, --safe-updates Only allow UPDATE and DELETE that uses keys. -U, --i-am-a-dummy Synonym for option --safe-updates, -U. -v, --verbose Write more. (-v -v -v gives the table output format). -V, --version Output version information and exit. -w, --wait Wait and retry if connection is down. --connect_timeout=# Number of seconds before connection timeout. --max_allowed_packet=# Max packet length to send to, or receive from server --net_buffer_length=# Buffer for TCP/IP and socket communication --select_limit=# Automatic limit for SELECT when using --safe-updates --max_join_size=# Automatic limit for rows in a join when using --safe-updates --secure-auth Refuse client connecting to server if it uses old (pre-4.1.1) protocol --show-warnings Show warnings after every statement. Default options are read from the following files in the given order: /etc/mysql/my.cnf ~/.my.cnf /etc/mysql/my.cnf The following groups are read: mysql client The following options may be given as the first argument: --print-defaults Print the program argument list and exit --no-defaults Don't read default options from any options file --defaults-file=# Only read default options from the given file # --defaults-extra-file=# Read this file after the global files are read Variables (--variable-name=value) and boolean options {FALSE|TRUE} Value (after reading options) --------------------------------- ----------------------------- auto-rehash TRUE character-sets-dir (No default value) default-character-set latin1 compress FALSE database (No default value) delimiter ; vertical FALSE force FALSE named-commands FALSE local-infile FALSE no-beep FALSE host localhost html FALSE xml FALSE line-numbers TRUE unbuffered FALSE column-names TRUE sigint-ignore FALSE port 3306 prompt mysql> quick FALSE raw FALSE reconnect FALSE socket /var/run/mysqld/mysqld.sock ssl FALSE ssl-ca (No default value) ssl-capath (No default value) ssl-cert (No default value) ssl-cipher (No default value) ssl-key (No default value) ssl-verify-server-cert FALSE table FALSE debug-info FALSE user root safe-updates FALSE i-am-a-dummy FALSE connect_timeout 0 max_allowed_packet 16777216 net_buffer_length 16384 select_limit 1000 max_join_size 1000000 secure-auth FALSE show-warnings FALSE Andrey.

17 years, 1 month

[Serusers] PATH Module in SER (0.9.6 or 0.10.x)

by SER LIST

Is there a paths module for SER? I want to implement a Load balancer using Dispatcher module and I will need a path module for handling registrations. Thanks in advance _________________________________________________________________ http://local.live.com/default.aspx?v=2&cp=43.658648~-79.383962&style=r&lvl=…

17 years, 1 month

[Users] regarding SIPS/TLS

by Andrew T Gin

Hi I'm not sure whether this belongs in the developer one or not. When I proxy requests through openSER, and the contact address for the client uses a secure URI (SIPS) and the protocol stated is TLS, I get the following error: 7(6639) ERROR: uri2proxy: bad transport for sips uri: 3 7(6639) ERROR:tm:t_forward_nonack: failure to add branches This is in ut.h, line 113. If the URI is a secure one (SIPS), why must the protocol be TCP or NONE? openSER exits when the URI is secure (SIPS) AND the transport is TLS. Why is this?

17 years, 1 month

[Users] Some precisions about reply_route handling

by Jean-Franois SMIGIELSKI

Hello list, My openser (1.1.0) does not forward provisionnal replies. Currently, the "180 Ringing" I receive are absorbed, and that is bad. But I don't use any configuration directive to explicitely and statefully forward provisionnal answers. Please, which can I use? The reply_route block that is used is set with a call to t_on_reply . Thanks a lot. JF Smigielski.

17 years, 1 month

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2007