sr-users December 2007

sr-users@lists.kamailio.org

130 participants
234 discussions

[Serusers] SIP Express Bundle - let's get started

by Greger V. Teigre

Hi guys, thanks a bunch for lots of input and I really appreciate the willingness to contribute. Thus, I have created a "project page": http://www.iptel.org/sip_express_bundle_sip_service_in_15_minutes I thought we could gather the current perspective on that page and document our decisions as we go. It will hopefully be useful in our process, as well as documentation for us and others later. I have noted the following volunteers: Jai: testing and installation work ram: testing SIP: tesing Jiri: anyting? Mike: testing and documentation Maybe we should set up a small mailing list for coordination emails, but for now, let's use serusers (where I think all the comments came). (I copy the other lists on this post, so the other lists know that the discussion will move to serusers). Out of the comments, I read CentOS and vmware as the most wanted combination. I have documented the pros and cons on the project page, and suggest that we do some testing before we decide. I also tried out rpath (which I have no previous experience with). My observations are documented on the same page. Thus, I have started setting up a minimal CentOS virtual appliance found in vmware's appliance directory on an esx server. I will send details on accessing it to the volunteers once it is up and running (decompressing, unpacking, and building a non-split disk takes an awful lot of time :-( ). Ok, further comments, ideas, etc, please post to serusers or edit/add comments to the project page (requires an iptel.org account). I see the following steps with documentation as we go (steps also found on the project page): 1. Testing and specification of what we want to accomplish 2. Environment and OS setup to ensure that we easily can release new versions 3. Installation and configuration of the software. I assume this step also will involve development of some tools we need, as well as adaptation of existing stuff 4. Testing and user documentation 5. Packaging and deployment Let's get going! g-)

16 years, 4 months

[OpenSER-Users] invite resend bug?

by yoshiki

hi, I am usingo openser-1.2.0 When a client transmitted INVITE and transmitted INVITE once again because a reply of openser was slow, these two INVITE message was treated as another message. The peer transmitted 200OK for INVITE of the beginning, but a server transmits "404 not found" to next INVITE. Will even a message of the same call ID be handled in this way? yokkie -------------------------------------- New Design Yahoo! JAPAN 2008/01/01 http://pr.mail.yahoo.co.jp/newdesign/

16 years, 4 months

[OpenSER-Users] Preparation for 1.2.3 release

by Bogdan-Andrei Iancu

Hi, I would like to try to get 1.2.3 out before Christmas, so here is a starting plan: 1) do some backporting related to bug fixes (like in TM, with Route for local generated requests) 2) do some backporting related to compiling errors and warnings (solaris, 64 bits, BSD, etc) 3) backport the new default configuration script we have in 1.3.0 I can take care of all this, not a problem. Is anybody seeing any stopper for doing the release by Thursday 20? Regards, Bogdan

16 years, 4 months

[OpenSER-Users] OpenSER 1.3.0 release - updates

by Bogdan-Andrei Iancu

Hi, The sources are no available for download from the SF site also. See: https://sourceforge.net/project/showfiles.php?group_id=139143 In some case SF will be better to use (for this purpose) as they mirror the files in multiple locations. Also, I generated and uploaded on openser.org packages for debian unstable and testing. See: http://www.openser.org/pub/openser/latest/packages/debian-unstable/ During next week, packages for debian stable will be generated and uploaded on the project local apt repository. Also some other binary tarballs are promised (by other contributors) for different OS and archs. Regards, Bogdan

16 years, 4 months

[OpenSER-Users] FIFO / SEMS

by Bruno Machado

Hi all I am reading about FIFO and I am wandering in my thoughts, searching for a solution that tear down a session. I don't want to use Asterisk anymore for this purpose. Can I send a BYE message through FIFO? Should I use "t_uac_dlg"? I was reading about "t_uac_cancel" but it generates a CANCEL and, of course, it won't resolve the problem. I didn't install SEMS yet. So, I would like to know if someone uses this software (OpenSER + SEMS) within this purpose. This link: http://svn.berlios.de/wsvn/sems/trunk/doc/Readme.sw_prepaid_sip?op=file&rev… has this: "When the call duration exceeds the credit, the call is terminated by SEMS." So, I can realize it sends a BYE to OpenSER through FIFO and it will be forwarded to the voip devices. Am I right? I will try to use the 't_uac_dlg' now. Any comments are welcome. Cheers Bruno Machado Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento! http://br.mail.yahoo.com/

16 years, 4 months

Re: [OpenSER-Users] OpenXcap fails to start the HTTP on port

by Amit Vijayvargiya

Hi all , I have a problem in running openxcap server this is my syslog Starting Open XCAP 0.9.7 Dec 17 21:02:03 ankith openxcap[31833]: [-] Traceback (most recent call last): Dec 17 21:02:03 ankith openxcap[31833]: [-] File "/usr/bin/openxcap", line 56, in ? Dec 17 21:02:03 ankith openxcap[31833]: [-] from xcap.server import XCAPServer Dec 17 21:02:03 ankith openxcap[31833]: [-] File "/usr/lib/python2.3/site-packages/xcap/server.py", line 16, in ? Dec 17 21:02:03 ankith openxcap[31833]: [-] from twisted.web2 import channel, resource, http, responsecode, server Dec 17 21:02:03 ankith openxcap[31833]: [-] File "/usr/lib/python2.3/site-packages/twisted/web2/channel/__init__.py", line 7, in ? Dec 17 21:02:03 ankith openxcap[31833]: [-] from twisted.web2.channel.cgi import startCGI Dec 17 21:02:03 ankith openxcap[31833]: [-] File "/usr/lib/python2.3/site-packages/twisted/web2/channel/cgi.py", line 8, in ? Dec 17 21:02:03 ankith openxcap[31833]: [-] from twisted.web2 import http, http_headers, server, responsecode Dec 17 21:02:03 ankith openxcap[31833]: [-] File "/usr/lib/python2.3/site-packages/twisted/web2/http.py", line 27, in ? Dec 17 21:02:03 ankith openxcap[31833]: [-] from twisted.web2 import iweb Dec 17 21:02:03 ankith openxcap[31833]: [-] File "/usr/lib/python2.3/site-packages/twisted/web2/iweb.py", line 58, in ? Dec 17 21:02:03 ankith openxcap[31833]: [-] class IOldNevowResource (components.Interface): Dec 17 21:02:03 ankith openxcap[31833]: [-] AttributeError: 'module' object has no attribute 'Interface' I think problem in somewhere in zope interface ..............but I have install zope 3.3.0 version ......... please help me out ............ Regards Amit On Wed, 2007-10-17 at 13:11 +0200, Gregorio wrote: > Hi all. > > > > Finally (buff!!) I could configure openXcap, after executing ‘openxcap > start’ the log says: > > > > ‘ [-] Log opened. > > [-] Starting Open XCAP 0.9.4 > > [-] Supported Root URIs: http://192.168.1.206 > > [-] twisted.web2.channel.http.HTTPFactory starting on 8000’ > > > > And nothing else, no more logs displayed. OpenXcap process is running > in the machine: > > [root@XXXXX]# ps -ef|grep xcap > > root 926 1 0 18:02 ? > 00:00:00 /usr/bin/python /etc/rc.d/init.d/openxcap start > > > > But no one is listening in port 8000, neither before executing xcap > nor after. > > > > I haven´t found any error in any log so I don’t know what is going on. > > Anyone can help me? > > > > Thanks. > > Gregorio > > > > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

16 years, 4 months

Re: [Serusers] SER 2.0 installation - SER does not start due to missing modules

by Strassburger, Patrick

Hello Greger, I missed the mysql-devel package. Nevertheless now it claims on folowing: : [root@ser ser]# ser -c 0(9562) ERROR: load_module: could not open module </usr/local/lib/ser/modules/x mlrpc.so>: /usr/local/lib/ser/modules/xmlrpc.so: cannot open shared object file: No such file or directory 0(9562) parse error (75,13-14): failed to load module 0(9562) set_mod_param_regex: No module matching <xmlrpc> found 0(9562) parse error (142,20-21): Can't set module parameter 0(9562) parse error (235,16-17): unknown command, missing loadmodule? I installed php-xmlrpc-5.1.6-5.el5.i386.rpm and did another installation but still the same. (I did the following command for modules: "make group_include="standard mysql" all", "make group_include="standard mysql" installall") Do I miss anything here? Kind regards Patrick -----Ursprüngliche Nachricht----- Von: Greger V. Teigre [mailto:greger@teigre.com] Gesendet: Montag, 17. Dezember 2007 15:12 An: Strassburger, Patrick Cc: serusers(a)lists.iptel.org Betreff: Re: [Serusers] SER 2.0 installation - SER does not start due to missing modules You must do make install with the same group_include. Verify that you have mysql-devel and mysql rpm packages installed (required to compile and run). g-) Strassburger, Patrick wrote: Hello all, I am a newbie in SER and am failing since a few days installing SER 2.0. After several installation attempts I would like to ask you for some help. I did a "make group_include="standard mysql" all" but cannot see module mysql - where do I find those two modules and can I add them afterwards? Kind regards Patrick I get the following error and do not know how to resolve this: [root@ser ser]# ser -c 0(5613) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: /usr/local/lib/ser/modules/mysql.so: cannot open shared object file: No such file or directory 0(5613) parse error (55,13-14): failed to load module 0(5613) ERROR: load_module: could not open module </usr/local/lib/ser/modules/xmlrpc.so>: /usr/local/lib/ser/modules/xmlrpc.so: cannot open shared object file: No such file or directory 0(5613) parse error (75,13-14): failed to load module 0(5613) set_mod_param_regex: No module matching <xmlrpc> found 0(5613) parse error (142,20-21): Can't set module parameter 0(5613) parse error (235,16-17): unknown command, missing loadmodule? ERROR: bad config file (4 errors) [root@ser ser]# ls -l /usr/local/lib/ser/modules/ total 4944 -rwxr-xr-x 1 root root 67012 Dec 17 15:02 acc_db.so -rwxr-xr-x 1 root root 73256 Dec 17 15:02 acc_syslog.so -rwxr-xr-x 1 root root 69954 Dec 17 15:02 auth_db.so -rwxr-xr-x 1 root root 58083 Dec 17 15:02 auth.so -rwxr-xr-x 1 root root 37353 Dec 17 15:02 avp_db.so -rwxr-xr-x 1 root root 168776 Dec 17 15:02 avpops.so -rwxr-xr-x 1 root root 79122 Dec 17 15:02 avp.so -rwxr-xr-x 1 root root 279393 Dec 17 15:02 ctl.so -rwxr-xr-x 1 root root 72908 Dec 17 15:02 db_ops.so -rwxr-xr-x 1 root root 63015 Dec 17 15:02 dispatcher.so -rwxr-xr-x 1 root root 21612 Dec 17 15:02 diversion.so -rwxr-xr-x 1 root root 114544 Dec 17 15:02 domain.so -rwxr-xr-x 1 root root 45712 Dec 17 15:02 enum.so -rwxr-xr-x 1 root root 84369 Dec 17 15:02 exec.so -rwxr-xr-x 1 root root 81406 Dec 17 15:02 fifo.so -rwxr-xr-x 1 root root 53450 Dec 17 15:02 flatstore.so -rwxr-xr-x 1 root root 43426 Dec 17 15:02 gflags.so -rwxr-xr-x 1 root root 87582 Dec 17 15:02 lcr.so -rwxr-xr-x 1 root root 35891 Dec 17 15:02 maxfwd.so -rwxr-xr-x 1 root root 112643 Dec 17 15:02 mediaproxy.so -rwxr-xr-x 1 root root 87493 Dec 17 15:02 msilo.so -rwxr-xr-x 1 root root 187830 Dec 17 15:02 nathelper.so -rwxr-xr-x 1 root root 21211 Dec 17 15:02 options.so -rwxr-xr-x 1 root root 131901 Dec 17 15:02 pdt.so -rwxr-xr-x 1 root root 272121 Dec 17 15:02 permissions.so -rwxr-xr-x 1 root root 122166 Dec 17 15:02 pike.so -rwxr-xr-x 1 root root 26180 Dec 17 15:02 print.so -rwxr-xr-x 1 root root 47605 Dec 17 15:02 ratelimit.so -rwxr-xr-x 1 root root 152851 Dec 17 15:02 registrar.so -rwxr-xr-x 1 root root 114904 Dec 17 15:02 rr.so -rwxr-xr-x 1 root root 63288 Dec 17 15:02 sanity.so -rwxr-xr-x 1 root root 66950 Dec 17 15:02 sl.so -rwxr-xr-x 1 root root 34423 Dec 17 15:02 speeddial.so -rwxr-xr-x 1 root root 120815 Dec 17 15:02 textops.so -rwxr-xr-x 1 root root 43284 Dec 17 15:02 timer.so -rwxr-xr-x 1 root root 848970 Dec 17 15:02 tm.so -rwxr-xr-x 1 root root 117605 Dec 17 15:02 uac.so -rwxr-xr-x 1 root root 38801 Dec 17 15:02 unixsock.so -rwxr-xr-x 1 root root 38987 Dec 17 15:02 uri_db.so -rwxr-xr-x 1 root root 38611 Dec 17 15:02 uri.so -rwxr-xr-x 1 root root 351480 Dec 17 15:02 usrloc.so -rwxr-xr-x 1 root root 100362 Dec 17 15:02 xlog.so [root@ser ser]# ************************************************************************************* The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing security(a)colt.net and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ________________________________ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

16 years, 4 months

Re: [Serusers] SIP Express Bundle - let's get started

by Mike Trest - Personal

At 09:10 AM 12/17/2007, Greger V. Teigre wrote: >Sounds good, Mike. >As we use berlios.de, there's really no official CVS maintainer, so >my comment is as good as any. That is a stable CVS. I only asked for maintainer as standard courtesy to be able to check-in ongoing documentation for the project if such materials are to be stored there. >Why do you need a mirror? Only offered if team see a need for a separate site for safety or separate "read-only" distribution overhead. >I'm sure we can create a new cvs module in the official repository >(though we may want to evaluate whether to use berlios' subversion instead). My best developers friends in US and CA are in various stages of moving from old CVS to subversion. It started as personal preference based on ease-of-use. Functionality of SVN is moving onward and correcting some traditional 'pain' associated with CVS when used by multiple active users. Client side tools available and growing too. >If we use subversion, you can use svk to create a mirror. Yup. "It supports repository mirroring, disconnected operation, history-sensitive merging, and integrates with other version control systems, as well as popular visual merge tools. " A PERL script to automate smart mirroring within your own subversion site was made available in 2005. I do not know how widely it is used. But my guys liked it as a way to be even more selective. http://subversion.tigris.org/servlets/ReadMsg?listName=users&msgNo=32596&at… >g-) > >Mike Trest - Personal wrote: >>Greger, et. al. >> >>While I did volunteer for Documentation and Testing already, >>I am going to branch out and perform each step myself >>so we can "document as we design". >> >>To that end I am setting up two "target machines" in New York on which >>to install-test-document each step wearing the hat of the Enterprise-IT-Guy. >>I have a couple of techs that we can use in the role of "outside tester" who >>will strictly follow the documentation to give the procedures a >>good Q-A test. >>I can be ready in early Janurary. >> >>I would like to hear from the current CVS maintainer regards creation >>of third machine as a Subversion / CVS mirror. Can you contact me >>via EMAIL with some guidance? >> >>Regards, ..mike.. >> >>At 03:03 AM 12/16/2007, Greger V. Teigre wrote: >>>Using kickstart sounds good to me. I think we should keep >>>separate the different steps: >>>1. Create a base image of the OS >>>2. Install the iptel.org apps and dependencies >>>3. Do local configurations >>>4. Create deployable virtual machine >>> >>>If each of these steps are isolated, different people can be >>>responsible for the different steps. >>> >>>I have reorganized the project page into sections and incorporated >>>lots of input from Jeremy at >>><http://iptel.org/bundle/project>http://iptel.org/bundle/project >>>We now need to create a project plan, split into responsibilities, >>>and take some key decisions. >>>I think one key decision that we have already converged on is: for >>>first version use CentOS5 and create vmware appliance. >>>g-) >>> >>> >>>Jai Rangi wrote: >>>>Sounds good, >>>>Here is the script. Its been a while that we have used it. We >>>>might need to modify something. I can look into it later. Let me >>>>know if this is something you are looking for. >>>>************************ >>>>#!/bin/sh >>>># Need to add /bin/sh path >>>># This script will install the softwares required to build softswitch. >>>># Sysrequirements FC5, DELL 1950, >>>># Jai >>>># 12/11/06 >>>> >>>>HOSTNAME=`hostname` >>>>TEMPLATE=<http://192.168.2.201/> 192.168.1.1 >>>> >>>>if [ "`id -u`" != "0" -o `hostname` != "$HOSTNAME" ]; then >>>> printf "NEED TO BE ROOT AND TO RUN ON $HOSTNAME\n" >>>> exit 0 >>>>fi >>>> >>>>echo "You are ROOT on Make sure you know what are you doing, >>>> Press ENTER to continue" >>>> >>>>read >>>> >>>>echo "Server name = $HOSTNAME" >>>>echo "FTP Server = $TEMPLATE" >>>>echo "Press ENTER to start" >>>> >>>>read >>>> >>>>printf "PROCEEDING WITH INSTALLATION OF Softswitch on ${HOSTNAME} ...\n\n" >>>> >>>> >>>>printf "ARE YOU SURE YOU WANT TO CONTINUE (Y/N)?" >>>>read X >>>>if [ "x$X" != "xY" ]; then >>>> printf "aborting. Press Y or N \n" >>>> exit 0 >>>>fi >>>>printf "\n" >>>> >>>>mkdir //home/switch >>>>ln -s /home/switch /usr/local/ >>>> >>>> >>>>cd /usr/local/src >>>> >>>>echo "------INSTALLING freeradius -----------------------------" >>>> >>>>printf "Do you want to INSTALL FREERADIUS (Y/N)?" >>>>read X >>>>if [ "x$X" == "xY" ]; then >>>>cd /usr/local/src/ >>>>wget >>>><ftp://ftp.freeradius.org/pub/radius/old/freeradius-1.1.2.tar.gz>ftp://ftp.freeradius.org/pub/radius/old/freeradius-1.1.2.tar.gz >>>> >>>>tar zxvf freeradius-1.1.2.tar.gz >>>>cd freeradius-1.1.2 >>>>./configure >>>> >>>>make >>>>make install >>>>#cd .. >>>>echo "enable digest auth in radiusd.conf, configure >>>>clients.conf, create radius db and import tables." >>>> >>>>else >>>>printf "OK YOU Pressed N that means you don't want free radius. >>>>No Problem \n" >>>>fi >>>> >>>>echo "------ radius client lib -----------------------------" >>>>printf "Do you want to radius client lib (Y/N)?" >>>> >>>>read X >>>> >>>>if [ "x$X" == "xY" ]; then >>>>cd /usr/local/src/ >>>>wget >>>><http://download.berlios.de/radiusclient-ng/radiusclient-ng-0.5.2.tar.gz>http://download.berlios.de/radiusclient-ng/radiusclient-ng-0.5.2.tar.gz >>>> >>>> >>>>tar zxvf radiusclient-ng-0.5.2.tar.gz >>>>cd radiusclient-ng-0.5.2 >>>>./configure >>>>make >>>>make install >>>> >>>>#vi /etc/ld.so.conf >>>># /usr/local/lib >>>>cat "/usr/local/lib" > /etc/ld.so.conf.d/radius- i386.conf >>>> >>>>ldconfig >>>>cd .. >>>> >>>>else >>>>printf "OK YOU did not Pressed Y that means you don't want radius >>>>client lib. I don't care, I am just a script \n" >>>> >>>>fi >>>> >>>>echo "------ MEDIAPROXY -------------------" >>>>printf "Do you want to Mediaproxy (Y/N)?" >>>> >>>>read X >>>> >>>>if [ "x$X" == "xY" ]; then >>>>cd /usr/local/src/ >>>>wget >>>><http://mediaproxy.ag-projects.com/old/mediaproxy-1.4.2.tar.gz>http://mediaproxy.ag-projects.com/old/mediaproxy-1.4.2.tar.gz >>>>tar mediaproxy-1.4.2.tar.gz >>>>mv mediaproxy /usr/local/mediaproxy >>>> >>>>#cp mediaproxy.ini.sample mediaproxy.ini >>>> >>>>#vi mediaproxy.ini >>>># edit the options as per our envi. >>>>cd /usr/local/mediaproxy/ >>>>wget <ftp://$TEMPLATE/configure_ser>ftp://$TEMPLATE/configure_ser >>>>_server/configfiles/mediaproxy.ini >>>> >>>>cp /usr/local/mediaproxy/boot/mediaproxy.other /etc/init.d/mediaproxy >>>>/etc/init.d/mediaproxy start >>>>cd /usr/local/src/ >>>> >>>>else >>>>printf "OK YOU did not Pressed Y that means you dont want >>>>Mediaproxy. I dont care, But remember SIP users wont be able to talk \n" >>>>fi >>>> >>>>echo "------ ser -------------------" >>>>printf "Do you want to INSTALL SER (Y/N)?" >>>> >>>>read X >>>> >>>>if [ "x$X" == "xY" ]; then >>>> >>>>## We make changes in the Makefile for all the modules, build our >>>>own tar and store it on our ftp server. >>>>#wget >>>><http://ftp.iptel.org/pub/ser/0.9.6/src/ser-0.9.6_src.tar.gz>http://ftp.iptel.org/pub/ser/0.9.6/src/ser-0.9.6_src.tar.gz >>>> >>>>cd /usr/local/src/ >>>>wget >>>><ftp://$TEMPLATE/configure_ser_server/ser-0.9.6_bingo.tar.gz>ftp://$TEMPLATE/configure_ser_server/ser-0.9.6_bingo.tar.gz >>>>echo "Press ENTER to start" >>>>read >>>>tar zxvf ser-0.9.6_bingo.tar.gz >>>>echo "Press ENTER to start" >>>>read >>>> >>>>cd ser-0.9.6 >>>>pwd >>>> >>>>#cd modules/acc >>>>#vi Makefile >>>>#remove comment from sql and radius lines >>>> >>>>#vi Makefile >>>>#remove *_radius from exclude list >>>> >>>>make all >>>>make install >>>>cd /usr/local/etc/ser/ >>>>wget >>>><ftp://$TEMPLATE/configure_ser_server/configfiles/ser.cfg>ftp://$TEMPLATE/configure_ser_server/configfiles/ser.cfg >>>> >>>>else >>>>printf "OK YOU did not Pressed Y that means you don't want a >>>>softswitch you. Just playing with me HUHH, OK \n" >>>>fi >>>> >>>># >>>><http://www.openser.org/docs/openser-radius-1.0.x.html>http://www.openser.org/docs/openser-radius-1.0.x.html >>>># ---------------------------------------------- >>>>echo "------ APACHE -------------------" >>>>printf "Do you want to INSTALL APACHE (Y/N)?" >>>>read X >>>>if [ "x$X" == "xY" ]; then >>>>cd /usr/local/src/ >>>>wget >>>><http://www.axint.net/apache/httpd/httpd-2.2.3.tar.gz>http://www.axint.net/apache/httpd/httpd-2.2.3.tar.gz >>>>tar zxvf httpd-2.2.3.tar.gz >>>>cd httpd-2.2.3 >>>>./configure --enable-shared=max --enable-module=rewrite >>>>--enable-module=so --with-apxs2 >>>>make >>>>make install >>>> >>>>else >>>>printf "OK YOU did not Pressed Y that means you dont want APACHE. >>>>You might need this for serweb. \n" >>>>fi >>>> >>>>echo "------ IMAP -------------------" >>>>printf "Do you want to INSTALL IMAP, (Y/N)?" >>>>read X >>>> >>>>if [ "x$X" == "xY" ]; then >>>> >>>>cd /usr/local/src/ >>>>cd /usr/local/src/ >>>>#wget >>>><http://www.mirrorservice.org/sites/tp.cac.washington.edu/imap/old/imap-2004…>http://www.mirrorservice.org/sites/tp.cac.washington.edu/imap/old/imap-2004… >>>> >>>>wget >>>><ftp://192.168.2.201/configure_ser_server/imap-2004c1.tar.Z>ftp://192.168.2.201/configure_ser_server/imap-2004c1.tar.Z >>>> >>>>tar zxf imap-2004c1.tar.Z >>>> >>>>cd imap-2004c1 >>>>make slx SSLTYPE=none >>>>cd c-client/ >>>>cp c-client.a /usr/lib >>>>cp rfc822.h mail.h linkage.h /usr/include/ >>>> >>>>else >>>>printf "OK YOU did not Pressed Y that means you dont want APACHE. >>>>You might need this for serweb. \n" >>>>fi >>>> >>>> >>>>echo "------ PHP 4.xx -------------------" >>>>printf "Do you want to INSTALL PHP 4.xx, If you dont install this >>>>then DONT complain if your serweb doesnt work (Y/N)?" >>>> >>>>read X >>>> >>>>if [ "x$X" == "xY" ]; then >>>> >>>>cd /usr/local/src/ >>>>wget >>>><http://museum.php.net/php4/php-4.3.10.tar.gz>http://museum.php.net/php4/php-4.3.10.tar.gz >>>>tar zxvf php-4.3.10.tar.gz >>>>cd php-4.3.10 >>>>./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql >>>>--with-imap >>>>make >>>>make install >>>> >>>>cp php.ini-dist /usr/local/lib/php.ini >>>>cd /usr/local/apache2/ >>>>wget >>>><ftp://$TEMPLATE/configure_ser_server/configfiles/httpd.conf>ftp://$TEMPLATE/configure_ser_server/configfiles/httpd.conf >>>> >>>> >>>>#vi /usr/local/apache2/conf/httpd.conf >>>># AddType application/x-httpd-php .php .phtml >>>># LoadModule php4_module libexec/libphp4.so >>>># >>>># modify the index.html line and add index.php to the list >>>># >>>># Listen 81 >>>> >>>>/usr/local/apache2/bin/apachectl start >>>> >>>>else >>>>printf "OK YOU did not Pressed Y that means you refused to >>>>install PHP. You will need this for serweb. \n" >>>>fi >>>> >>>>echo "------ PHP 4.xx -------------------" >>>>printf "Do you want to INSTALL PHP 4.xx, If you dont install this >>>>then DONT complain if your serweb doesnt work (Y/N)?" >>>>read X >>>> >>>>if [ "x$X" == "xY" ]; then >>>> >>>>cd /usr/local/src/ >>>> >>>>wget >>>><http://ftp.iptel.org/pub/serweb/serweb-0.9.6.tar.gz>http://ftp.iptel.org/pub/serweb/serweb-0.9.6.tar.gz >>>> >>>>tar zxvf serweb-0.9.6.tar.gz >>>> >>>>mv serweb-0.9.6 serweb >>>># next few line have been taken care of httpd.conf in apache installation. >>>> >>>>#vi /usr/local/apache2/conf/httpd.conf >>>> >>>>#Alias /serweb "/usr/local/serweb/html/" >>>> >>>>#<Directory "/usr/local/serweb/html"> >>>># AllowOverride None >>>># Options None >>>># Order allow,deny >>>># Allow from all >>>>#</Directory> >>>> >>>>cd /usr/local/serweb/config >>>> >>>>#vi config* >>>> modify all config files are per your env. >>>> >>>>#edit: >>>>#vi /usr/local/etc/ser/ser.cfg >>>>#fifo_mode=666 >>>> >>>>#Send daily missed calls >>>>#Crontab line: >>>>#5 0 * * * /usr/local/bin/php >>>>/usr/local/serweb/scripts/cron_job/send_daily_missed_calls.php >>>> >>>>#Server monitoring >>>>#Crontab line: >>>>#* * * * * /usr/local/bin/php >>>>/usr/local/serweb/scripts/cron_job/read_ser_moni.php >>>> >>>>else >>>>printf "OK YOU did not Pressed Y that means you refused to >>>>install PHP. You will need this for serweb. \n" >>>>fi >>>> >>>> >>>>echo "------ DIALIP_ADMIN -------------------" >>>>printf "Do you want to INSTALL DIALUP_ADMIN (Y/N)?" >>>>read X >>>> >>>>if [ "x$X" == "xY" ]; then >>>> >>>>cd /usr/local/src/ >>>>wget >>>><http://nchc.dl.sourceforge.net/sourceforge/dialup-admin/dialup_admin-1.62.t…>http://nchc.dl.sourceforge.net/sourceforge/dialup-admin/dialup_admin-1.62.t… >>>> >>>> >>>>tar zxvf dialup_admin- 1.62.tar.gz >>>>mv dialup_admin /usr/local/radiusadmin >>>> >>>>#vi /usr/local/apache2/conf/httpd.conf >>>> >>>>#Alias /radius "/usr/local/radiusadmin/htdocs/" >>>> >>>>#<Directory "/usr/local/radiusadmin/htdocs"> >>>># AllowOverride None >>>># Options None >>>># Order allow,deny >>>># Allow from all >>>>#</Directory> >>>> >>>>#cd /usr/local/radiusadmin/sql >>>># import all sql queries to radius database >>>>#cd /usr/local/radiusadmin/conf >>>># modify config files >>>> >>>> >>>>********************** >>>> >>>> >>>>On Dec 10, 2007 9:15 PM, ram >>>><<mailto:talk2ram@gmail.com>talk2ram(a)gmail.com > wrote: >>>> >>>>On Dec 10, 2007 11:02 PM, Jai Rangi >>>><<mailto:jprangi@gmail.com>jprangi(a)gmail.com> wrote: >>>>Preparing Kickstart file is a good idea. >>>>How about running a post installation script in the kickstart >>>>file. We have done this a lots on time in FC*. The process should >>>>be something like this, >>>>1. Build a default kickstart file that will install all the >>>>required packages for all the ser components. >>>>2. The kickstart file have an option to run a post installation script. >>>>3. Now we need to have one zip file of all the components we want >>>>to install related to ser. (ser, werbwer, sems, sipp, sppsak >>>>etc). That file can be placed either on the CDs or can be >>>>downloaded from somewhere. All the components can be packaged in >>>>the one zip file of they can be downloaded separately. >>>>4. The script can be interactive. >>>> >>>> >>>> >>>>yes that will be the idea, for the CD install >>>> >>>>after install of OS, we can run post install script to compile >>>>rest all required for >>>>SER ( or compile already for the same OS Distro and move them >>>>directly to the respective Directory) >>>> >>>> >>>> >>>> >>>>BTW I have a small postinstallation shell script like that, and I >>>>can share that. >>>> >>>> >>>>post to group, may be if require people may use. >>>> >>>>ram >>>> >>>> >>>>-Jai >>>> >>>> >>>>On Dec 10, 2007 3:42 AM, SIP <<mailto:sip@arcdiv.com> >>>>sip(a)arcdiv.com> wrote: >>>>Greger V. Teigre wrote: >>>> > [removed sems, semsdev, and serdev from cc] >>>> > >>>> > >>>> > SIP wrote: >>>> >> Something I noted about the project. While I am all for a >>>> virtual image >>>> >> for testing purposes and getting things up and running while we're >>>> >> creating this project, I think the ultimate goal should be something >>>> >> like an ISO that's ready to go on a server. There are many of >>>> us in the >>>> >> systems world who have not bought into the whole virtualisation >>>> >> marketing gimmick when it comes to system deployment, and for >>>> the casual >>>> >> home user who's less comfortable with using VMs for an actual >>>> production >>>> >> system (which is, to be honest, a lot of people), it might be >>>> easier in >>>> >> the long term to get everything the way we want it and then >>>> make an ISO >>>> >> that's ready to drop onto whatever machine with all the >>>> components we need. >>>> >> >>>> > Ok. When you say "ISO that's ready to drop onto", do you have a >>>> > particular procedure in mind? >>>> > >>>> > g-) >>>>Something like taking a kickstart file and making an installable livecd >>>>from it (something similar to the LiveCD berlios project). I don't KNOW >>>>of one that works to create installable ISOs in CentOS, but I'm sure >>>>there must be... somewhere... maybe....? >>>>N. >>>>_______________________________________________ >>>>Serusers mailing list >>>><mailto:Serusers@lists.iptel.org>Serusers(a)lists.iptel.org >>>>http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>>> >>>>_______________________________________________ >>>>Serusers mailing list >>>><mailto:Serusers@lists.iptel.org>Serusers(a)lists.iptel.org >>>>http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>_______________________________________________ >>>>Serusers mailing list >>>><mailto:Serusers@lists.iptel.org>Serusers(a)lists.iptel.org >>>> >>>>http://lists.iptel.org/mailman/listinfo/serusers >>>> >>> >>>_______________________________________________ >>>Serusers mailing list >>><mailto:Serusers@lists.iptel.org>Serusers(a)lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serusers >> >> >> >> >>_______________________________________________ >>Serusers mailing list >><mailto:Serusers@lists.iptel.org>Serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >>

16 years, 4 months

[Serusers] SER Video call GXV3000

by FaberK

Hi to All, I got a SER 0.8.14 up and running since more than 2 years. It's perfect. Now I'm testing 2 Grandstream GXV3000. They are able to register and make calls, but nothing to do with Video calls. I've tryied them on Asterisk, and they work. Video calls are great. I've notice that they use port 8002 for the video and on SER I got the rtpproxy listening on 8000, maybe is this the problem or is something else? Thanks to all. Have a nice day. -- .:FaberK:.

16 years, 4 months

[Serusers] SER 2.0 installation - SER does not start due to missing modules

by Strassburger, Patrick

Hello all, I am a newbie in SER and am failing since a few days installing SER 2.0. After several installation attempts I would like to ask you for some help. I did a "make group_include="standard mysql" all" but cannot see module mysql - where do I find those two modules and can I add them afterwards? Kind regards Patrick I get the following error and do not know how to resolve this: [root@ser ser]# ser -c 0(5613) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: /usr/local/lib/ser/modules/mysql.so: cannot open shared object file: No such file or directory 0(5613) parse error (55,13-14): failed to load module 0(5613) ERROR: load_module: could not open module </usr/local/lib/ser/modules/xmlrpc.so>: /usr/local/lib/ser/modules/xmlrpc.so: cannot open shared object file: No such file or directory 0(5613) parse error (75,13-14): failed to load module 0(5613) set_mod_param_regex: No module matching <xmlrpc> found 0(5613) parse error (142,20-21): Can't set module parameter 0(5613) parse error (235,16-17): unknown command, missing loadmodule? ERROR: bad config file (4 errors) [root@ser ser]# ls -l /usr/local/lib/ser/modules/ total 4944 -rwxr-xr-x 1 root root 67012 Dec 17 15:02 acc_db.so -rwxr-xr-x 1 root root 73256 Dec 17 15:02 acc_syslog.so -rwxr-xr-x 1 root root 69954 Dec 17 15:02 auth_db.so -rwxr-xr-x 1 root root 58083 Dec 17 15:02 auth.so -rwxr-xr-x 1 root root 37353 Dec 17 15:02 avp_db.so -rwxr-xr-x 1 root root 168776 Dec 17 15:02 avpops.so -rwxr-xr-x 1 root root 79122 Dec 17 15:02 avp.so -rwxr-xr-x 1 root root 279393 Dec 17 15:02 ctl.so -rwxr-xr-x 1 root root 72908 Dec 17 15:02 db_ops.so -rwxr-xr-x 1 root root 63015 Dec 17 15:02 dispatcher.so -rwxr-xr-x 1 root root 21612 Dec 17 15:02 diversion.so -rwxr-xr-x 1 root root 114544 Dec 17 15:02 domain.so -rwxr-xr-x 1 root root 45712 Dec 17 15:02 enum.so -rwxr-xr-x 1 root root 84369 Dec 17 15:02 exec.so -rwxr-xr-x 1 root root 81406 Dec 17 15:02 fifo.so -rwxr-xr-x 1 root root 53450 Dec 17 15:02 flatstore.so -rwxr-xr-x 1 root root 43426 Dec 17 15:02 gflags.so -rwxr-xr-x 1 root root 87582 Dec 17 15:02 lcr.so -rwxr-xr-x 1 root root 35891 Dec 17 15:02 maxfwd.so -rwxr-xr-x 1 root root 112643 Dec 17 15:02 mediaproxy.so -rwxr-xr-x 1 root root 87493 Dec 17 15:02 msilo.so -rwxr-xr-x 1 root root 187830 Dec 17 15:02 nathelper.so -rwxr-xr-x 1 root root 21211 Dec 17 15:02 options.so -rwxr-xr-x 1 root root 131901 Dec 17 15:02 pdt.so -rwxr-xr-x 1 root root 272121 Dec 17 15:02 permissions.so -rwxr-xr-x 1 root root 122166 Dec 17 15:02 pike.so -rwxr-xr-x 1 root root 26180 Dec 17 15:02 print.so -rwxr-xr-x 1 root root 47605 Dec 17 15:02 ratelimit.so -rwxr-xr-x 1 root root 152851 Dec 17 15:02 registrar.so -rwxr-xr-x 1 root root 114904 Dec 17 15:02 rr.so -rwxr-xr-x 1 root root 63288 Dec 17 15:02 sanity.so -rwxr-xr-x 1 root root 66950 Dec 17 15:02 sl.so -rwxr-xr-x 1 root root 34423 Dec 17 15:02 speeddial.so -rwxr-xr-x 1 root root 120815 Dec 17 15:02 textops.so -rwxr-xr-x 1 root root 43284 Dec 17 15:02 timer.so -rwxr-xr-x 1 root root 848970 Dec 17 15:02 tm.so -rwxr-xr-x 1 root root 117605 Dec 17 15:02 uac.so -rwxr-xr-x 1 root root 38801 Dec 17 15:02 unixsock.so -rwxr-xr-x 1 root root 38987 Dec 17 15:02 uri_db.so -rwxr-xr-x 1 root root 38611 Dec 17 15:02 uri.so -rwxr-xr-x 1 root root 351480 Dec 17 15:02 usrloc.so -rwxr-xr-x 1 root root 100362 Dec 17 15:02 xlog.so [root@ser ser]# ************************************************************************************* The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing security(a)colt.net and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.

16 years, 4 months

← Newer
1
...
7
8
9
10
11
12
13
...
24
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2007