sr-users November 2007

sr-users@lists.kamailio.org

138 participants
248 discussions

[OpenSER-Users] error: use_media_proxy(): out of memory
by Tomasz Zieleniewski 26 Nov '07

26 Nov '07

Hi, I am using media proxy for nat handling when I invoke use_media_proxy() for some calls I get the following error: error: use_media_proxy(): out of memory please point me what is wrong?? (I know that some problem with memory:) but why?) Cheers Tomasz

1 0

Re: [Serusers] error: use_media_proxy(): out of memory
by Jiri Kuthan 26 Nov '07

26 Nov '07

memory leak? nathelper may provide you with similar functionality and there is a good chance you will not see this problem. -jiri At 13:20 26/11/2007, Tomasz Zieleniewski wrote: >Hi, > >I am using media proxy for nat handling when I invoke >use_media_proxy() for some calls from my >pstn gateway I get the following error: >error: use_media_proxy(): out of memory >please point me what is wrong?? >(I know that some problem with memory:) but why?) > >cheers >tomasz >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] Can SER support MySQL 5.0.22
by roayu 26 Nov '07

26 Nov '07

Hi there! Would like to ask, can SER 0.9.6 support MySQL 5.0.22 ? I got the following errors when I tried start SER and to connect to MySQL: [root@localhost ~]# /usr/local/sbin/ser 0(3291) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: libmysqlclient.so.14: cannot open shared object file: No such file or directory 0(3291) parse error (31,13-14): failed to load module ERROR: bad config file (1 errors) Thanks. Roa Yu

3 2

[Serusers] setavpflag() - how to access avp afterwards
by Tomasz Zieleniewski 26 Nov '07

26 Nov '07

Hi, How can I access avps from the Route header set with the usage of setavpflag() method after receiving of the message? Are they somehow accessible through global avps?? Cheers tomasz

2 2

[Serusers] error: use_media_proxy(): out of memory
by Tomasz Zieleniewski 26 Nov '07

26 Nov '07

Hi, I am using media proxy for nat handling when I invoke use_media_proxy() for some calls from my pstn gateway I get the following error: error: use_media_proxy(): out of memory please point me what is wrong?? (I know that some problem with memory:) but why?) cheers tomasz

1 0

[OpenSER-Users] WeSIP and Click2dial application
by Daniel 26 Nov '07

26 Nov '07

Hi all, Can somebody help me to install an run WeSip with Click2dial application ? Is there some documentation file about it ? Regards, daniel -- Daniel Grotti ________________________ e-mail : d.grotti(a)gmail.com

2 1

[OpenSER-Users] Modify $au to lowercase
by Peter P GMX 26 Nov '07

26 Nov '07

Hello, is there any chance to modify the authorization user name? I have the following scenario. We do allow only lowercase usernames when users are registering. So the md5 password is created and stored based on lowercase letters. When a user receives his account data he might enter his username in camelcase in his user agent. So when he tries to register, it fails, as the md5 hash based on the camelcased username is different. I tried to use the perl module, put the username to lowercase and put it back to OpenSER via avp_pushto. But Openser only allows $ru,$du,$br to be modified. Do I have a chance to modify $au? Best regards Peter

6 10

Re: [Serusers] Can SER support 3-way Conference
by roayu 26 Nov '07

26 Nov '07

Hi, I managed to start SEMS as well as the 2 SERs. Now, I'm not sure how to start a conference using SEMS. I would like to have the follwing conference: UA1 call to UA2, the UA2 call to UA3. Then UA2 assign the conference call. UA1 --> UA2 (Agent who starts the conference) --> UA3 Conference : UA1 + UA2 + UA3 Can anyone guide me on how to do so? Thanks. Roa Yu -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of roayu Sent: Monday, November 26, 2007 9:44 AM To: Stefan Sayer Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Can SER support 3-way Conference Hi Stefan, Ops, I thought I installed the g++ ... Anyway, thanks for ur help! Really appreciate that. Btw, previously I do have one SER running in the machine. Now, I'm having 2 SERs and 1 SEMS. So, do I need to configure anything on my 1st SER? Or I only need to configure on the SIP-stack SER? If no, where else that I need to configure? Thanks. Roa Yu -----Original Message----- From: Stefan Sayer [mailto:stefan.sayer@iptego.de] Sent: Saturday, November 24, 2007 7:02 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Can SER support 3-way Conference Hello, why not have a look at what is print on the screen? make[3]: g++: Command not found You either havent g++ installed (you will need at least g++ 3.4 - but I would recommend 4.1, see README; on debian: apt-get install g++-4.1), or you don't have a symlink to it: ln -s /usr/bin/g++-x.y /usr/bin/g++. hth Stefan roayu wrote: > Hi Stefan, > > The following are the output I got after re-run the 'make install' on SEMS. > > [root@localhost sems-0.10.0-rc2]# make install > > make[1]: Entering directory `/usr/local/src/sems-0.10.0-rc2/apps' > > make[2]: Entering directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > make[3]: Entering directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > make[3]: Nothing to be done for `deps'. > make[3]: Leaving directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > make[3]: Entering directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > g++ -I ../../core -Wall -Wno-reorder -fPIC -g -O2 -D_DEBUG -D_THREAD_SAFE > -D_REENTRANT -DVERSION='"0.10.0-rc2"' -DARCH='"i386"' -DOS='"linux"' -c > AnnounceB2B.cpp -o AnnounceB2B.o > make[3]: g++: Command not found > make[3]: *** [AnnounceB2B.o] Error 127 > make[3]: Leaving directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > make[2]: [all] Error 2 (ignored) > mkdir -p /usr/local/lib/sems/audio/ann_b2b > mkdir -p /usr/local/lib/sems/plug-in/ > touch /usr/local/lib/sems/plug-in//ann_b2b.so ; \ > install -m 755 ann_b2b.so /usr/local/lib/sems/plug-in/ > install: cannot stat `ann_b2b.so': No such file or directory > make[2]: *** [install] Error 1 > make[2]: Leaving directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' .... -- Stefan Sayer VoIP Services stefan.sayer(a)iptego.de www.iptego.de iptego GmbH Am Borsigturm 40 13507 Berlin Germany Amtsgericht Charlottenburg, HRB 101010 Geschaeftsfuehrer: Alexander Hoffmann _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[OpenSER-Users] Mediaproxy relay and mixed network situation
by Antoine Fressancourt 26 Nov '07

26 Nov '07

Hello list, I have a question about media relay in a quite particular situation. I have two users, say A and B, connected on a softphone and a "hard" phone. These two devices are on two different networks, and media proxy must be used to communicate between the two. When A calls B with his softphone, if B is registered on both the softphone and the "hard" one, the two phones ring. but when B answers with the softphone, the request is flagged to use the media proxy. Do you know how I can do in order to avoid this behaviour ? Thank you in advance for your answer, Antoine

1 0

Re: [Serusers] Can SER support 3-way Conference
by roayu 25 Nov '07

25 Nov '07

Hi Stefan, Ops, I thought I installed the g++ ... Anyway, thanks for ur help! Really appreciate that. Btw, previously I do have one SER running in the machine. Now, I'm having 2 SERs and 1 SEMS. So, do I need to configure anything on my 1st SER? Or I only need to configure on the SIP-stack SER? If no, where else that I need to configure? Thanks. Roa Yu -----Original Message----- From: Stefan Sayer [mailto:stefan.sayer@iptego.de] Sent: Saturday, November 24, 2007 7:02 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Can SER support 3-way Conference Hello, why not have a look at what is print on the screen? make[3]: g++: Command not found You either havent g++ installed (you will need at least g++ 3.4 - but I would recommend 4.1, see README; on debian: apt-get install g++-4.1), or you don't have a symlink to it: ln -s /usr/bin/g++-x.y /usr/bin/g++. hth Stefan roayu wrote: > Hi Stefan, > > The following are the output I got after re-run the 'make install' on SEMS. > > [root@localhost sems-0.10.0-rc2]# make install > > make[1]: Entering directory `/usr/local/src/sems-0.10.0-rc2/apps' > > make[2]: Entering directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > make[3]: Entering directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > make[3]: Nothing to be done for `deps'. > make[3]: Leaving directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > make[3]: Entering directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > g++ -I ../../core -Wall -Wno-reorder -fPIC -g -O2 -D_DEBUG -D_THREAD_SAFE > -D_REENTRANT -DVERSION='"0.10.0-rc2"' -DARCH='"i386"' -DOS='"linux"' -c > AnnounceB2B.cpp -o AnnounceB2B.o > make[3]: g++: Command not found > make[3]: *** [AnnounceB2B.o] Error 127 > make[3]: Leaving directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' > make[2]: [all] Error 2 (ignored) > mkdir -p /usr/local/lib/sems/audio/ann_b2b > mkdir -p /usr/local/lib/sems/plug-in/ > touch /usr/local/lib/sems/plug-in//ann_b2b.so ; \ > install -m 755 ann_b2b.so /usr/local/lib/sems/plug-in/ > install: cannot stat `ann_b2b.so': No such file or directory > make[2]: *** [install] Error 1 > make[2]: Leaving directory `/usr/local/src/sems-0.10.0-rc2/apps/ann_b2b' .... -- Stefan Sayer VoIP Services stefan.sayer(a)iptego.de www.iptego.de iptego GmbH Am Borsigturm 40 13507 Berlin Germany Amtsgericht Charlottenburg, HRB 101010 Geschaeftsfuehrer: Alexander Hoffmann

1 0

← Newer
1
2
3
4
5
6
7
8
9
...
25
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2007