sr-users August 2006

sr-users@lists.kamailio.org

184 participants
360 discussions

Re: [Users] rtpproxy or RTPProxy, where to download or checkout--found it:). Re: Users Digest, Vol 15, Issue 61

by Mark Kent

In the RTPproxy source code, if you look at rtpp_log.h you really get the impression that syslog() functionality can be dropped in with ease. I still believe that, and believe it can be elegant, despite the fact that my solution is fairly crappy. But, it's done... so here it is (it relies on dprint.[ch] from the openser1.1 distribution): After ./configure, do this: In Makefile, change CFLAGS line like this: CFLAGS = -g -O2 -DUSESYSLOG -I../openser-1.1.0-tls (point to wherever you build openser) In rtpp_log.h, bracket the existing macros with this: #ifdef USESYSLOG #include "dprint.h" #define rtpp_log_open(app, call_id, flag) (0) #define rtpp_log_write(level, handle, format, args...) LOG(level, format, ##args) #define rtpp_log_ewrite(level, handle, format, args...) \ do { \ LOG(level, format, ##args); \ LOG(level, ": %s\n", strerror(errno)); \ } while(0); #define rtpp_log_close(handle) while (0) {} #else /* USESYSLOG */ {existing macros starting with rtpp_log_open and including rtpp_log_close} #endif /* USESYSLOG */ and stuff these lines up near the top of main.c, around line 64: #ifdef USESYSLOG int debug = 1; int log_stderr = 0; int log_facility = LOG_LOCAL7; char* log_name = "foobar"; int pt = 0, process_no = 0; #endif The link will fail when you do make, but just copy-and-paste the failed link command back into the shell and add ../openser-1.1.0-tls/dprint.o to the end of the line and it'll link, and run, and log. Also, some OS (Solaris) will require you to open and close the syslog channel. So, if you need to do that, then you need to define the rtpp_log_open and rtpp_log_close macros too. I'm on freebsd, and it seems I don't need to do that. -mark P.S. If someone has an elegant solution to this then please post it.

18 years, 5 months

[Serusers] SER / Missing call records

by Darren Sessions

All, We're experiencing a problem with missing call records. There is nothing in the log files that indicate a problem either with SER or our database server and likewise there is nothing in the database server's logs to indicate a problem. System loads are within reason on both servers, network connectivity has been tested and verified, and a through hardware shakedown on both boxes has been completed without any errors. We first noticed this problem when our underlying vendor's bill (based on minutes of course) did not correspond with our own. Upon doing a CDR comparison (based on what was in both the acc and calls tables), we were able to verify that the calls in dispute were indeed ours (based on the sip call-id's IP addresses). We're processing roughly 1.4 million calls per day on this SER server in question. Out of those calls, 508 calls (give or take a couple hundred) with a total duration of over 5,300 minutes - can not be accounted for in any of the SER database tables. We're running 0.9.5-pre1 with Suse Enterprise Server 9.0 (2.6.11 Kernel). Server is an HP DL380 with dual 3.2GHz processors with 6GB physical ram (only 1.4GB in use system wide); disk space is not an issue as well (only 10% in use). We've scoured the mailing lists and change logs for any hint of an issue similar to ours without any results. The closest we've been able to come that's anywhere near along the lines of our issue in any way that made any sense were these posts: http://lists.iptel.org/pipermail/serdev/2003-August/000602.html http://lists.iptel.org/pipermail/serusers/2005-February/015102.html At this point, we're not sure if this issue has something to do with the FIFO and SER making bulk dump uploads with call data to the database, or some other issue along those lines - or if this is a new issue all together. Any help would be greatly appreciated. Thanks, - Darren Fifo settings: fifo="/tmp/ser_fifo" fifo_db_url="mysql://xxx:xxx@xxx/serdb" Here are our module specific parameters: # -- timers -- modparam("tm", "wt_timer", 10) modparam("tm", "retr_timer1p1", 2) # -- usrloc params -- modparam("usrloc", "db_mode", 2) # -- database URL -- modparam("usrloc|acc|auth_db|group","db_url","mysql://xxx:xxx@xxx/serdb" ) # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth","secret","xxx") # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- Nathelper -- modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 10) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_disable", 1) # -- acc params -- modparam("acc", "db_flag", 3)

18 years, 5 months

[Serusers] Numbering Plan

by Daniel Mirrha Santos

Does anybody knows if I can create a numbering plan using a database? How is the easiest mode to do a numbering plan on ser? Thanks, Daniel

18 years, 5 months

Re: [Users] 403 Forbidden-----onsip configs testing. user not able to register

by Ferianto siregar

Hi, Ram its Not looking up in aliases table , it look ups only on location table. the each request and responses . So, You have to add your domain in the domain table by using : insert into domain values('urs_domain', ' date) ; in openser databases tables. I do hope it can help you. Thanks. On 8/22/06, ram wrote: > > Hi all > > iam trying to read the getting started document from onsip > when iam configuring pstn-gw.cfg > with the below config > > when the X-lite user try to loging , SIP/2.0 403 Forbidden, in the Log of > X-lite > > what is wrong , even i have changed AVP after reading module configs in > openser. > > any one suggest me what is wrong iam doing here > > Ram > > ----------------- > openser.cfg > # > # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > debug=9 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > #fork=no > #log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > listen=myip > port=5060 > children=4 > fifo="/tmp/openser_fifo" > fifo_db_url="mysql://openser:openserrw@localhost /openser" > > > # ------------------ module loading > ---------------------------------- > > > loadmodule "/usr/local/lib/openser/modules/mysql.so" > loadmodule "/usr/local/lib/openser/modules/sl.so" > loadmodule "/usr/local/lib/openser/modules/tm.so" > loadmodule "/usr/local/lib/openser/modules/rr.so" > loadmodule "/usr/local/lib/openser/modules/maxfwd.so" > loadmodule "/usr/local/lib/openser/modules/usrloc.so" > loadmodule "/usr/local/lib/openser/modules/registrar.so" > loadmodule "/usr/local/lib/openser/modules/textops.so" > loadmodule "/usr/local/lib/openser/modules/auth.so" > loadmodule "/usr/local/lib/openser/modules/auth_db.so" > loadmodule "/usr/local/lib/openser/modules/uri.so" > loadmodule "/usr/local/lib/openser/modules/uri_db.so" > loadmodule "/usr/local/lib/openser/modules/domain.so" > loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" > loadmodule "/usr/local/lib/openser/modules/nathelper.so" > loadmodule "/usr/local/lib/openser/modules/avpops.so" > loadmodule "/usr/local/lib/openser/modules/permissions.so" > > modparam("auth_db|permissions|uri_db|usrloc","db_url", > "mysql://openser:openserrw@localhost/openser") > modparam("auth_db", "calculate_ha1", 1) > modparam("auth_db", "password_column", "password") > > modparam("nathelper", "rtpproxy_disable", 1) > modparam("nathelper", "natping_interval", 0) > > modparam("mediaproxy","natping_interval", 30) > modparam("mediaproxy","mediaproxy_socket", > "/var/run/mediaproxy.sock") > modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") > modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") > > modparam("usrloc", "db_mode", 2) > modparam("auth_db", "calculate_ha1", yes) > modparam("auth_db", "password_column", "password") > > modparam("registrar", "nat_flag", 6) > > modparam("rr", "enable_full_lr", 1) > > modparam("tm", "fr_timer_avp", "i:25") > modparam("tm", "fr_inv_timer_avp", "i:25") > > modparam("permissions", "db_mode", 1) > modparam("permissions", "trusted_table", "trusted") > > route { > > # > ----------------------------------------------------------------- > # Sanity Check Section > # > ----------------------------------------------------------------- > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483", "Too Many Hops"); > return; > }; > > if (msg:len > max_len) { > sl_send_reply("513", "Message Overflow"); > return; > }; > > # > ----------------------------------------------------------------- > # Record Route Section > # > ----------------------------------------------------------------- > if (method=="INVITE" && client_nat_test("3")) { > # INSERT YOUR IP ADDRESS HERE > > record_route_preset("myproxyip:5060;nat=yes"); > } else if (method!="REGISTER") { > record_route(); > }; > > # > ----------------------------------------------------------------- > # Call Tear Down Section > # > ----------------------------------------------------------------- > if (method=="BYE" || method=="CANCEL") { > end_media_session(); > }; > > # > ----------------------------------------------------------------- > # Loose Route Section > # > ----------------------------------------------------------------- > if (loose_route()) { > > if (has_totag() && (method=="INVITE" || method=="ACK")) { > > if > (client_nat_test("3")||search("^Route:.*;nat=yes")){ > setflag(6); > use_media_proxy(); > }; > }; > > route(1); > return; > }; > > # > ----------------------------------------------------------------- > # Call Type Processing Section > # > ----------------------------------------------------------------- > if (!is_uri_host_local()) { > if (is_from_local() || allow_trusted()) { > route(4); > route(1); > } else { > sl_send_reply("403", "Forbidden"); > }; > return; > }; > > if (method=="CANCEL") { > route(1); > return; > } else if (method=="INVITE") { > route(3); > return; > } else if (method=="REGISTER") { > route(2); > return; > }; > > lookup("aliases"); > if (uri!=myself) { > route(4); > route(1); > return; > }; > > if (!lookup("location")) { > sl_send_reply("404", "User Not Found"); > return; > }; > > route(1); > } > > route[1] { > > # > ----------------------------------------------------------------- > # Default Message Handler > # > ----------------------------------------------------------------- > > t_on_reply("1"); > > if (!t_relay()) { > > if (method=="INVITE" || method=="ACK") { > end_media_session(); > }; > > sl_reply_error(); > }; > } > > route[2] { > > # > ----------------------------------------------------------------- > # REGISTER Message Handler > # > ----------------------------------------------------------------- > > sl_send_reply("100", "Trying"); > > if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { > setflag(6); > fix_nated_register(); > force_rport(); > }; > > if (!www_authorize("","subscriber")) { > www_challenge("","0"); > return; > }; > > if (!check_to()) { > sl_send_reply("401", "Unauthorized"); > return; > }; > > consume_credentials(); > > if (!save("location")) { > sl_reply_error(); > }; > } > > route[3] { > > # > ----------------------------------------------------------------- > # INVITE Message Handler > # > ----------------------------------------------------------------- > > if (!allow_trusted()) { > > if (!proxy_authorize("","subscriber")) { > proxy_challenge("","0"); > return; > } else if (!check_from()) { > sl_send_reply("403", "Use From=ID"); > return; > }; > > consume_credentials(); > }; > > if (client_nat_test("3")) { > setflag(7); > force_rport(); > fix_nated_contact(); > }; > > if (uri=~"^sip:1[0-9]{10}@") { > strip(1); > }; > > lookup("aliases"); > if (uri!=myself) { > route(4); > route(1); > return; === message truncated === --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

18 years, 5 months

[Users] Problem with forking

by Claudio Miceli

I am in a big trouble. I am using openser 1.0.1 and I am still having some problems with redirect. I get some numbers in myredirect and I try to pass it with t_relay(), but at this moment everything gets confused. The calls do not happen sequentially or in any logical order. Is there another way of doing the forking ? Am i doing something terribly wrong ? And sometimes when I make a call my openser sends messages to just one client and not to the other, or sends to both but with a great time between them. What could it be ? Do someone know it ? Thanks for helping. Claudio Miceli de Farias

18 years, 5 months

RE: [Users] registered("location")

by Helge Waastad

Hi again, I have: modparam("group|auth_db|usrloc|uri_db|speeddial|registrar|avpops|alias_d b", "use_domain", 1) In location table: | username | domain | | | | | 123456 | smartnet.no | | 654321 | smartnet.no | If I set usrloc|registrar use_domain=0, the only thing that changes is that the domain column is empty. Br hw -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: 22. august 2006 18:06 To: Helge Waastad Cc: Users(a)openser.org Subject: Re: [Users] registered("location") strange.... do you have the use_domain param enabled or disabled? could you check if the location table has for "user" column the correct format (all entries): username@domain (if use_domain is on) username (if use_domain is off) regards, bogdan Helge Waastad wrote: >Hi, >Ive just stopped my openser server, >deleted all entries in the location table and restarted the OpenSER >server. > >Still i get the same: > >BUG:usrloc:db_load_urecord: AOR has no @ while use_domain is enabled > >message. > >br hw > >tir, 22,.08.2006 kl. 16.36 +0300, skrev Bogdan-Andrei Iancu: > > >>Hi, >> >>my guess is you had usrloc with use_domain and with contacts into the >>location table you switched use_domain on. >>BUG:usrloc:db_load_urecord: AOR has no @ while use_domain is enabled >>please remove the entire contact of the location table and try again. >> >>regards, >>bogdan >> >>Helge Waastad wrote: >> >> >> >>>Hi, >>> >>>I receive a >>>BUG:usrloc:db_load_urecord: AOR has no @ while use_domain is enabled >>> >>>in my syslog. Could this be the reason??? >>> >>>br hw >>> >>> >>> >>>tir, 22,.08.2006 kl. 15.28 +0300, skrev Bogdan-Andrei Iancu: >>> >>> >>> >>> >>>>Hi Helge, >>>> >>>>it should work. Can you check if any db query is performed by the function? >>>> >>>>regards, >>>>bogdan >>>> >>>>Helge Waastad wrote: >>>> >>>> >>>> >>>> >>>> >>>>>Hi, >>>>>I'm just wondering if the 'registered("location")' works when using >>>>>db only mode for usrloc? >>>>> >>>>>br hw >>>>> >>>>> >>>>>_______________________________________________ >>>>>Users mailing list >>>>>Users(a)openser.org >>>>>http://openser.org/cgi-bin/mailman/listinfo/users >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>

18 years, 5 months

[Users] Please help me for SMS module (SIP to GSM)

by ade darmawan

Please help me mr... i have read this module...but i don't understand with 4 question : 1. I found that in the SMS Module (SIP to GSM) don't explained the software which used by the client/user agent or where we should to do testing in client? 2. I wanna know the other facilities should be used, beside openser-1.0.0.tar.gz,mysql,DNS? 3. For the final result, is this module could send SMS by 2 directions? 4. Could you please the step to do the testing? Thank's for all --------------------------------- Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail.

18 years, 5 months

[Users] Byes not accounted

by Jayesh Nambiar

Hi all, I have got a strange problem with my accounting. This is my scenario: I have a registered user dialling a pstn number. The call is connected and then the registered UA switches off the IP device and there is no BYE from the registered UA. Now the pstn gateway sends a BYE after certain period and Openser tries to send that BYE to the registered UA, but the registered UA is powered off and it never replies. So Openser retransmits the BYE messages and finally generates a 408 response towards the gateway. But Openser does not account that BYE in the acc table. According to me, the Openser should acount that BYE for proper accouning, Please correct me if I am wrong. Also suggest some method so that I can make the unacknowledged BYEs account in the acc table. In my config I have: if(method=="BYE") { setflag(1); }; if(method!="REGISTER") { record_route();}; setflag(1); if(loose_route()) { ..... #the rest logic} an so on. I have flag 1 as db_flag. thanks in advance, w/regards, jayesh. --------------------------------- Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW

18 years, 5 months

[Users] libmysqlclient15-dev Download Fail

by openser＠comcast.net

I am downloading the prerequisite for Openser and one of the items keeps failing me. This the error below. Any help will be appreciated. [root@localhost openser]# yum install libmysqlclient15-dev Setting up Install Process Setting up repositories updates-released 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 base 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files Parsing package install arguments No Match for argument: libmysqlclient15-dev Nothing to do

18 years, 5 months

Re: [Users] rtpproxy or RTPProxy, where to download or checkout

by Klaus Darilion

Bill Zhang wrote: > This could be a simple question but I went through the whole user archive > and yet to find out where to download it or cvs checkout, I do see > mediaproxy as part of OPENSER module, wonder why rtpproxy or RTPProxy is > not:(. Hi Bill! There are 2 RTP proxies available. 1. Mediaproxy 2. rtpproxy To communicate with Mediaproxy, openser uses the mediaproxy module. To communicate with rtpproxy, openser uses the nathelper module. The modules are part of openser, but not the RTP proxies itself. You can download Mediaproxy from ag-projects: http://mediaproxy.ag-projects.com/ You can download rtpproxy from berlios cvs (which is insides ser's CVS repository) http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/rtpproxy/ cvs -d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser login press enter when prompted for a password cvs -z3 -d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser co rtpproxy then do the usual: ./configure; make; make install regards klaus > > Thanks in advance for help. > > Bill > > -----Original Message----- > From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf > Of Atle Samuelsen > Sent: Monday, August 14, 2006 12:56 PM > To: Ever Zalazar > Cc: users(a)openser.org > Subject: Re: [Users] mediaproxy vs. rtpproxy > > > Hi ever, > > I would say this is not a proper question. Both work like a charm with > (Open)SER. > > The question you should ask yourself is what do you want to accomplish > with mediaproxy/rtpproxy. If itÂ´s only calls between nated useragensts, > you can use both without any problem. > > - Atle > * Ever Zalazar <zalazar(a)technologymaker.com> [060814 21:41]: >> Hi people! Just to know, which is much better for openser mediaproxy or > rtpproxy? >> >> Best Regards >> >> >> Ever > >> _______________________________________________ >> Users mailing list >> Users(a)openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

18 years, 5 months

← Newer
1
...
10
11
12
13
14
15
16
...
36
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2006