sr-users February 2006

sr-users@lists.kamailio.org

189 participants
373 discussions

by Guty

> I'm running my SER on a debian 3.1. > I've installed (i think so) all necesary stuff to run SER whit mysql > support and serweb interface. > when I try to acces it, i receive the following message: > > Warning: main(DB.php): failed to open stream: No such file or directory in > /home/gustavo/serweb/html/main_prepend.php on line 38 > > Fatal error: main(): Failed opening required 'DB.php' > (include_path='.:/usr/share/php:/usr/share/pear') in > /home/gustavo/serweb/html/main_prepend.php on line 38 > > > I'll preciate if anyone could help me.... > (as you could see, I'm new to all this stuff... ) > Thank you.....

18 years, 3 months

[Serusers] Presence + XCAP root problem with multiple domains

by Adrian Georgescu

Hello Vaclav, I cannot manage to handle the same username under different domain names using the same XCAP tree. Data location for user1(a)example1.com will conflict with data location for user1(a)example2.com on the filesystem is the same: /xcap-root/pres-rules/users/user1/presence-rules.xml My XCAP server can generate separate trees for each domain and create the XCAP structure under each domain (like /xcap-root/example1/pres-rules/users/ ) but in this case SER should be able to build a dynamic root like: https://xcap.example.com/$domain$/ In Eyebeam I can configure the xcap-root statically but obviously if I do this for multiple domains, SER should be able to build it from information available in the PUBLISH/SUBSCRIBE request so that it can locate the right tree on the XCAP server. Do you see any other solution for this problem? Regards, Adrian

18 years, 3 months

[Serusers] Serweb does not send mail on registration

by Bart J. Smit

I have serweb-0.9.4 installed on CentOS 4.2 with MySQL 4.1.12-3 and ser-0.9.6-1 compiled from the source RPM at http://ftp.upjs.sk/pub/users/sal/Fedora/4/voip. When I register a new user, the PHP script goes to an empty page without title and the email never gets sent to the address entered on the registration form. The database gets the correct user details inserted into the pending table. The sendnotification and greeting fields remain empty. I have modified the line in config_data_layer.php for the collation character set to read: $config->data_sql->collation = "latin1_swedish_ci"; This got rid of a DB error in serweb which I traced through pear logging: Illegal mix of collations (latin1_swedish_ci,IMPLICIT) and (utf8_general_ci,COERCIBLE) for operation '='] I have sent a test email with the debugging/mail.php script and it arrives fine. I have tested the registration page with local recipients, recipients on the LAN and external recipients but the behaviour stays the same. All the pages I have googled on serweb registration problems always state that the emails are sent out correctly, so I'm likely missing something obvious. Can anybody help me get the registration to work? Thanks, Bart...

18 years, 3 months

[Serusers] windows messenger 5.1 and IM

by Yi Zheng

Note: forwarded message attached.

18 years, 3 months

[Serusers] [serweb] Problem with admin privileges, account, accounting, aliases

by mkumar＠mantragroup.com

Hi All, I installed serweb and able to login both as admin and user. But some features are not at all working for me and also I could not see any error message. The following tabs in admin mode are not working account,accounting,aliases in users admin privileges server monitoring after enabling cron jobs The above tabs common to user mode like accounting are also not working. I have mysql version 3.23.58. I am getting these problems only because mysql version is <4.0 or should I update or add anything to my ser.cfg or any other place? Someone please help me. I do not know where I am going wrong or what to do and there are no errors as well. Thanks, Manoj.

18 years, 3 months

[Serusers] SER and Cisco ATA 186

by R2

Hi all, How I can supress of uri user=phone ? This ATA receive call from PSTN, but, when I send calls to PSTN, i don't obtain response. The integration to PSTN is on Asterisk. Thanks R2

18 years, 3 months

[Serusers] Help on SER with Mediaproxy

by Muhammad Asif Ali

Hi All I have a scenario in which I want to deploy SER with mediaproxy & allow everyone/anyone connecting with my SER to talk to each other. I am using ONSIP gettingStarted document. In order to allow everyone to connect to my SER without authentication I commented the following portion in ser.cfg: in Route[2] #if (!www_authorize("","subscriber")) { # www_challenge("","0"); # break; #}; #if (!check_to()) { # sl_send_reply("401", "Unauthorized"); # break; #}; # consume_credentials(); and in Route[3] # if (!proxy_authorize("","subscriber")) { # proxy_challenge("","0"); # break; #} else if (!check_from()) { # sl_send_reply("403", "Use From=ID"); # break; #}; #consume_credentials(); Now when I try to connect 2 UA (Simpleopal) from behind a same NAT, they do get registered, & records also appear in location table of DataBase. But when I place call from UA1 to UA2 like "call sip:UA2@aa.bb.cc.dd", where aa.bb.cc.dd is the public IP of my SER machine (mediaproxy is also running on same machine), it ends up showing transport error. On SER side: A) SER logs say: on lookup() "UA2 not found in usrloc" and on is_local() "Realm 'ab.cc.dd.ee' is not local". the is_lcoal appears again saying "Realm 192.168.0.241 is not local" where 192.168.0.241 is UA2's local IP. B)Mediaproxy log says: command request c78d68c6-fbf4-1810-80b4-0050badb4a03@UA1 203.82.51.9:5000:audio 203.82.51.9 aa.bb.cc.dd remote 192.168.0.241 remote OPAL/2.0 info= from:UA1@aa.bb.cc.dd,to:UA2@aa.bb.cc.dd ,fromtag:b09168c6-fbf4-1810-80b4-0050badb4a03,totag: session c78d68c6-fbf4-1810-80b4-0050badb4a03@UA1: started. listening on aa.bb.cc.dd:35000 command execution time: 9.35 ms command request c78d68c6-fbf4-1810-80b4-0050badb4a03@UA1 203.82.51.9:5000:audio 203.82.51.9 aa.bb.cc.dd remote 192.168.0.241 remote OPAL/2.0 info= from:UA1@aa.bb.cc.dd,to:UA2@aa.bb.cc.dd ,fromtag:b09168c6-fbf4-1810-80b4-0050badb4a03,totag: command execution time: 0.60 ms session c78d68c6-fbf4-1810-80b4-0050badb4a03@UA1: 0/0/0 packets, 0/0/0 bytes (caller/called/relayed) session c78d68c6-fbf4-1810-80b4-0050badb4a03@UA1: ended (did timeout). (203.82.51.9) is my LAN's public IP aa.bb.cc.dd is the public IP of SER machine C) using ngrep I found out that it sends an "SIP/2.0 408 Request Timeout" cant figure out whats going on, anybody having any idea please help. Thanx in advance Regards Muhammad Asif Ali

18 years, 3 months

[Serusers] any info reg adding DTLS using OpenSSL

by Pjothi

Dear all, I am a student and am trying to setup a demonstration with TLS and DTLS support between a SIP client and a Proxy. Has anyone some information regarding adding DTLS support for a SIP client/Proxy or a more generic one using OpenSSL. I just need it for demonstration purposes and so error handling's if any need not be complete. Just a simple support and a demonstration of both would do fine. If anyone has any information regarding this, may be a how to start or any introductory article would be of great help, kindly let me know. This would be of great help. Any suggestions regarding the same are most welcome. kindly let me know and thank you very much. regards, Pjothi

18 years, 3 months

[Serusers] STUN and symmetric nat again

by Istvan De

Hi! I've read about the above topic in the arcives and now I've got the same problem. User A is behind a symmetric NAT -> a new port is bound for every different (external ip, external port) pair. User B has a connection to the net without any NAT or firewall. User A wants to have a SIP+RTP session with user B. How? I guess basically what is needed is forming of a SIP message like "send the your reply to the same ip and same port from where you have received this" and user A can send this to user B. For the RTP session, a pretty similar thing would be needed like, A says to B: "I send you the RTP stream on your x port, send your rtp stream back to the same ip and port from where you receive mine". How to setup such a SIP packet? Or maybe there is a standard solution for this already? (STUN wont help in this case I guess, and TURN is not an option for me.) I've read about "symmetric SIP + symmetric RTP" maybe that is the same as I've described above? Thanks Istvan

18 years, 3 months

[Serusers] adress book

by Joao Pereira

Hello to all Im using X-lite, eyeBeam and Cisco 79XX phones and I would like to know the best way of implement a centralized address book system. Maybe the solution is LDAP, but these clients doesnt seem to support LDAP.Who should contact the LDAP directory? the SIP clients or the SIP server? Thanks Joao Pereira

18 years, 3 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2006