sr-users December 2006

sr-users@lists.kamailio.org

152 participants
257 discussions

by Danilo Vilela Dantas

Hi all, Congratulations! I use Openser. I have got a question. Has it Instant Messaging? It works like IM? Is there any module for P&IM? Thanks! Danilo

17 years, 5 months

[Users] calculating phplib_id

by Bill Neely

Can anybody explain to me how to calculate phplib_id? I have been aboe to calculate ha1 and ha1b, but don't see any instructions on calculating the phplib_id. --

17 years, 5 months

[Users] OpenSER

by Danilo Vilela Dantas

Hi all What is version OpenSER for the module IMC? Can it use in the OpenSER 1.0.1? And when will be ready the version 1.2.0? Delay? When time delay? Danilo

17 years, 5 months

Re: [Serusers] branch parameter

by Tuffy Dhawan

www.adoreinfotech.com is offering a Softphone based on Microsoft RTC/1.2 which is not generating branch parameter while sending INVITE but call is still going through. How is branch parameter used as per RFC 3261. >From: "Pat Wang" <wangyu39(a)hotmail.com> >To: "Kapil Dhawan" <digitaltuffy(a)hotmail.com>,<serusers(a)lists.iptel.org> >Subject: Re: [Serusers] branch parameter >Date: Mon, 18 Dec 2006 00:17:26 -0000 > >branch in Via header is a MUST have parameter by RFC 3261. > >----- Original Message ----- From: "Kapil Dhawan" ><digitaltuffy(a)hotmail.com> >To: <serusers(a)lists.iptel.org> >Sent: Sunday, December 17, 2006 4:05 PM >Subject: [Serusers] branch parameter > > >>Whats the importance of branch parameter. I am using RTC/1.2 library and >>its not generating branch parameter. >> >>_________________________________________________________________ >>Tried the new MSN Messenger? Its cool! Download now. >>http://messenger.msn.com/Download/Default.aspx?mkt=en-in >> >>_______________________________________________ >>Serusers mailing list >>Serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> > _________________________________________________________________ Stay in tune with the latest styles! Check out the happening fashion trends on 'Wardrobe watch'. Only on MSN Lifestyle http://content.msn.co.in/Lifestyle/Moreonlifestyle/LifeStyle_091006_0551.htm

17 years, 5 months

[Serusers] Denial-of_service

by Tuffy Dhawan

How do you prevent Denial-Of-service in case of a stateful Proxy. _________________________________________________________________ Catch all the cricketing action right here. Live score, match reports, photos et al. http://content.msn.co.in/Sports/Cricket/Default.aspx

17 years, 5 months

[Serusers] Request Response Query

by Kapil Dhawan

As per RFC 3261, SIP Trapezoid UAC1 - INVITE - UAS1 UAS1 - INVITE - UAS2 UAS1 - 100 Trying - UAC1 But i tried to check logs in SER which shows UAC1 - INVITE - UAS1 UAS1 - 100 Trying - UAC1 UAS1 - INVITE - UAS2 Why is it different. _________________________________________________________________ Mega Fare sale on domestic airlines. Call 1-800-11-8747 now! http://india.makemytrip.com/?Camp=MSN&attrib=Dec/Tag/Mega

17 years, 5 months

Re: [Users] Duplicate INVITEs - t_lookup_request and t_check_trans

by Mahesh Paolini-Subramanya

quite quite positive. the reason i am so certain is that there is only *one* place in my entire config file that i actually do a t_relay() (or equivalent). I isolated all the code into route[1], to ease maintainability of my (admittedly complex) config file. In route[1], the relevant section is pretty damn close to if (!t_relay()) { if (!is_method("ACK")) { sl_reply_error(); } } fwiw, its 1.1.0 (latest cvs version thereof) cheers ----- Original Message ----- From: Bogdan-Andrei Iancu < bogdan(a)voice-system.ro > To: mahesh(a)aptela.com Cc: Klaus Darilion < klaus.mailinglists(a)pernau.at >, users < users(a)openser.org > Sent: Thursday, December 14, 2006 12:39:04 PM GMT-0600 Subject: Re: [Users] Duplicate INVITEs - t_lookup_request and t_check_trans Hi Mahesh, I do not think you need t_check_tran() as t_relay() automatically absorbs the retransmissions. are you sure you are not calling t_relay() twice for the same requests? or calling a tm function (t_newtran) before the t_relay ?? regards, bogdan Mahesh Paolini-Subramanya wrote: >Well, i read the documentation again, and found t_lookup_request, and t_check_trans. >Question 1 - t_lookup_request() creates the transaction if it doesn't exist, correct? However, t_check_trans only checks to see if the transaction already exists, correct? > >Question 2 - Assuming that t_check_trans only checks to see if the transaction already exists, then is the following correct? > >Currently I do the following (after stripping out a bunch of stuff) > >if (!t_relay()) { > if (!is_method("ACK")) { > sl_reply_error(); > } >} > >should this, instead, actually look like the following? >if (is_method("INVITE")) { > if (if !t_check_tran()) { > t_relay(); > } >} else if (!is_method("ACK")) { > sl_reply_error(); >} > > > >----- Original Message ----- >From: Klaus Darilion < klaus.mailinglists(a)pernau.at > >To: mahesh(a)aptela.com >Cc: users < users(a)openser.org > >Sent: Thursday, December 14, 2006 2:06:01 AM GMT-0600 >Subject: Re: [Users] Duplicate INVITEs > >Mahesh Paolini-Subramanya wrote: > > >>We're seeing sporadic situations where fones >>a) send an INVITE >>b) ignore the 100-Trying response, and instead >>c) send another INVITE with the same sequence number. >> >>The question is, What should happen here? >> >> > >If the message is completely identical then it is a retransmission. >Retransmissions should be detected by tm module (e.g. t_relay()) and >absorbed, > >regards >klaus > > > > >>Currently, we send back a 500 response (server error). >>Is this correct? (i think not, cause it invariably causes the fone to go fast busy). >>Is this some other response that should occur? >> >>poring over 3261 resulted in a headache, and no additional clarity... >> >> >> >> >> >> >> >>------------------------------------------------------------------------ >> >>_______________________________________________ >>Users mailing list >> Users(a)openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users >> >> > > > > -- ******************************************* Mahesh Paolini-Subramanya (703) 386-1500 x9100 CTO mahesh(a)aptela.com Aptela, Inc. http://www.aptela.com "Aptela: How Business Answers The Call" ******************************************* -- ******************************************* Mahesh Paolini-Subramanya (703) 386-1500 x9100 CTO mahesh(a)aptela.com Aptela, Inc. http://www.aptela.com "Aptela: How Business Answers The Call" *******************************************

17 years, 5 months

Re: usrloc loading (was Re: [Serusers] Re: Fw: [Users] TM : retransmission timers

by Jiri Kuthan

Thanks, how could I have missed that! Is what it does it loads usrloc table piece-wise? And if so, why does it do only for mysql? And also, it is saying that old version would have increased memory consumption with TCP/TLS -- does it mean that it does not increase with the new version? -jiri At 14:32 30/11/2006, Ovidiu Sas wrote: >Maybe you are looking for this one: >http://www.openser.org/index.php?option=com_content&task=view&id=48&Itemid=9 > > >Regards, >Ovidiu Sas > >On 11/30/06, Jiri Kuthan <jiri(a)iptel.org> wrote: >>At 12:53 22/11/2006, Weiter Leiter wrote: >>>I know that OpenSER loads (only?) faster. >> >>Can folks share with me what the fast-usrloc-loading feature is about? >>I was not successful finding it out. >> >>Thanks! >> >>-jiri >> >> >>-- >>Jiri Kuthan http://iptel.org/~jiri/ >> >> >>_______________________________________________ >>Users mailing list >>Users(a)openser.org >>http://openser.org/cgi-bin/mailman/listinfo/users > >-- >Jiri Kuthan http://iptel.org/~jiri/

17 years, 5 months

[Users] determining if From==To

by Mark Price

Hi, How would one determine if the From address equals the To address, or even better, if the To address is either the same as or an alias of the From address? Thanks Mark Price

17 years, 5 months

RES: [Users] OpenSER

by Danilo Vilela Dantas

List of contacts and instant message. ________________________________ De: Adrian Georgescu [mailto:ag@ag-projects.com] Enviada em: sexta-feira, 15 de dezembro de 2006 17:16 Para: Danilo Vilela Dantas Cc: users(a)openser.org Assunto: Re: [Users] OpenSER Hi Danilo, Could you please tell us what features from 1.2.0 do you need so badly? Adrian On Dec 15, 2006, at 8:05 PM, Danilo Vilela Dantas wrote: Hi all What is version OpenSER for the module IMC? Can it use in the OpenSER 1.0.1? And when will be ready the version 1.2.0? Delay? When time delay? Danilo _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

17 years, 5 months

← Newer
1
...
8
9
10
11
12
13
14
...
26
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2006