sr-users October 2006

sr-users@lists.kamailio.org

189 participants
345 discussions

by Olle E Johansson

I got a bug report in our bug report tracker for Asterisk that claims that SER changes the call ID by adding a :port after the IP address. From reading the RFC, I don't think it's a valid change. For me, it's a new call ID. Questions: - Is changing a Call ID permitted within a dialog? - Does SER/OpenSER actually do this? http://bugs.digium.com/view.php?id=8220 See you at the Summit in Berlin! regards, /Olle

17 years, 6 months

[Users] Cvs snapshot Invalid table version

by Pletli Antal

Hi, How can I fix the "version" table to work with openser cvs snapshot? I have problem with grp,silo and location tables. I have installed the DB from the cvs too. +-----------------+---------------+ | table_name | table_version | +-----------------+---------------+ | subscriber | 5 | | missed_calls | 3 | | location | 1003 | | aliases | 1003 | | grp | 2 | | re_grp | 1 | | acc | 3 | | silo | 5 | | domain | 1 | | uri | 1 | | trusted | 3 | | usr_preferences | 2 | | speed_dial | 2 | | dbaliases | 1 | | gw | 3 | | gw_grp | 1 | | lcr | 2 | | sip_trace | 1 | | address | 2 | | domainpolicy | 2 | | presentity | 1 | | presence | 1 | +-----------------+---------------+ Antal

17 years, 6 months

[Users] Registration of Polycom SoundPointIP phone with OpenSER

by jeevan ravula

Hi all, I am using Polycom SoundPointIP phone as User Agent.I want to register Polycom phone with OpenSER(with TLS support) server.Can anybody help me out in this regard? I have generated my rootCA and given to polycom phone.The polycom phone does not accept certificate from openser server side.It shows bad certificate. anybody who has used polycom phone earlier can help me out in this matter.Ishall be greatful to them Regards, Jeevan.

17 years, 6 months

Re: [Serusers] Re: How to change Caller ID in FROM field ?

by lawrence k.y. lin

Hi there, This is an update for the Caller ID with Telco Carrier. The reason that Caller ID did not work on Verizon's mobile phone is because I only change the Display Name in the From Field. After I changed the From-URI (the field after the Displan Name which is <sip: XXXXXXXXXX@ip>), then Caller ID is displayed on Verizons mobile phone without any problem. Thanks for all that replied to this question. Best Regards, Larry >lawrence k.y. lin wrote: >Steve, > > Thanks for your email and your solutions. > > I tried the first method as follws: > >replace ("^From:(.*)<", "From: \"XXXXXXXXXX\" <") > > before I sent it to another SIP device and PSTN gateway. I did see the >new Caller ID XXXXXXXXXX in another SIP device but the Caller ID to Verison >Mobile phone showed "Unavailable No". I will check with Telco carrier to >see if we did send the Caller ID to them or not. > Also I will try your second method and update to the list later. > > Thanks again. > >Larry > >>From: Steve Blair <blairs(a)isc.upenn.edu> >>To: "lawrence k.y. lin" <lawlin888(a)hotmail.com> >>CC: serusers(a)lists.iptel.org >>Subject: Re: [Serusers] Re: How to change Caller ID in FROM field ? >>Date: Tue, 24 Oct 2006 18:57:42 -0400 >> >> >>You can do this several ways. I use to just completely replace the From >>header but this screwed up call accounting (for callers with caller ID >>blocking enabled) which we do in our Cisco gateways. Now I append an >>Remote-Party-ID header leaving the Fromheader intact for accounting >>purposes. Try one of the following: >> >>1) replace("^From:(.*)>" , "From: \"Anonymous\" >><sip:anonymous@invalid.nowhere>"); >> >> Where the second string contains whatever you want the caller ID info >>to be. This example is for caller ID blocking. >> >>2) >> >>if (append_rpid_hf("Anonymous >><sip:","@upenn.edu>;party=calling;id-type=subscriber;screen=yes")) { >>} else { >> log(1, "RPID not found\n"); >>}; >> >>Of course this requires other configuration items. You may also want to >>add the following: >> >>modparam("auth", "rpid_prefix", "<sip:") >>modparam("auth", "rpid_suffix", >>"@upenn.edu;user=phone>;party=calling;screen=no;id-type=subscriber;privacy=off") >> >># >> >>-Steve >> >>lawrence k.y. lin wrote: >> >>>Hi all, >>> >>> Appreciate if someone can give me a suggestion or even an answer. >>> Since the call from SIP device to PSTN phone did not have Caller ID >>>and our Telco carriers request for the Caller ID, we have to set a number >>>before the calls are routed to PSTN gateway. >>> I did it in Asterisk before with the function calls SetCallerID(CLID) >>>or Set(CALLERID(number)=CLID) (depends on the Asterisk version) and these >>>function calls worked. But because of the scalabliity issue, I changed to >>>SER and would like to do the similar thing as in Asterisk. >>> I read the SER document and awared SIP_HF_FROM has the data for the >>>entired FROM field. Is there any other variables for Caller ID only ? >>> I searched the mailing list for SER and did not find any related >>>topic (only found one with title: caller-id with raius using sip-rpid, >>>but it is irrelevant). >>> >>> Thanks in advance. >>> >>>Larry _________________________________________________________________ Try the next generation of search with Windows Live Search today! http://imagine-windowslive.com/minisites/searchlaunch/?locale=en-us&source=…

17 years, 6 months

[Users] Re: Conference is Not Working.... with OpenSER And, Asterisk

by Paul Smith

This is an Asterisk config problem rather than an OpenSer one. The conference applications in Asterisk need a timing source. If you install a Digium or Sangoma card then Asterisk will use it as a timing source. As you are not using such a card you need to compile and modprobe a module called ztdummy to create a pseudo timing device.

17 years, 6 months

[Serusers] How do I allow gateway on ser to not ask for any authentication

by Lokesh Kumar

Hello , How do I configure my ser and radius so that it won’t ask for credentials from PSTN gateway, Please help Thanks very much Lokesh -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.408 / Virus Database: 268.13.11/496 - Release Date: 10/24/2006

17 years, 6 months

[Serusers] Re: Asterisk Manager

by Maps

Dear Friends and Supporters! I try to write a php application to monitor the asterisk, but when I open the .php to access to asterisk to retrieve the information about the queues status, sip show peers, realtime mysql status etc... However, It just return to me "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)" Asterisk is current running with the a file in /var/run/asterisk.ctl for the user asterisk. I have set asterisk to be the owner of the folder /var/run, and start asterisk with user is asterisk. HTTPD is run under asterisk user. My manager.conf has an entry. [admin] secret = password deny=0.0.0.0/0.0.0.0 permit=127.0.0.1/255.255.255.0 read = system,call,log,verbose,command,agent,user write = system,call,log,verbose,command,agent,user However, my php still unable to retrieve the information for asterisk. Did I miss somethings? Your help would be very appreciated! Regards, Lan

17 years, 6 months

[Serusers] MySQL has gone away

by Mark Price

Hi, I'm getting the MySQL has gone away error. I have set the following in ser.cfg: modparam("mysql", "auto_reconnect", 1) modparam("mysql", "ping_interval", 60) Restart fixes this, but that is of course not sufficient. I suppose I can detect every time that error happens with swatch or some such thing and restart the service. This seems to be a common error. Is there a common solution? Mark

17 years, 6 months

[Serusers] MySQL confusion

by Chris Parkinson

Hello, I'm a complete newbie to SER and I'm having a problem following the MySQL section of the "getting started" guide. Whenever I try to use serctl to add a user I get access denied; LabServ1:/home/chris# export SIP_DOMAIN=mylab.com LabServ1:/home/chris# serctl add test1 test1pass test1(a)mylab.com MySql password: ERROR 1045: Access denied for user: 'serro@localhost' (Using password: YES) error: SER/FIFO not accessible: 2 LabServ1:/home/chris# I think this may be down to the MySQL install. I've installed MySQL and tested it, however I can't find any documentation anywhere to show me what users, tables and databases to setup for SER. I'm using SER on Debian. It's quite possible I'm missing something obvious. I'd appreciate a pointer in the right direction. Chris

17 years, 6 months

[Users] X-lite is not Working, But SipEyeMedia Softphones is Working Fine.

by sunkara

Hello Users, I don't Know What Happening in this Issues... Help me in this . When Testing the X-lite Softphones, is not working. When I use the Sip EyeMedia Softphone it Working Fine. Is Problem in X-lite Configuration or Router(Firewall Gateway Keepers ) is blocking it... Help me . -- Thanks & Regards, *Ravi Prakash Sunkara* *M*:+91 9985077535* O*:+91 40 23114549* F*:+91 40 40208727 /*ravi.sunkara(a)hyperion-tech.com www.hyperion-tech.com */

17 years, 6 months

← Newer
1
...
5
6
7
8
9
10
11
...
35
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2006