sr-users October 2006

sr-users@lists.kamailio.org

189 participants
345 discussions

[Serusers] reinvite accounting
by olivier.taylor 23 Oct '06

23 Oct '06

hi all, Using Ser 0.9.6 and asterisk(s) as pstn gateways. Asterisks are used for the Billing on the pstn. For sip --> sip calls, no billing, just accounting of the normal and missed calls. The problem is REINVITEs, ACC module record all the Invites and ACK, even when it's a Reinvite (has_totag). I use the flags for telling Ser what to account, I never set the flags for Reinvites, not even reset the flags. Is ther a simple way to avoid recording of Reinvites in the ACC table? Thanks, Olivier

1 0

[Serusers] Re: pa module: presence "substatus"
by Vaclav Kubart 23 Oct '06

23 Oct '06

Hi, you have to set LD_LIBRARY_PATH variable before running ser (see "3.4 Running SER" in presence handbook): export LD_LIBRARY_PATH=/base/ser/directory/lib/ser /base/ser/directory/sbin/ser -f /base/ser/directory/etc/ser/ser.cfg Vaclav On Fri, Oct 20, 2006 at 07:06:54PM +0200, Diego Do?ate wrote: > > Hi, > > I have done followed these steps, but still the same errors. Should I > unistall something else? > ... > 0(13168) qm_malloc(0x8113ea0, 24) returns address 0x8148710 frag. 0x81486f8 > (size=24) on 1 -th hit > 0(13168) read 2739142786 from /dev/urandom > 0(13168) seeding PRNG with 3900519771 > 0(13168) test random number 509866974 > 0(13168) ERROR: load_module: could not open module > </usr/local//lib/ser/modules/dialog.so>: lib_ser_cds.so: cannot open shared > obj ect file: No such file or directory > 0(13168) parse error (36,13-14): failed to load module > 0(13168) ERROR: load_module: could not open module > </usr/local//lib/ser/modules/rls.so>: lib_ser_xcap.so: cannot open shared > objec t file: No such file or directory > 0(13168) parse error (37,13-14): failed to load module > 0(13168) ERROR: load_module: could not open module > </usr/local//lib/ser/modules/pa.so>: lib_ser_xcap.so: cannot open shared > object file: No such file or directory > 0(13168) parse error (38,13-14): failed to load module > 0(13168) ERROR: load_module: could not open module > </usr/local//lib/ser/modules/presence_b2b.so>: lib_ser_xcap.so: cannot open > sha red object file: No such file or directory > 0(13168) parse error (39,13-14): failed to load module > 0(13168) set_mod_param_regex: No module matching <rls> found > 0(13168) parse error (76,21-22): Can't set module parameter > 0(13168) set_mod_param_regex: No module matching <rls> found > 0 > .... > > > Diego > > -----Mensaje original----- > De: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Enviado el: viernes, 20 de octubre de 2006 7:15 > Para: Diego Do?ate > CC: serdev-bounces(a)lists.iptel.org > Asunto: Re: pa module: presence "substatus" > > Hi, > this seems that you are compiling something else than "presence snapshot" > because "presence snapshot" has modified Makefiles to compile libraries > automaticaly which was not done in your case. > > Try to follow the compilation rules "3.2 Installation from CVS": > > cd sip_router/lib > make -f Makefile.ser install prefix=/base/ser/directory cd .. > make install include_modules="dialog pa rls presence_b2b xcap mysql xmlrpc" > prefix=/base/ser/directory > > [in your case will be prefix=/usr/local if you want to install ser there] > > Vaclav > > On Thu, Oct 19, 2006 at 07:57:55PM +0200, Diego Do?ate wrote: > > > > Hi, > > > > Thanks for the suggestion. I have download the 0.10.99 version > > ("presence > > snapshot") but I can not make it work: after the "make install", I go > > to /usr/local/etc/ser, where is the ser.cfg to run, but with ser -f > > ser.cfg it gives me this errors: > > > > ERROR: bad config file (47 errors) > > -bash-3.00# ser -f ser.cfg -E > > 0(15125) ERROR: load_module: could not open module > > </usr/local/lib/ser/modules/dialog.so>: lib_ser_cds.so: cannot open > > shared object file: No such file or directory > > 0(15125) parse error (36,13-14): failed to load module > > 0(15125) ERROR: load_module: could not open module > > </usr/local/lib/ser/modules/rls.so>: lib_ser_xcap.so: cannot open > > shared object file: No such file or directory > > 0(15125) parse error (37,13-14): failed to load module > > 0(15125) ERROR: load_module: could not open module > > </usr/local/lib/ser/modules/pa.so>: lib_ser_xcap.so: cannot open > > shared object file: No such file or directory > > 0(15125) parse error (38,13-14): failed to load module > > 0(15125) ERROR: load_module: could not open module > > </usr/local/lib/ser/modules/presence_b2b.so>: lib_ser_xcap.so: cannot > > open shared object file: No such file or directory > > 0(15125) parse error (39,13-14): failed to load module > > 0(15125) set_mod_param_regex: No module matching <rls> found > > > > > > And the last line is repeated with the 4 modules it can not find. But > > the 4 of them exists in /usr/local/lib/ser/modules, where it is looking > for... > > > > I thought the installation was going to be easy, as read in > > http://ftp.iptel.org/pub/ser/presence/presence-handbook/ar01s03.html (3.3. > > Installation from presence-snapshot), but there is something I am > > doing wrong. > > > > Any suggestion? I attach the .cfg > > > > Thanks a lot > > > > Diego Do?ate > > > > > > -----Mensaje original----- > > De: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Enviado el: > > miércoles, 18 de octubre de 2006 11:22 > > Para: Diego Do?ate > > CC: serdev-bounces(a)lists.iptel.org > > Asunto: Re: pa module: presence "substatus" > > > > Hi, > > I'm afraid that there was not good support for presence in 0.9.6. I > > recommend to use "presence snapshot". > > Vaclav > > > > On Wed, Oct 18, 2006 at 10:37:27AM +0200, Diego Do?ate wrote: > > > > > > Hi, > > > > > > I am using the last version of the SER server (0.9.6), and have > > > a problem with the presence management. I want a user (805) to > > > subscribe to the presence of another user (806), but when 805 sends > > > a SUBSCRIBE to the SER, it responses a NOTIFY with "closed-offline", > > > while both users had sent previously a successful REGISTER to the SER. > > > > > > Both users are added (serctl) to the server, and are displayed > > > in "subscriber" table of the "ser" DB. Once registered, they are > > > also in the "location" table. But the ser does not add "open" to the > > > NOTIFY.. Any > > idea? > > > > > > Once the user 805 is successfully subscribed to the presence of > > > user 806, when 806 modifies its presence (sends a PUBLISH to the > > > SER, with > > "open" > > > and <note>"Away"</note> in the xml, for instance), the SER is > > > suppposed to send a NOTIFY with the same xml to user 805 > > > (subscriber), > > isn't it? > > > > > > "pa" module is added, but in this moment I don't need > > > authentication. U can see the ser.cfg file bellow: > > > > > > Thanks in advance > > > > > > > > > // ******************************** > > > # > > > # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # > > > simple quick-start config script # > > > > > > # ----------- global configuration parameters > > > ------------------------ > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > #fork=yes > > > #log_stderror=no # (cmd line: -E) > > > > > > /* Uncomment these lines to enter debugging mode fork=no > > > log_stderror=yes */ > > > > > > check_via=no # (cmd. line: -v) > > > dns=no # (cmd. line: -r) > > > rev_dns=no # (cmd. line: -R) > > > #port=5060 > > > #children=4 > > > fifo="/tmp/ser_fifo" > > > > > > # ------------------ module loading > > > ---------------------------------- > > > > > > # Uncomment this if you want to use SQL database loadmodule > > > "/usr/local/lib/ser/modules/mysql.so" > > > > > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > > loadmodule "/usr/local/lib/ser/modules/textops.so" > > > > > > loadmodule "/usr/local/lib/ser/modules/pa.so" > > > > > > # Uncomment this if you want digest authentication # mysql.so must > > > be loaded ! > > > #loadmodule "/usr/local/lib/ser/modules/auth.so" > > > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > > > > # ----------------- setting module-specific parameters > > > --------------- > > > > > > # -- usrloc params -- > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > # Uncomment this if you want to use SQL database # for persistent > > > storage and comment the previous line modparam("usrloc", "db_mode", > > > 2) > > > modparam("pa","db_url","mysql://ser:heslo@localhost/ser") > > > > > > # -- auth params -- > > > # Uncomment if you are using auth module # #modparam("auth_db", > > > "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to > > > yes (which true in this config), # uncomment also the following > > > parameter) # #modparam("auth_db", "password_column", "password") > > > > > > # -- rr params -- > > > # add value to ;lr param to make some broken UAs happy > > > #modparam("rr", "enable_full_lr", 1) > > > > > > # ------------------------- request routing logic > > > ------------------- > > > > > > # main routing logic > > > > > > route{ > > > > > > # initial sanity checks -- messages with > > > # max_forwards==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > break; > > > }; > > > if (msg:len >= 2048 ) { > > > sl_send_reply("513", "Message too big"); > > > break; > > > }; > > > > > > > > > # we record-route all messages -- to make sure that > > > # subsequent messages will go through our proxy; that's > > > # particularly good if upstream and downstream entities > > > # use different transport protocol > > > if (!method=="REGISTER") record_route(); > > > > > > # subsequent messages withing a dialog should take the > > > # path determined by record-routing > > > if (loose_route()) { > > > # mark routing logic in request > > > append_hf("P-hint: rr-enforced\r\n"); > > > route(1); > > > break; > > > }; > > > > > > if (!uri==myself) { > > > # mark routing logic in request > > > append_hf("P-hint: outbound\r\n"); > > > route(1); > > > break; > > > }; > > > > > > # if the request is for other domain use UsrLoc > > > # (in case, it does not work, use the following command > > > # with proper names and addresses in it) > > > if (uri==myself) { > > > > > > if (method=="PUBLISH"){ > > > if(t_newtran()){ > > > handle_publish("registrar"); > > > break; > > > } > > > } > > > if (method=="SUBSCRIBE") { > > > if (!t_newtran()) { > > > log(1, "newtran error\n"); > > > sl_reply_error(); > > > }; > > > handle_subscription("registrar"); > > > break; > > > }; > > > > > > if (method=="REGISTER") { > > > > > > # Uncomment this if you want to use digest authentication > > > # if (!www_authorize("192.168.1.118", "subscriber")) { > > > # www_challenge("192.168.1.118", "0"); > > > # break; > > > # }; > > > > > > save("location"); > > > break; > > > }; > > > > > > lookup("aliases"); > > > if (!uri==myself) { > > > append_hf("P-hint: outbound alias\r\n"); > > > route(1); > > > break; > > > }; > > > > > > # native SIP destinations are handled using our USRLOC DB > > > if (!lookup("location")) { > > > sl_send_reply("404", "Not Found"); > > > break; > > > }; > > > }; > > > append_hf("P-hint: usrloc applied\r\n"); > > > route(1); > > > } > > > > > > route[1] > > > { > > > # send it out now; use stateful forwarding as it works reliably > > > # even for UDP2TCP > > > if (!t_relay()) { > > > sl_reply_error(); > > > }; > > > } > > > > > > > > > > > > > > > > > > // ******************************** > > > > > > -----Mensaje original----- > > > De: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Enviado el: > > > miércoles, 18 de octubre de 2006 6:21 > > > Para: Diego Do?ate > > > CC: serusers(a)iptel.org > > > Asunto: Re: [Serdev] pa module: presence "substatus" > > > > > > Hi, > > > notes are quite often used for this. > > > > > > Can you send your config here? What SER version do you use? And if > > > you try register your users via sending REGISTER messages it is > > > still the > > same? > > > > > > Vaclav > > > > > > P.S. Send these messages to serusers too, might be that somebody > > > else will have the same problem... > > > > > > On Tue, Oct 17, 2006 at 05:18:55PM +0200, Diego Do?ate wrote: > > > > > > > > Hi, > > > > > > > > Thanks, then I will use a <note> tag for the presence > > > > substatus(<note>Away<\note>, for instance). > > > > > > > > I have a problem with the Subscription. User A subscribes to > > > > the presence of user B and receives a NOTIFY but with > > > > "close/offline", and both users are previously registered successfully > in SER. > > > > > > > > Both users are added with serctl, but it seems the SER does not > > "save" > > > > user A registration when user B subscribes... Where may be the > > > > problem? May it be related to autherization? By now, it is disabled... > > > > > > > > Thanks in advance > > > > > > > > > > > > > > > > -----Mensaje original----- > > > > De: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Enviado el: > > > > lunes, > > > > 16 de octubre de 2006 18:57 > > > > Para: Diego Do?ate > > > > CC: serdev(a)lists.iptel.org > > > > Asunto: Re: [Serdev] pa module: presence "substatus" > > > > > > > > Hi, > > > > support for PIDF extensions (elements from non-pidf namespace) is > > > > nearly finished in current CVS version, but it still needs some work. > > > > It will be done as soon as possible. > > > > > > > > Notes should be possible in last presence snapshot without any > > > > problems > > > > - they can be within tuple or presence elements according > specification. > > > > > > > > Vaclav > > > > > > > > On Mon, Oct 16, 2006 at 05:52:47PM +0200, Diego Do?ate wrote: > > > > > > > > > > Hi, > > > > > > > > > > In the SER "pa" module, I would like to use a tag like "note" > > > > > or "substatus" in the pidf of the NOTIFY when a PUBLISH is > > > > > received (with a presence change, to "Away", for instance), but > > > > > SER only modified the <status> tag ("open"/"closed"). > > > > > > > > > > How can I implement a more detailed presence status > > > > > management in the SER? > > > > > > > > > > Thanks in advance > > > > > > > > > > > > > > > _______________________________________________ > > > > > Serdev mailing list > > > > > Serdev(a)lists.iptel.org > > > > > http://lists.iptel.org/mailman/listinfo/serdev > > > > > > > > > >

1 0

[Serusers] Windows Messenger 5.0 error. Please help!!
by Meidiana Ten 23 Oct '06

23 Oct '06

Hi all, I'm using Windows Messenger 5.0 as SIP communication to send IM between clients. It has successfully log into SER server I've built. But when another client log in, the icon on messenger doesn't change to online.I try to send IM but It failed, but when I call using x-lite, it works. What's the problem. Please help!! Regards, Meidiana --------------------------------- All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.

4 3

[Serusers] Presence Server Question
by Dave 22 Oct '06

22 Oct '06

Hello, I have two SER servers - One acting as a proxy (0.9.6) and the second as a presence (0.10). I am forwarding SUBSCRIBE, MESSAGE, PUBLISH requests from proxy to Presnece server. How can I make the presence server know of "who is online"? Do I need the presence server to point to the "location" table of the Proxy Server or do I need to forward REGISTERS from proxy to Presence server?? Any help will be much appreciated __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Users] TLS: has TLS made communication secure? Please help...
by Ferianto siregar 21 Oct '06

21 Oct '06

Dear all, Thank you very much for this chance. Thank you very much for your time to read my problem. Thanks All, I still get some doubts in understanding TLS because untill now, my lecturer still want me to evidence that the communication with TLS support is secure eventhough I have told him that the securing communication in TLS is in the encyption method. But, He still does not believe me. In his opinion, He said that I have to evidence it by eavesdropping the communication, so I can show the difference between communication with TLS and the communication without TLS. Of course, I am confused because as I know frOm the mailinglist and TLS tutorial, it is not necessary to proof because the security is in encryption in TLS. Does anybody can help me to solve my problem? Here are some question that I have to ask to you. Maybe the answer that I got from these questions, can I use to evidence the secure communication in TLS. Please help me..Please 1. Would anybody mind give me or show me the statement which tell the communication in TLS is secure? 2. Would anybody mind give me or show me how the call flow in TLS support? (I mean the flow of encrypt call by using TLS) 3. In voIP communication, from where the sniffer can eavesdrop the communication untill TLS is built to protect communication? and by using TLS, is this hole closed ?(so the communication becomes secure?) Those are the questions. I do hope anybody can give me an answer so I can show it to my lecturer to proof that the TLS communication is secure. Please give me a suggestion. Please.. Thank you very much :) Regards, Ferianto --------------------------------- Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.

3 3

[Serusers] ser new_connection: Access denied for user
by vijay tiwari 21 Oct '06

21 Oct '06

hi problem command ser [root@bishthost sbin]# ser 0(3448) WARNING: fix_socket_list: could not rev. resolve 192.168.5.93 0(3448) WARNING: fix_socket_list: could not rev. resolve 192.168.5.93 Listening on udp: 192.168.5.93 [192.168.5.93]:5060 tcp: 192.168.5.93 [192.168.5.93]:5060 Aliases: stateless - initializing [root@bishthost sbin]# 0(0) Maxfwd module- initializing 0(0) new_connection(): Access denied for user 'root'@'192.168.5.93' (using pass word: YES) 0(0) db_init(): Could not create a connection 0(0) ERROR: uridb_db_ver: unable to open database connection 0(0) ERROR: uri_db:mod_init(): Error while querying table version 0(0) init_mod(): Error while initializing module uri_db ERROR: error while initializing modules when i am login to mysql by this command it working mysql -u root -p password : ************ mysql > mysql > please help in this i am sending my ser.cfg if any change in ser.cfg please let me know thanks vijay --------------------------------- How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.

1 0

[Serusers] voice_silo table missing. Please help!!
by Meidiana Ten 21 Oct '06

21 Oct '06

Hi there, I've read your post in mailing list about voice_silo table. I setup my SER 0.9.7 and I am trying to activate msilo module to store voice message for offline user. I've checked the SER database and found that there is no table named voice_silo. Please help me with the table description so I can create the table. And please tell me how voicemail is store? ( I mean if it is store directly into voice_silo table using x-lite or we must use other application to input voice then store it into any folder). I really need detail because I'm newbie in Linux. Thanx Meidiana --------------------------------- Do you Yahoo!? Get on board. You're invited to try the new Yahoo! Mail.

2 2

[Serusers] Unable to include prolog.html and separator.html
by lin9k＠yahoo.com 20 Oct '06

20 Oct '06

Hi, When I conntect to the serweb the web page shows the warning as below. I am certain the two files prolog.html and separator are in the correct directory and the permission of them and parent directories are correct. Any hints are welcome. Thanks in advance. Warning: virtual() [function.virtual]: Unable to include '/var/serweb/domains/_default/prolog.html' - request execution failed in /var/serweb/html/page.php on line 79 192.168.0.200 user management Warning: virtual() [function.virtual]: Unable to include '/var/serweb/domains/_default/separator.html' - request execution failed in /var/serweb/html/page.php on line 81 Ling __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Serusers] serweb log in failed: Can't parse username and domain part
by lin9k＠yahoo.com 20 Oct '06

20 Oct '06

Hi, Any body know why I get the error message from /var/log/serweb? serweb [info] User login: authentication failed: unsuported format of username. Can't parse username and domain part. I'm using: mysql 3.23.54 serweb-0.9.4 ser 9.9.6 httpd-2.2.3 php-5.1.6 Thanks in advance, Ling __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Serusers] Routing script
by Girish Nayak 20 Oct '06

20 Oct '06

I need to rewrite the URI based on the @from field and then route the call to another proxy. How to do it with routing scripts? Is there any documentation available on the routing scripts? Girish

1 0

← Newer
1
...
8
9
10
11
12
13
14
...
35
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2006