sr-users October 2006

sr-users@lists.kamailio.org

189 participants
346 discussions

[Users] Re: openser
by samuel 31 Oct '06

31 Oct '06

First of all: It's not considered polite to send direct mails for topics which ought to be directed to the mailing list... Try to go to www.onsip.org and download the getting started document, which has a good explanation and several examples for configuring. It is targeted to SER but your openser version should be really close to the config files explained in the getting started document...You might have to adapt some syntax so you would have to check the logs when you start openser. Samuel. 2006/10/31, simo med <simoelmar(a)gmail.com>: > hi Samuel! > i'm asking for an example type of an openser.cfg! if you have any > information or a solution to make my openser work properly, please send it > to me! > i use openser 1.0.1, in linux debian! > thanks in advance > simo

1 0

[Serusers] No query limit ?
by inge 31 Oct '06

31 Oct '06

Hi all, I find a way to show all result for accounting page. I don't want to split it in some pages. So I find in "method.get_acc_entries" the parameter. I write false instead of true. Then I see all entries for the query, but there is always the split in some pages. So for each pages I have all result (lol). Someone have an idea ? Regards.

1 0

[Serusers] SER with a Gateway
by inge 31 Oct '06

31 Oct '06

Hi all, We use SER with a PSTN gateway. My problem is : Although I see my caller ID in result of "show isdn history", my interco provider says that he must put the principal number by default because we don't put the good signalisation for ETSI PRI with the caller ID. That's why on the calling phone, it's not the caller id wich is show on. Someone have an idea ? Is it a problem from SER or Gateway according to you ? (I try to contact Cisco support for this problem too). Regards

1 0

[Serusers] Core dump Presence snapshot 0.10.99-dev35-pa-4.1
by Dave 31 Oct '06

31 Oct '06

The version 0.10.99 of presence snapshot core dumps on a regular basis after running for a certain time. Doing a gdb shows that the core dump occurs at msg_queue_destroy: #0 0x001b87f2 in msg_queue_destroy (q=0xb6293e98) at /usr/local/src/ser-0.10.99-dev35-pa-4.1/lib/../fastlock.h:147 147 asm volatile( Doing a backtrace shows: (gdb) backtrace #0 0x001b87f2 in msg_queue_destroy (q=0xb6293e98) at /usr/local/src/ser-0.10.99-dev35-pa-4.1/lib/../fastlock.h:147 #1 0x008e0a52 in free_presentity (_p=0xb6293e58) at presentity.c:409 #2 0x008e0b0e in release_presentity (_p=0xb6293e58) at presentity.c:354 #3 0x008de196 in timer_pdomain (_d=0xb626ab78) at pdomain.c:156 #4 0x008d7eb0 in timer_all_pdomains () at dlist.c:234 #5 0x008dd4e7 in timer (ticks=83700431, param=0x0) at pa_mod.c:449 #6 0x080928f1 in compat_old_handler (ti=1339206901, tl=0xb6202738, data=0x1) at timer.c:916 #7 0x08092b6e in slow_timer_main () at timer.c:1026 #8 0x0805e7b5 in main_loop () at main.c:1035 #9 0x0805fda2 in main (argc=1, argv=0xbff59804) at main.c:1627 Any clues wil be appricated.

2 1

[Serusers] serctl domain show ERROR
by lin9k＠yahoo.com 31 Oct '06

31 Oct '06

Hi, When I tried to execute "serctl domain show" but it complained "500 command domain_dump not available". What did I do wrong? Thanks in advance, Ling ____________________________________________________________________________________ Access over 1 million songs - Yahoo! Music Unlimited (http://music.yahoo.com/unlimited)

2 2

[Users] parse_via, bad via?
by Dominik Bay 30 Oct '06

30 Oct '06

Hi, i'm getting sometimes this message: ERROR: parse_via: bad char </> on state 100 ERROR: parse_via on: </UDP ^M ^M > ERROR: parse_via: via parse error ERROR: get_hdr_field: bad via ERROR: bad header field ERROR: parse_msg: message=<SIP/2.0 404 Not Found^M Via: /UDP ^M ^M > ERROR: receive_msg: parse_msg failed it seems that a UA sends ^M which is wrong and openser doesn't support it. Is there any workaround for this? -- Mit freundlichen Gruessen / Kind regards Dominik Bay Cablesurf Technik

1 1

[Serusers] Core dump Presence snapshot 0.10.99-dev35-pa-4.1
by Dave 30 Oct '06

30 Oct '06

1 0

[Users] Does anyone use CPL-C module?
by Doug Meredith 30 Oct '06

30 Oct '06

Hi, I'm quite interested in CPL but I see almost no discussion of this on the list. Is anyone actually using this module? Is it worth looking at? Thanks for any info you can give me. Doug -------------------------------------------- Doug Meredith SystemGuard - Oracle remote support 877-974-8273 (87-SYSGUARD) 506-854-7997 www.systemguard.com

3 3

[Serusers] BYEs are not written to acc if gateway sends BYEs resulting from RTP timeout
by Ricardo Carvalho 30 Oct '06

30 Oct '06

Hi all, I've implemented RTP timeout in the gateway that I use along with Ser, to be able to overpass problems of wrong accounting resulting from power or network failure of some UA. This is apparently working fine as my gateway sends to Ser BYE messages after the established timeout, although only now I realised that Ser doesn't account those BYE messages!!! Why? Following ser.cfg code, I can see that the execution reads the setflag(1) that I use for accounting, but it seems that Ser doesn't care for these BYEs!! Any help would be much appreciated. Thanks in advance, Ricardo.

1 1

Fwd: [Users] Two Invites simultaneously
by ShivaSankar Padhy 30 Oct '06

30 Oct '06

Thank you Vamsi, The problem is for the saving(location) twice, Thanks a lot for cooperating and help me in solving the problem. Thanks, Shiva ---------- Forwarded message ---------- From: Vamsi Pottangi <vamsipottangi(a)gmail.com> Date: Oct 30, 2006 5:32 PM Subject: Re: [Users] Two Invites simultaneously To: ShivaSankar Padhy <shivapd1983(a)gmail.com> Thats good. I feel you should reply to the mailing list saying that problem is solved and it is a mistake in cfg where you were saveing the location twice. This will help people later who would face similar problem. ~Vamsi On 10/30/06, ShivaSankar Padhy <shivapd1983(a)gmail.com> wrote: > > > I am extremely Sorry, Actually, I was having Authentication problem, thats > why I have used the Same(please refere to the commented lines near by > save(location), I have commented when the problem is short out buy > bymistakely, I have not commented the Save(location). Well, Its a my foolish > fault. > > Thanks a Lot, It's worked now.Than ks a Lot. > > Bye, > Shiva > On 10/30/06, Vamsi Pottangi < vamsipottangi(a)gmail.com > wrote: > > > > Remove the first occurence of the save("location") in your script and > > try. Is there any reason why your have two occurences of save("location") ? > > > > On 10/30/06, ShivaSankar Padhy <shivapd1983(a)gmail.com> wrote: > > > > > > Yah, I forgot to Attch the file,Hear is the attachment. Hoping for a > > > quick response. > > > > > > Thanks and regards, > > > Shiva > > > > > > On 10/29/06, Vamsi Pottangi < vamsipottangi(a)gmail.com> wrote: > > > > > > > > > > > > Siva, > > > > > > > > Please send us the openser.cfg ... it is missing in your previous > > > > mail .... > > > > > > > > ~Vamsi > > > > > > > > On 10/29/06, ShivaSankar Padhy < shivapd1983(a)gmail.com> wrote: > > > > > > > > > Hi every one, > > > > > I am a new user of the openser.When I am trying to call to a > > > > > number, the invite messege is going to proxy server but from proxy, its > > > > > sending two invites simultaneously to two phones. > > > > > > > > > > I am attaching my openser.cfg for your kind information.Point to > > > > > be noted that, when the phone resisters, no value is being inserted in to > > > > > the location table of openser Database. > > > > > > > > > > Thanks in Advance, > > > > > Shiva > > > > > > > > > > _______________________________________________ > > > > > Users mailing list > > > > > Users(a)openser.org > > > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > > > > > > > > > > > > > > > > > > >

1 0

← Newer
1
2
3
4
5
6
7
...
35
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2006