sr-users October 2006

sr-users@lists.kamailio.org

189 participants
345 discussions

by Dimo

Hello, I have sent this a while ago but it did not come, so if you are getting the mail for the second time sorry. You may be aware of the accounting problem with Daylight Savings Time. Currently in Radius accounting we have a timestamp of the event acoording to system clock (i think). So if a call starts soon before a daylight saving change and ends soon after it, it may have too big or negative duration, depending on whethere the clock moved forward or backward. Is there a way to make accounting take notice of that (maybe accounting in gmt+offset or something?) Any ideas appreciated, as you know DST is comming soon for europe at least. Dimitar

17 years, 5 months

[Users] Q:ABOUTE:SET UP MESSAGE FLOW

by Alejandro Sanchez

Hi evreybody. I need to set up the next message flow Tel.A = Phone A Tel.B = Phone B B = Balancer (openser 1.1) SS = Sip Server (openser 1.1) Tel.A B SS(get location) Tel.B INVITE ------------> INVITE -------> INVITE <------- INVITE ---------------------------> 200 OK <--------------------------- 200 OK -------> 200 OK <------- 200 OK <------------ 1.How can i send from SS to B the INVITE with the location of the Tel.B without B thiks that is a new INVITE. 2.Then route the INVITE to the Tel.B What module can help me to set up this flow? Alejandro Sanchez Thank's in Advanced. ___________________________________________________________ Do You Yahoo!? La mejor conexión a Internet y <b >2GB</b> extra a tu correo por $100 al mes. http://net.yahoo.com.mx

17 years, 5 months

[Users] Newbie questions

by Saúl Ibarra

Hi I'm new at using OpenSER. I plan to use OpenSER with a SIP proxy (rtpproxy?, mediaproxy?) in order to handle SIP client registrations and connections behind NAT, and then I want to pass the control to an Asterisk server, in order to make the call over an IAX trunk. I've been reading quite a lot documentation on both SER and OpenSER, but I can't figure out how to do it properly. Is there an example or a guide I can check? Thanks in advance. -- Saúl -- "Some people say why, other just say, why not." http://saghul.wordpress.com/

17 years, 5 months

[Users] UAC module. CANCEL request handling.

by Leonid Fainshtein

Hi, I try to use the "UAC module" for replacing header field "From". I defined the automatic mode for "From" restore (modparam("uac","from_restore_mode","auto")) and change "From" only for INVITE requests. It looks like I also have to change manually header filed "From" also in CANCEL requests. It is because UAC (call originator) sends CANCEL without header "Route" and therefore OpenSer can't perform the automatic replacement. Do I miss anything? Is there a way to implement automatic header field "From" handling for the CANCEL requests? Thank you in advance, Leonid Fainshtein

17 years, 5 months

[Users]Can OpenSER uses same TCP session from the registration in some TLS case?

by Pat wang

Hi, I am working on the TLS with OpenSER and I found an something interesting. If an INVITE received by OpenSER with a Request-URI of the client AOR then OpenSER proxy the request via the same TCP session established during registration. If the INVITE has a Request-URI of the client's contact URI then OpenSER start a new TCP session. For example: One Eyebeam registers with AOR as: user1(a)tlstest.com and has a contact URI of user1(a)192.168.100.1. When an INVITE contains a RURI as user1(a)tlstest.com then OpenSER look up the location table and replace it with the user1(a)192.168.100.1 then proxy it via the same TCP session as the one during the registration. If an INVITE already has RURI as user1(a)192.168.100.1 then OpenSER proxy this INVITE by starting a new TCP session and Eyebeam does not accept the new session. The call will be failed in this case. I can't find any solution to fix this issue. Could someone know this issue please give some advice? Thanks, Patrick _________________________________________________________________ All-in-one security and maintenance for your PC. Get a free 90-day trial! http://clk.atdmt.com/MSN/go/msnnkwlo0050000002msn/direct/01/?href=http://ww…

17 years, 5 months

[Users] OpenSER not working after running for several days

by Papadopoulos Georgios

Hi Richard, This is a very interesting discussion. However I don't think our situations are similar. Just to make it clear, in your case, did OpenSER slow down or stop working at all? Was it something that happened gradually? In my case, it runs fine for several days. There are no delays, no slowing down of any kind. Then suddenly it stops responding. There is no script change, nothing at all. Actually most of the times it happened during the night when there is nobody around "playing" with DNS, network settings etc. So what could be causing this? Can I set up some sort of logging that will help find the cause of this? I have no clue what kind of information I should be logging. Most of my troubleshooting is done with ngrep. I could redirect this to a log file, but with the volume of traffic that we have, a few hours would be enough to fill the disk. thank you for any help George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

17 years, 5 months

[Serusers] fr_inv_timer + avp not working under high load

by Marcus Hunger

Hi list, I am trying to realise dynamic invite-timeout-timers loading timer-settings per call from my database using avp. It seems to work perfectly on my development-system but fails nearly completly in my high loaded life-environment. According to my logs, timer values are set correctly (eg.: reply_received: FR_INV_TIMER = 15, see modules/tm/t_reply.c:1371), but most of the times the timers have no effect. My setup is similar to http://siprouter.onsip.org/doc/gettingstarted/ch09.html, but avps are not written by hand, but acquired with: modparam("tm", "fr_inv_timer_avp", "mytimer"); avp_db_load("$ruri/username","s:mytimer"); 'mytimer' is an attribute in an usr_preferences-table. Ser's version is 0.9.6. I already searched the list-archives without finding anything regarding this issue. I Also failed accessing the bug-tracker (http://bugs.sip-router.org/), it gave me an internal server error. Has anybody experienced this effect? Is this a bug? Is there a workaround? Best regards, Marcus Hunger

17 years, 5 months

[Users] Measuring QoS with OpenSER

by Andreas Granig

Hi, I just came across http://www.golem.de/0602/43572.html (sorry, German). It states that AVM contributed GPL'ed source code to OpenSER, which allows an UAC to send QoS measurement samples to the SIP proxy after finishing a call. The goal is to have steady QoS monitoring without changing or extending the network topology. Are these extensions somewhere in CVS or isn't it intended to be released to the public? Andy

17 years, 5 months

[Users] OT: sipit19 conclusions

by Klaus Darilion

Hi! I found this link on the sip mailing list. http://www.sipit.net/report19.txt regards klaus -- Klaus Darilion nic.at

17 years, 5 months

[Users] Any trick to log ACK with siptrace?

by Rodrigo P. Telles

Hi Folks, Is there any trick to log ACK method using siptrace module? I'm trying with: ... modparam("siptrace", "trace_flag", 22) modparam("siptrace", "trace_on", 1) route { if (is_method("INVITE|ACK|BYE")) { setflag(22); }; ... but only INVITE and BYE method has been logged! I'm using OpenSER 1.1.0-notls. Thanks for any help Rodrigo Telles

17 years, 5 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2006