sr-users September 2005

sr-users@lists.kamailio.org

231 participants
507 discussions

[Users] RE: AW: [Serusers] CDRtool-3.3.3

by harry gaillac

Hello, > That's what i find in > http://cdrtool.ag-projects.com/EVALUATION.txt I read it but can we set the billing application for non commercial use ? I just can't install the basic gui which one read the radacct table . I can't set rates tables, ... Does ag-projects.com provide a very limited of CDRTool ? Thanks for help Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

19 years, 2 months

[Serusers] re: SER, rtpproxy, and zyxel wifi phone

by Yair Hakak

hi all, i have a zyxel wifi phone running with SER. it registers fine, and i can dial out. However, i can't hear anything. configuration is as follows: zyxel behind nat (d-link home router) <->SER on public IP:5060 <->asterisk on same public IP:5070 i set up an extension on asterisk to play music, called it from the zyxel. no music. i am using rtpproxy. and the zyxel is set up with NAT=outbound proxy. if i do the same from an ATA behind the same nat, i get the music. does anyone have a zyxel working behind a nat, and have a config to share? or any other help? all help is much appreciated, yair

19 years, 2 months

[Users] Radius Authorization and AVP Retrieval

by Tavis P

I'm having some trouble trying to integrate both Radius authentication and Radius AVP storage. I'm using freeradius and there doesn't seem to be much documentation regarding configuration semantics and such. Could anyone share some information on how they were able to use a Radius server to authenticate requests and (with avp_radius) as an AVP retrieval mechanism? I'm uncertain as to how I can stack these two uses of data on the freeradius server, the problem is that when a client authenticates (either INVITE proxy-authorization or REGISTER) the radius transaction is successfull and several SIP-AVP attributes are returned. Later on in the script i'm trying to use the avp_radius module (avp_load_radius function) to load SIP-AVPs for the callee which fails on the radius server due to the lack of digest authentication credentials in the radius requst. Is there some technique i can employ on the freeradius server to allow this second transaction? I'm not a freeradius expert and so i have not yet found a way to do this tavis

19 years, 2 months

[Serusers] Stun Exception

by rajesh volluru

hi Would anyone please help me handling below exception while using sip communicator 2594 [NetworkDiagnosticsThread] ERROR common.NetworkDiagnostics - The network diagnostics process has failed with the following exception net.java.stun4j.StunException: An Exception occurred while sending message bytes through a network socket! at net.java.stun4j.stack.NetAccessManager.sendMessage(NetAccessManager.java:397) at net.java.stun4j.stack.StunClientTransaction.sendRequest(StunClientTransaction.java:205) at net.java.stun4j.stack.StunProvider.sendRequest(StunProvider.java:95) at net.java.stun4j.client.BlockingRequestSender.sendRequestAndWaitForResponse(BlockingRequestSender.java:79) at net.java.stun4j.client.NetworkConfigurationDiscoveryProcess.doTestI(NetworkConfigurationDiscoveryProcess.java:284) at net.java.stun4j.client.NetworkConfigurationDiscoveryProcess.determineAddress(NetworkConfigurationDiscoveryProcess.java:186) at net.java.sip.communicator.common.NetworkDiagnostics.run(NetworkDiagnostics.java:94) Caused by: java.lang.NullPointerException: null address || null buffer at java.net.PlainDatagramSocketImpl.send(Native Method) at java.net.DatagramSocket.send(DatagramSocket.java:611) at net.java.stun4j.stack.NetAccessPoint.sendMessage(NetAccessPoint.java:200) at net.java.stun4j.stack.NetAccessManager.sendMessage(NetAccessManager.java:393) ... 6 more Thanks Rajesh --------------------------------- Yahoo! India Matrimony: Find your partner now.

19 years, 2 months

[Users] CDRtool-3.3.3

by harry gaillac

Hello, I wish to setup CDRTool-3.3.3 in order to test a billing system. I can't configure neither rating engine nor SOAP/XML server in non commercial release ! Does anybody know this billing system ? Regards harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

19 years, 2 months

[Serusers] | operator

by Federico Giannici

The "|" operator (in expressions like method == "REGISTER|INVITE|MESSAGE") seems to DON'T work when used more than once in the string (with more than two choices). Is this a known limitation? Thanks. -- ___________________________________________________ __ |- giannici(a)neomedia.it |ederico Giannici http://www.neomedia.it ___________________________________________________

19 years, 2 months

[Serusers] using postgresql

by Nhadie

Hi All, I'd like to use postgres instead of mysql. Is there a script like ser_mysql.sh to create the database/tables or should I add it manually? Regard Nhadie

19 years, 2 months

[Serusers] reach a radius attribute

by Mihaly Zachar

Hi everybody, I would like to build a condition, based on an attribute (h323-preferred-lang), what I get while the registration process. How can I reach this value in ser.cfg ?? What should I read about it ? Thanks, regards, Misi

19 years, 2 months

[Serusers] ONSIP Script + Java Rockx ser 0.9.0 script

by Aisling O'Driscoll

Hello everyone, I am trying to modify the Onsip call forward script to forward to asterisk voicemail given a users preference. I am using the script that Java RockX (Paul) posted in January... http://mail.iptel.org/pipermail/serusers/2005-January/014968.html I think I am getting very confused though with the logic...I want users to be able to load their preference using the avpops module of whether they want call forward on no answer or voicemail. They get directed to voicemail if they dial their own extension number....I have posted the modified script which is a combination of the Pauls script and the Onsip script...When I start SER I currently have these errors but I'd say these are a consequence of my messed up logic ;).... 0(20031) ERROR:parse_avp_name: unsupported type [1] 0(20031) ERROR:add_avp_galias_str: <500> not a valid AVP name 0(20031) parse error (70,20-21): Can't set module parameter The config is below.... If anyone can offer some insight, Id be very grateful. Many thanks, Aisling. # $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V. Teigre/emailAddress=greger(a)onsip.org $ #debug=3 #fork=yes #log_stderror=no #listen=x.x.x.x # INSERT YOUR IP ADDRESS HERE #port=5060 #children=4 check_via=no dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://root:password@localhost/ser" alias="x.x.x.x:5060" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/cpl-c.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/permissions.so" loadmodule "/usr/local/lib/ser/modules/speeddial.so" loadmodule "/usr/local/lib/ser/modules/group.so" modparam("auth_db|permissions|uri_db|usrloc", "db_url", "mysql://root:password@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) #ping every 30 seconds modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") modparam("cpl-c", "cpl_db", "mysql://root:password@localhost/ser") modparam("cpl-c", "cpl_table", "cpl") modparam("cpl-c", "cpl_dtd_file", "/tmp/ser-0.9.3/modules/cpl-c/cpl-06.dtd") modparam("cpl-c", "lookup_domain", "location") modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("speeddial", "db_url", "mysql://root:password@localhost/ser") modparam("speeddial", "user_column", "userid") modparam("speeddial", "sd_user_column", "short_user") modparam("speeddial", "sd_domain_column", "short_domain") modparam("speeddial", "new_uri_column", "real_uri") modparam("avpops", "avp_url", "mysql://root:password@localhost/ser") modparam("avpops", "avp_table", "usr_preferences") modparam("avpops", "avp_aliases", "voicemail=1:500;calltype=i:700;fwd_no_answer_type=1:701;fwd_busy_type =1:702") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; #------------------------------------------------------------------ # NOTIFY Keep Alive Section #------------------------------------------------------------------ if ((method=="NOTIFY") && search("^Event: keep-alive")){ sl_send_reply("200", "OK"); break; }; #------------------------------------------------------------------ # Speed Dialing Section #------------------------------------------------------------------ if ((method=="INVITE") && (uri=~"^sip:[0-9]{2}@.*")) { sd_lookup("speed_dial"); }; #------------------------------------------------------------------ # Do not Disturb Section #------------------------------------------------------------------ #if(avp_db_load("$ruri/username", "s:donotdisturb")){ # if(avp_check("s:donotdisturb", "eq/y/i")){ # route(x) #whereever asterisk voicemail is # break; # }; #}; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); }; if (method=="INVITE"){ if(is_user_in("Request-URI", "voicemail")){ setflag(31); }; }; # ---------------------------------------------------------------------- -- # URI Compare Section # # Here we compare the "from" and "to" to see if the caller is dialing # their own extension. If so then we route to voicemail if needed # ---------------------------------------------------------------------- -- if (method=="INVITE") { avp_write("$from", "i:34"); if (avp_check("i:34", "eq/$ruri/i")) { if (isflagset(31)) { route(8); break; } else { sl_send_reply("486", "Busy"); break; }; }; }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); break; }; if (method=="CANCEL") { route(1); break; } else if (method=="INVITE") { if(!cpl_run_script("incoming", "is_stateless")) { # script execution failed t_reply("500", "CPL script execution failed"); }; route(3); break; } else if (method=="REGISTER") { #handle REGISTER messages with CPL script cpl_process_register(); route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { if(isflagset(31)){ setflag(19); }; #sl_send_reply("404", "User Not Found"); #break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; #consume_credentials(); if (nat_uac_test("19")) { setflag(6); } lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; #Blind Call Forwarding if (avp_db_load("$ruri/username", "s:callfwd")){ setflag(22); avp_pushto("$ruri", "s:callfwd"); route(6); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; if (avp_db_load("$ruri/username", "s:fwdbusy")){ if(!avp_check("s:fwdbusy", "eq/$ruri/i")){ setflag(26); }; }; if (avp_db_load("$ruri/username", "s:fwdnoanswer")){ if(!avp_check("s:fwdnoanswer", "eq/$ruri/i")){ setflag(27); }; }; t_on_failure("1"); route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; } route[5]{ #----------------------------------------------------------------- # PSTN Handler #----------------------------------------------------------------- revert_uri(); rewritehostport("x.x.x.x:5064"); append_branch(); t_relay_to_udp("x.x.x.x", "5064"); break(); t_on_failure("1"); route(4); route(1); } route[6]{ #------------------------------------------------------------------ # Call Forwarding Handler # # This must be done as a route block because sl_send_reply() cannot # be called from the failure_route block #------------------------------------------------------------------- if(uri=~"^sip:1[0-9][10]@"){ strip(1); }; lookup ("aliases"); if(uri!=myself){ if(!isflagset(22)){ append_branch(); }; route(4); route(1); break; }; if(uri=~"^sip:011[0-9]*@"){ route(4); route(5); break; }; if(!lookup("location")){ if (uri=~"^sip:[0-9][10]@"){ route(4); route(1); break; }; sl_send_reply("404", "User Not Found"); }; route(4); route(1); } route[8] { # voicemail route #2 # # this path this executed during these conditions: # # cond 1) the called number is not in the location table # cond 2) the from_uri == to_uri (ie, caller==callee) if (method == "INVITE" || method == "ACK"){ force_rtp_proxy(); }; rewritehostport("x.x.x.x:5064"); t_on_reply("1"); if (!t_relay()) { if(method == "INVITE" || method == "ACK"){ unforce_rtp_proxy(); }; sl_reply_error(); }; } route[9]{ #voicemail route 1 # #this path is executed during these conditions: # # cond 1) the called number is in the location table # but the callee did not answer the phone (i.e. failover to voicemail) rewritehostport("x.x.x.x:5064"); append_branch(); t_on_reply("1"); if (!t_relay()){ if(method == "INVITE" || method=="ACK"){ unforce_rtp_proxy(); }; sl_reply_error(); }; } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } failure_route[1]{ if(t_check_status("487")){ break; }; if(isflagset(26) && t_check_status("486")){ if(avp_pushto("$ruri", "s:fwdbusy")){ avp_delete("s:fwdbusy"); resetflag(26); append_branch(); route(6); break; }; }; #Here we can have either voicemail OR forward no answer #forward on no answer is flag 27 #voicemail is flag 31 if(isflagset(27) && t_check_status("408")){ if(avp_pushto("$ruri", "s:fwdnoanswer")){ avp_delete("s:fwdnoanswer"); resetflag(27); append_branch; route(6); break; }; } else if(isflagset(31) && avp_pushto("$ruri", "$voicemail")){ avp_delete("$voicemail"); route(9); break; }; } -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

19 years, 2 months

RE: [Serusers] how to load radius-related modules in ser 0.8.14?

by Ricardo Martinez

Hi Shuai You need to edit the ser "Makefile" to include the radius related modules and then recompile SER. There is a HOWTO for Radius somewhere in the website. Regards, Ricardo Martinez > -----Mensaje original----- > De: zhangshuai [mailto:zhangshuai@goldentek.biz] > Enviado el: Miércoles, 21 de Septiembre de 2005 7:42 > Para: serusers > Asunto: [Serusers] how to load radius-related modules in ser 0.8.14? > > > Dear all, > > > I'm new to SER. I wish to use softphone X-lite on SER and > radius in db_mode. > > I have installed SER 0.8.14 (by tarball) and Mysql 3.23.54 in > Redhat 9. Also, I have added some subscribers into DB "ser". > After setting /usr/local/etc/ser/ser.cfg as the document > "iptel.org SIP Express Router v0.11.0 -- Admin's > Guide"(http://www.iptel.org/ser/doc/seruser/seruser.html#DEFAU > LTSCRIPT) guided, I could load the modules "auth" and > "auth_db" and successfully log any subscriber that Mysql > contains in X-lite. > > And now, I want to load radius-related modules: "acc", > "auth_radius", "group_radius", "uri_radius" in SER. But when > I put only one line: "loadmodule > "/usr/local/lib/ser/modules/auth_radius.so"" in ser.cfg and > then run ser, there is an error reply: "ERROR: bad config > file (1 errors)". > > How come? How to load those modules properly? > > Many thanks. > > > > Shuai > http://www.godentek.biz > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

19 years, 2 months

← Newer
1
...
15
16
17
18
19
20
21
...
51
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2005