sr-users July 2005

sr-users@lists.kamailio.org

199 participants
544 discussions

[Serusers] BYE
by Sebastian Kühner 29 Jul '05

29 Jul '05

Hi! I'm connecting to a Cisco PSTN Gateway for international calls. I'm using a Port Restricted Cone NAT. I can make calls and make a hangup with MY phone, but if the callee at the other side of the gateway hangs up, I do not get the BYE-Message. That could be the problem of the Restricted Cone NAT... or someone has another idea? Thanks! Sebastian

2 1

[Serusers] exec_msg problem
by Sam Lee 29 Jul '05

29 Jul '05

Hi, Have anyone seen this kind of error message before : ERROR: exec_msg: cmd echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO >> /var/log/syslog failed. exit_status=-1, errno=32: Broken pipe This command is actually in my ser.cfg where i capture this few environmental variables and push them into my /var/log/syslog. It effectively went in, but i still see this error message. Here is the original code in ser.cfg : exec_msg("echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO >> /var/log/syslog"); Please help! Regards, Sam

2 1

RE: [Serusers] Problem : Can SER process the reINVITE messages pr operly?
by Ricardo Martinez 29 Jul '05

29 Jul '05

Thanks again Alberto. Are you using the ser.cfg from onsip.org? I'm using it, and i can't make it work with reinvite to a nat'd endpoints. Can you give me some hints here?. For example what version of mediaproxy are you using?. If you're using the onsip.org configuration, Did you modified this configuration to make it work for reINVITE's? Hope you can help me, Thanks again Regards, Ricardo Martinez.- -----Mensaje original----- De: Alberto Cruz [mailto:acruz@tekbrain.com] Enviado el: Miércoles, 27 de Julio de 2005 16:50 Para: Ricardo Martinez CC: 'serusers(a)lists.iptel.org' Asunto: Re: [Serusers] Problem : Can SER process the reINVITE messages pr operly? Importancia: Alta Yes it is working fine. Regards Ricardo Martinez wrote: Alberto. Thanks for your answer. You mean that your platform works well with the reINVITE's to a NAT'd endpoint?. Regards, Ricardo.- -----Mensaje original----- De: Alberto Cruz [ mailto:acruz@tekbrain.com <mailto:acruz@tekbrain.com> ] Enviado el: Miércoles, 27 de Julio de 2005 16:12 Para: Ricardo Martinez CC: 'Greger V. Teigre'; ' serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org> ' Asunto: Re: [Serusers] Problem : Can SER process the reINVITE messages pr operly? Importancia: Alta Ricardo this block is working fine to me: #------------------------------------------------- # subsequent messages withing a dialog should take the # path determined by record-routing #------------------------------------------------- if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); # The following lines are added due media proxy if (has_totag()&&(method=="INVITE" || method=="ACK")) { if (client_nat_test("3") || search("^Route:.*;nat=yes")) { # Mark as NAT'ed setflag(6); use_media_proxy(); }; }; if ((method=="BYE") && ((client_nat_test("3") || search("^Route:.*;nat=yes")))) { fix_nated_contact(); force_rport(); }; # end media session for BYE and CANCEL is done above # before entering the loose route. no need to call it here route(1); break; }; Maybe you have something wrong at your mediaproxy.ini file. Regards Alberto Cruz

2 1

RE: [Serusers] i can't start ser could somebody help~~
by Sam Lee 29 Jul '05

29 Jul '05

It would help if you check either /var/log/messages or /var/log/syslog for error message pertaining to SER. Regards, Sam ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of ? ? Sent: Friday, July 29, 2005 2:25 PM To: serusers(a)lists.iptel.org Subject: [Serusers] i can't start ser could somebody help~~ hi the list! i have installed ser 0.8.12 and mysql,mysql is fine,but when restart ser then it appears 4 errors without saying why.i just did only a few modifies to ser.cfg ,this is the processing statements.could somebody tell me there the problem is.thanks very much and forgive my terrible english:) ot@localhost root]# ps -A PID TTY TIME CMD 1 ? 00:00:04 init 2 ? 00:00:00 ksoftirqd/0 3 ? 00:00:00 events/0 4 ? 00:00:00 kblockd/0 6 ? 00:00:00 khelper 5 ? 00:00:00 khubd 7 ? 00:00:00 pdflush 8 ? 00:00:00 pdflush 10 ? 00:00:00 aio/0 9 ? 00:00:00 kswapd0 117 ? 00:00:00 kseriod 156 ? 00:00:00 kjournald 1205 ? 00:00:00 kjournald 1206 ? 00:00:00 kjournald 1578 ? 00:00:00 syslogd 1582 ? 00:00:00 klogd 1603 ? 00:00:00 portmap 1623 ? 00:00:00 rpc.statd 1650 ? 00:00:00 rpc.idmapd 1744 ? 00:00:00 smartd 1754 ? 00:00:00 acpid 1766 ? 00:00:00 cupsd 1954 ? 00:00:00 sshd &n bsp;1969 ? 00:00:00 xinetd 1988 ? 00:00:00 sendmail 1997 ? 00:00:00 sendmail 2008 ? 00:00:00 gpm 2030 ? 00:00:00 crond 2079 ? 00:00:00 xfs 2098 ? 00:00:00 atd 2117 ? 00:00:00 dbus-daemon-1 2133 ? 00:00:00 mdadm 2159 tty1 00:00:00 mingetty 2165 tty2 00:00:00 mingetty 2171 tty3 00:00:00 mingetty 2177 tty4 00:00:00 mingetty 2183 tty5 00:00:00 mingetty 2189 tty6 00:00:00 mingetty 2195 ? 00:00:00 gdm-binary 2382 ? 00:00:00 gdm-binary 2393 ? 00:03:22 X 2423 ? 00:00:00 gnome-session 2485 ? 00:00:00 ssh-agent 2495 ? 00:00:01 gconfd-2 2498 ? 00:00:00 gnome-keyring-d 2500 ? 00:00:00 bonobo-activati 2502 ? 00:00:00 gnome-settings- 2507 ? 00:00:00 fam 2599 ? 00:00:01 metacity 2603 ? 00:00:01 gnome-panel ;2605 ? 00:00:02 nautilus 2607 ? 00:00:01 magicdev 2609 ? 00:00:00 eggcups 2611 ? 00:00:00 pam-panel-icon 2613 ? 00:00:11 rhn-applet-gui 2614 ? 00:00:00 pam_timestamp_c 2617 ? 00:00:00 gnome-vfs-daemo 2620 ? 00:00:00 clock-applet 2648 ? 00:00:00 mapping-daemon 2650 ? 00:00:00 notification-ar 2652 ? 00:00:00 mixer_applet2 2659 ? 00:00:00 wnck-applet 2661 ? 00:00:59 gnome-terminal 2662 ? 00:00:00 gnome-pty-helpe 2663 pts/1 00:00:01 bash 4506 pts/1 00:00:00 vsftpd 8355 pts/1 00:00:01 find 8871 pts/1 00:00:00 safe_mysqld 8895 pts/1 00:00:00 mysqld 9017 pts/2 00:00:00 bash 12474 pts/1 00:00:00 ps __________________________________________________ 赶快注册雅虎超大容量免费邮箱? http://cn.mail.yahoo.com

1 0

[Serusers] i can't start ser could somebody help~~
by 皮面 29 Jul '05

29 Jul '05

hi the list! i have installed ser 0.8.12 and mysql,mysql is fine,but when restart ser then it appears 4 errors without saying why.i just did only a few modifies to ser.cfg ,this is the processing statements.could somebody tell me there the problem is.thanks very much and forgive my terrible english:) ot@localhost root]# ps -A PID TTY TIME CMD 1 ? 00:00:04 init 2 ? 00:00:00 ksoftirqd/0 3 ? 00:00:00 events/0 4 ? 00:00:00 kblockd/0 6 ? 00:00:00 khelper 5 ? 00:00:00 khubd 7 ? 00:00:00 pdflush 8 ? 00:00:00 pdflush 10 ? 00:00:00 aio/0 9 ? 00:00:00 kswapd0 117 ? 00:00:00 kseriod 156 ? 00:00:00 kjournald 1205 ? 00:00:00 kjournald 1206 ? 00:00:00 kjournald 1578 ? 00:00:00 syslogd 1582 ? 00:00:00 klogd 1603 ? 00:00:00 portmap 1623 ? 00:00:00 rpc.statd 1650 ? 00:00:00 rpc.idmapd 1744 ? 00:00:00 smartd 1754 ? 00:00:00 acpid 1766 ? 00:00:00 cupsd 1954 ? 00:00:00 sshd 1969 ? 00:00:00 xinetd 1988 ? 00:00:00 sendmail 1997 ? 00:00:00 sendmail 2008 ? 00:00:00 gpm 2030 ? 00:00:00 crond 2079 ? 00:00:00 xfs 2098 ? 00:00:00 atd 2117 ? 00:00:00 dbus-daemon-1 2133 ? 00:00:00 mdadm 2159 tty1 00:00:00 mingetty 2165 tty2 00:00:00 mingetty 2171 tty3 00:00:00 mingetty 2177 tty4 00:00:00 mingetty 2183 tty5 00:00:00 mingetty 2189 tty6 00:00:00 mingetty 2195 ? 00:00:00 gdm-binary 2382 ? 00:00:00 gdm-binary 2393 ? 00:03:22 X 2423 ? 00:00:00 gnome-session 2485 ? 00:00:00 ssh-agent 2495 ? 00:00:01 gconfd-2 2498 ? 00:00:00 gnome-keyring-d 2500 ? 00:00:00 bonobo-activati 2502 ? 00:00:00 gnome-settings- 2507 ? 00:00:00 fam 2599 ? 00:00:01 metacity 2603 ? 00:00:01 gnome-panel 2605 ? 00:00:02 nautilus 2607 ? 00:00:01 magicdev 2609 ? 00:00:00 eggcups 2611 ? 00:00:00 pam-panel-icon 2613 ? 00:00:11 rhn-applet-gui 2614 ? 00:00:00 pam_timestamp_c 2617 ? 00:00:00 gnome-vfs-daemo 2620 ? 00:00:00 clock-applet 2648 ? 00:00:00 mapping-daemon 2650 ? 00:00:00 notification-ar 2652 ? 00:00:00 mixer_applet2 2659 ? 00:00:00 wnck-applet 2661 ? 00:00:59 gnome-terminal 2662 ? 00:00:00 gnome-pty-helpe 2663 pts/1 00:00:01 bash 4506 pts/1 00:00:00 vsftpd 8355 pts/1 00:00:01 find 8871 pts/1 00:00:00 safe_mysqld 8895 pts/1 00:00:00 mysqld 9017 pts/2 00:00:00 bash 12474 pts/1 00:00:00 ps __________________________________________________ 赶快注册雅虎超大容量免费邮箱? http://cn.mail.yahoo.com

1 0

[Serusers] SER + SERNAT + MySQL
by Truong Chi Thanh 29 Jul '05

29 Jul '05

Hi all, My name is chithanh. I'm working at Vietnam. Now I'm using with SER. I have a case with SER. | ser database | | | ============================ || || | SER (5060) | | SERNAT + nathelper + rtpproxy (5082) | || || | user1 | | user2 | Explain : user1 registered SER ===> SER save("location") for user1 into table "location" of "ser" database. user2 registered SERNAT ===> SER save("location") for user2 into table "location" of "ser" database. My purpose : user1 can call for user2. user can call for user1. Real when I run with this case. User1 can't call for User2. (although i had setted db_mode=1 for both) because : + User1 INVITE User2 ==> SER lookup("location") into SER's memory. Not lookup in ser database. + Use2 INVITE User1 ==> SERNAT lookup("location") into SERNAT's memory. Not lookup in ser database. I want SER and SENAT when lookup("location"), they must lookup in table "location" of ser database. How do u to solve for this problem ? Please help me. =================================== My config of SERNAT : # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=yes # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5082 listen=abc.com alias=abc.com children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local//lib/ser/modules/sl.so" loadmodule "/usr/local//lib/ser/modules/tm.so" loadmodule "/usr/local//lib/ser/modules/rr.so" loadmodule "/usr/local//lib/ser/modules/maxfwd.so" loadmodule "/usr/local//lib/ser/modules/usrloc.so" loadmodule "/usr/local//lib/ser/modules/registrar.so" loadmodule "/usr/local//lib/ser/modules/mysql.so" loadmodule "/usr/local//lib/ser/modules/nathelper.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local//lib/ser/modules/auth.so" loadmodule "/usr/local//lib/ser/modules/auth_db.so" #loadmodule "/usr/local//lib/ser/modules/auth_radius.so" loadmodule "/usr/local//lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1) modparam("usrloc", "db_url", "sql://ser:heslo@localhost/ser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # Accounting modparam("acc", "log_level", 2) #modparam("acc", "log_flag", 3) #modparam("acc", "log_missed_flag", 3) modparam("acc", "db_flag", 3) modparam("acc", "db_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("chinhnam.com","subscriber")) { www_challenge("chinhnam.com", "0"); break; }; fix_nated_contact(); save("location"); break; }; #End if(method=="REGISTER") if (method=="INVITE") { if (proxy_authorize("chinhnam.com","subscriber")) { if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }else { proxy_challenge("chinhnam.com", "0"); break; }; #End if (proxy_authorize("chinhnam.com", "subcriber")) }; #End if(method=="INVITE") fix_nated_contact(); force_rtp_proxy(); t_on_reply("1"); #setflag(3); }; #End if(uri=="myself") # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #End main routing logic onreply_route[1] { fix_nated_contact(); if (status=~"[12][0-9][0-9]") { force_rtp_proxy(); } } ============================================================================ My config of SER : # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=yes # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 listen=chinhnam.com alias=chinhnam.com children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local//lib/ser/modules/sl.so" loadmodule "/usr/local//lib/ser/modules/tm.so" loadmodule "/usr/local//lib/ser/modules/rr.so" loadmodule "/usr/local//lib/ser/modules/maxfwd.so" loadmodule "/usr/local//lib/ser/modules/usrloc.so" loadmodule "/usr/local//lib/ser/modules/registrar.so" loadmodule "/usr/local//lib/ser/modules/mysql.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local//lib/ser/modules/auth.so" loadmodule "/usr/local//lib/ser/modules/auth_db.so" #loadmodule "/usr/local//lib/ser/modules/auth_radius.so" loadmodule "/usr/local//lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1) modparam("usrloc", "db_url", "sql://ser:heslo@localhost/ser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # Accounting modparam("acc", "log_level", 2) #modparam("acc", "log_flag", 3) #modparam("acc", "log_missed_flag", 3) modparam("acc", "db_flag", 3) modparam("acc", "db_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("chinhnam.com","subscriber")) { www_challenge("chinhnam.com", "0"); break; }; save("location"); break; }; #End if(method=="REGISTER") if (method=="INVITE") { if (proxy_authorize("chinhnam.com","subscriber")) { if(uri=~"sip:63[0-9]*@") { rewritehostport("192.168.200.248:5060"); }else if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }else { proxy_challenge("chinhnam.com", "0"); break; }; #End if (proxy_authorize("chinhnam.com", "subcriber")) }; #End if(method=="INVITE") #setflag(3); }; #End if(uri=="myself") # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #End main routing logic ============================================================================= Note: SER (5060) only signaling SIP for my user. Not use media proxy. SER (5082) : signaling SIP + RTP path for my user. Use nathelper + rtpproxy Thanks very much everything you had done for me. Truong Chi Thanh --------------------------------- Start your day with Yahoo! - make it your home page

1 0

[Serusers] SIP Service Providers supporting Windows Messenger 4.6
by Michael Kendall 28 Jul '05

28 Jul '05

Hi, Reading the SERusers digest for a few months has allowed me to read about a lot of very complex and specialized problems. It's a bit intimidating. Although I might some day want to learn to administer a Linux system and run my own SER server, at this point I would rather just become a paying customer on someone else's SER server. Many of the list participants are clearly professionals operating large SIP service providers. But none of these professionals have identified their organizations clearly enough to let me become their customer. Perhaps because the traditions of the list prohibit users from advertising their commercial services. Can someone please give me a recommendation of a SIP service provider which has good service and reasonable pricing. I need a service which will allow me to call between two computers, each running Windows Messenger 4.6/4.7 . I am aware that the latest version, Windows Messenger 5.1 does not allow connecting to third party service providers, and that is the reason that I am using the older versions. The Microsoft site does not tell me how to configure version 5.1 for STUN or for symmetric NAT. Every link that I have found for downloading version 4.6 points me back to the download page at microsoft.com, and microsoft has actually removed the file so all I get from them is a polite apology. Fair enough. So here is an interesting legal question that I suspect a lot of you SER wizards will know the answer to: Is it illegal for third parties sites to publicly offer the download of version 4.6 after microsoft has chosen to stop offering it? It was after all being given away free by Microsoft a short time ago. I am aware that freeworlddialup.com (FWD) is a good no-cost SIP service provider. Does FWD use SER as their server software? The latest version of FWD offers several options for User Agent software, but none of these UAs include a whiteboard feature, which I need for my tutoring service. Therefore, I need a SIP Service Provider which supports Windows Messenger 4.6/4.7 and has some configuration instructions for this particular UA. Hopefully the config instructions will tell me how to set Messenger up for STUN when I have a standard NAT, and for mediaproxy when I encounter a symmetric NAT. Googling for "SIP Service Provider" and "Windows Messenger 4.6" has led me to a lot of dead ends and out-of-date pages, such as the "old FWD site" at pulver.com which has detailed instructions for configuring Messenger 4.6, but the instructions no longer work. "Service provider temporarily unavailable". (permanently) Can anybody offer a Service Provider recommendation or volunteer to take me on as a customer? thanks Michael Kendall

1 0

[Serusers] Dest IP
by Sebastian Kühner 28 Jul '05

28 Jul '05

Hello, I need the destination IP of the user of the first INVITE message (user -> ser)... but dst_ip == xxx.xxx.xxx.xxx gives me the IP of ser. The problem is that I only want to force the rtp_proxy if the users are behind a Port restricted cone NAT (the scr-ips of them are known) Here is my code: # Force rtpproxy for users that are behind a Port Restricted Cone NAT if ((src_ip == xxx.xxx.xxx.xxx | dst_ip == xxx.xxx.xxx.xxx) && !(uri=~"sip:[0-9]{9,30}@.*")) { fix_nated_contact(); # Rewrite contact with source IP of signalling force_rport(); # Add rport parameter to topmost Via setflag(6); } Has anyone an idea how I can get the IP of the user? For example in the location database? Thanks! Sebastian

2 3

[Users] new features in development version
by Daniel-Constantin Mierla 28 Jul '05

28 Jul '05

Hello, the new features of OpenSER development version are detailed a bit in: http://openser.org/features-0.10.x.php If you find something missing or you want to add more text, please send a mail. Hope it will convince some new users to start testing it. Daniel

1 0

[Users] typos in documentation and use_domain question
by Klaus Darilion 28 Jul '05

28 Jul '05

Hi! In the uri_db documentation (all parameters): modparam("db_url", ".... ^^^^^^ shouldn't this be uri_db? In the group_radius documentation: modparam("group", ... ^^^^^^ shouldn't this be group_radius? I also wonder about the use_domain paramter in the radius modules. group_radius has this parameter, whereas all other radius modules (uri_radius, avp_radius, auth_radius) do not have this parameter? Is there a reason for this? regards, klaus

2 4

← Newer
1
2
3
4
5
6
7
8
...
55
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2005