sr-users July 2005

sr-users@lists.kamailio.org

199 participants
544 discussions

[Serusers] SER + PSTN problem
by Kuti Joe 29 Jul '05

29 Jul '05

Hi to all! I'm a new seruser, and I have a problem with SER and a PSTN gw what I can't solve. I have got 2 UAs, 1 SER server, 1 Cisco PSTN gw (by the side of the voip provider). All of them have public IP. Phone1 -------+ | SER --- PSTN gw | Phone2 -------+ When I call from Phone1 to Phone2 directly, it is working properly. But: If I call from Phone1 to Phone2 via the PSTN gw, then it's ringing out, and when I pick up Phone2 I hear the voice of Phone1, but in Phone1 I can't hear the voice of Phone2. If I call from Phone1 to other telephone numbers, I have the same problem. I would like to proxy the media on the server. I'm useing SER 0.8.14. ser.cfg attached Thank you very much for your effort, and sorry for my poor English... Regards, KutiJoe

2 1

RE: [Serusers] ser.pif file not found
by Sam Lee 29 Jul '05

29 Jul '05

Alternatively u could do a 'touch /var/run/ser.pid ' before doing serctl start -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Gary Reuter Sent: Friday, July 29, 2005 10:21 PM To: Colin Jordan Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] ser.pif file not found If you're using serctl to start ser, it should be setting the pid location properly... but the init.d ser script does not make ser create the pid file. The solution I used was to add OPTIONS="-P /var/run/ser.pid" after the RETVAL line in the init.d/ser script. On 7/29/05, Colin Jordan <cjordan(a)econetwireless.com> wrote: > > I cannot control SER via serctl stop/start due to the fact that when > it runs via this command it is not finding a ser.pid. I have searched > for ser.pid on my system and it is not there (was just making sure > that serctl was not looking in the wrong spot for the PID file). Any > suggestions?? > > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

RE: [Serusers] exec_msg problem
by Sam Lee 29 Jul '05

29 Jul '05

The problem is solved. Already post a reply earlier on with the solution. It was becos the function don't seem to like my syntax. Anyway, thanks for the response! -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Thomas Britis Sent: Friday, July 29, 2005 8:10 PM To: serusers(a)lists.iptel.org Subject: Re: [Serusers] exec_msg problem Do you run ser as root ? $ l /var/log/syslog -rw-r----- 1 root root 115568 2005-07-28 18:50 /var/log/syslog If you're not root, so you can't write to /var/log/syslog. Sam Lee wrote: > Tried. It didn't work. :< > Still getting the same error. The result still came out, its just that it is followed by the error message. > > 101 INVITE : 3902 <sip:3902@x.x.x.x>;tag=5086b56866af3edo0 to > <sip:967258002@x.x.x.x> Jul 29 16:26:16 abc > /usr/local/sbin/ser[10577]: ERROR: exec_msg: cmd echo "$SIP_HF_CSEQ : > $SIP_HF_FROM to $SIP_HF_ TO" >> /var/log/syslog failed. > exit_status=-1, errno=32: Broken pipe > > > > -----Original Message----- > From: Xavier TRENTIN [mailto:xtrentin@softiphone.net] > Sent: Friday, July 29, 2005 4:11 PM > To: Sam Lee > Subject: Re: [Serusers] exec_msg problem > > Try to quote the expression you want to echo like this: > > exec_msg('echo "$SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO">> > /var/log/syslog'); > > > Xavier. > > Sam Lee a écrit: > > >>*********************** >>Pas de virus detecté dans l'attachement no filename Pas de virus >>detecté dans l'attachement no filename Pas de virus detecté dans >>l'attachement no filename >> >>Votre Mail a été vérifié par InterScan. >>***********-*********** >> >> >> >> >>---------------------------------------------------------------------- >>-- >> >>Sujet: >>[Serusers] exec_msg problem >>Expéditeur: >>"Sam Lee" <sam.lee(a)super.net.sg> >>Date: >>Fri, 29 Jul 2005 11:35:53 +0800 >>Destinataire: >><serusers(a)lists.iptel.org> >> >> >>Hi, >> >>Have anyone seen this kind of error message before : >> >>ERROR: exec_msg: cmd echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO >> >>/var/log/syslog failed. exit_status=-1, errno=32: Broken pipe >> >>This command is actually in my ser.cfg where i capture this few >>environmental variables and push them into my /var/log/syslog. It >>effectively went in, but i still see this error message. >>Here is the original code in ser.cfg : >>exec_msg("echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO >> >>/var/log/syslog"); >> >>Please help! >> >>Regards, >>Sam >> >>---------------------------------------------------------------------- >>-- >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > -- Thomas Storino Britis TCNet Inf e Telecom LTDA _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

RE: [Serusers] LCR on onsip.org - No DB tables created?
by Ricardo Martinez 29 Jul '05

29 Jul '05

Hello Dave. If i'm not wrong, there is a shell script included in the last SER version to create all the DB tables related to SER. I think there is in : /sip_router/scripts/ and is called "ser_mysql.sh" You can try that!. Regards, Ricardo Martinez > -----Mensaje original----- > De: Dave [mailto:ddx66@yahoo.com] > Enviado el: Viernes, 29 de Julio de 2005 11:16 > Para: serusers(a)lists.iptel.org > Asunto: [Serusers] LCR on onsip.org - No DB tables created? > > > Hi, I downloaded and installed the ser-0.9.3 from > onsip.org with the intention of using LCR. Although, > the LCR module was complied, I do not see the tables > lcr, gw in the DB? How do I create them? > Thanks > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] LCR on onsip.org - No DB tables created?
by Dave 29 Jul '05

29 Jul '05

Hi, I downloaded and installed the ser-0.9.3 from onsip.org with the intention of using LCR. Although, the LCR module was complied, I do not see the tables lcr, gw in the DB? How do I create them? Thanks __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Serusers] ser.pif file not found
by Colin Jordan 29 Jul '05

29 Jul '05

I cannot control SER via serctl stop/start due to the fact that when it runs via this command it is not finding a ser.pid. I have searched for ser.pid on my system and it is not there (was just making sure that serctl was not looking in the wrong spot for the PID file). Any suggestions?? DISCLAIMER: The information in this message is confidential and is legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized.If receiving in error please accept our apologies and notify the sender immediately. You must also delete the original message from your machine. If you are not the intended recipient, any use, disclosure, copying, distribution or action taken in reliance of it, is prohibited and maybe unlawful.

2 1

AW: [Serusers] dbtext: table not loaded. example desired
by Müller Thorsten 29 Jul '05

29 Jul '05

Hi, Thanks for your fast response! I read this readme file, but I'm stucked with it. Which file or files do I need for dbtext authentication? Is there a special name necessary? When I'm right I give the name in the ser.cfg with the following line if (!www_authorize("domain.com", "subscriber")) { In my case "subscriber". And the directory where to find the file with the following line modparam("auth_db", "db_url","dbtext:///var/dbtext/ser") in my case /var/dbtext/ser How can I use not plain password but encrypted ones and finally are three "x" enough for ha1 and ha1b or do I need to hash some values and write them down here? Why does ser give me the reply "table not loaded", when these entries are correct meaning written after the README. How can I fill the "subscriber" file with users and passwords? Texteditor I think, because serctl is only for mysql. Thanks Thorsten Mueller mt> -----Ursprüngliche Nachricht----- mt> Von: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] mt> Gesendet: Freitag, 29. Juli 2005 10:55 mt> An: Müller Thorsten mt> Cc: serusers(a)lists.iptel.org mt> Betreff: Re: [Serusers] dbtext: table not loaded. example desired mt> mt> mt> Hello, mt> mt> On 07/29/05 11:16, Müller Thorsten wrote: mt> mt> > Hi all, mt> > mt> > I try to set up ser with dbtext as authentication basis. mt> I run in some mt> > problems because the database is not found: mt> > DBT:db_query: table not loaded. mt> > mt> > After some googling a found that Cesc mt> [cesc.santa(a)gmail.com] had also mt> > done some work with dbtext and mailed that to "serusers" mt> or "serdev" mt> > mailinglists mt> > mt> > In a mail from May and June 05 he told that he has mt> written a "serctl" mt> > for dbtext and a script to produce the necessary files. mt> > mt> > Has somebody got these things and can mail me these mt> files! I could not mt> > found them in the mailing history. mt> > mt> > Has somebody also dealed with dbtext and can give me some example mt> > files for ser.cfg and dbtext files for mt> "authentication/subscriber" and mt> > "location". mt> > mt> rhe readme file of dbtext module has some examples of table mt> structures mt> as well as a simple config file. mt> mt> http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/mod mt> ules/dbtext/README?rev=HEAD&content-type=text/vnd.viewcvs-markup mt> mt> Daniel mt> mt> > Thanks in advance mt> > mt> > Thorsten Mueller mt> > mt> > ser 0.8.14 cross-compiled for arm mt> > My ser.cfg: mt> > #################################################### mt> > ... mt> > # Added by mt for authentication with dbtext mt> > loadmodule "/usr/local/lib/ser/modules/auth.so" mt> > loadmodule "/usr/local/lib/ser/modules/auth_db.so" mt> > loadmodule "/usr/local/lib/ser/modules/dbtext.so" mt> > mt> > modparam("auth_db", "db_url","dbtext:///var/dbtext/ser") mt> > mt> > # -- auth params -- mt> > modparam("auth_db", "calculate_ha1", 1) mt> > modparam("auth_db", "password_column", "password") mt> > modparam("auth_db", "user_column", "username") mt> > modparam("auth_db", "domain_column", "domain") mt> > ... mt> > mt> > if (uri==myself) { mt> > mt> > if (method=="REGISTER") { mt> > mt> > if (!www_authorize("domain.com", "subscriber")) { mt> > www_challenge("domain.com", "0"); mt> > break; mt> > }; mt> > save("location"); mt> > break; mt> > } mt> > ... mt> > ##################################################### mt> > mt> > I have a file in /var/dbtext/ser which is called "subscriber": mt> > ##################################################### mt> > username(str) password(str) ha1(str) domain(str) ha1b(str) mt> > suser:supasswd:xxx:domain.com:xxx mt> > ##################################################### mt> > mt> >----------------------------------------------------------- mt> ------------- mt> > mt> >_______________________________________________ mt> >Serusers mailing list mt> >serusers(a)lists.iptel.org mt> >http://lists.iptel.org/mailman/listinfo/serusers mt> > mt> > mt>

2 1

RE: [Serusers] exec_msg problem
by Sam Lee 29 Jul '05

29 Jul '05

Tried. It didn't work. :< Still getting the same error. The result still came out, its just that it is followed by the error message. 101 INVITE : 3902 <sip:3902@x.x.x.x>;tag=5086b56866af3edo0 to <sip:967258002@x.x.x.x> Jul 29 16:26:16 abc /usr/local/sbin/ser[10577]: ERROR: exec_msg: cmd echo "$SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_ TO" >> /var/log/syslog failed. exit_status=-1, errno=32: Broken pipe -----Original Message----- From: Xavier TRENTIN [mailto:xtrentin@softiphone.net] Sent: Friday, July 29, 2005 4:11 PM To: Sam Lee Subject: Re: [Serusers] exec_msg problem Try to quote the expression you want to echo like this: exec_msg('echo "$SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO">> /var/log/syslog'); Xavier. Sam Lee a écrit: >*********************** >Pas de virus detecté dans l'attachement no filename >Pas de virus detecté dans l'attachement no filename >Pas de virus detecté dans l'attachement no filename > >Votre Mail a été vérifié par InterScan. >***********-*********** > > > > > ------------------------------------------------------------------------ > > Sujet: > [Serusers] exec_msg problem > Expéditeur: > "Sam Lee" <sam.lee(a)super.net.sg> > Date: > Fri, 29 Jul 2005 11:35:53 +0800 > Destinataire: > <serusers(a)lists.iptel.org> > > > Hi, > > Have anyone seen this kind of error message before : > > ERROR: exec_msg: cmd echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO >> > /var/log/syslog failed. exit_status=-1, errno=32: Broken pipe > > This command is actually in my ser.cfg where i capture this few > environmental variables and push them into my /var/log/syslog. It > effectively went in, but i still see this error message. > Here is the original code in ser.cfg : > exec_msg("echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO >> > /var/log/syslog"); > > Please help! > > Regards, > Sam > >------------------------------------------------------------------------ > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > >

2 1

[Serusers] dbtext: table not loaded. example desired
by Müller Thorsten 29 Jul '05

29 Jul '05

Hi all, I try to set up ser with dbtext as authentication basis. I run in some problems because the database is not found: DBT:db_query: table not loaded. After some googling a found that Cesc [cesc.santa(a)gmail.com] had also done some work with dbtext and mailed that to "serusers" or "serdev" mailinglists In a mail from May and June 05 he told that he has written a "serctl" for dbtext and a script to produce the necessary files. Has somebody got these things and can mail me these files! I could not found them in the mailing history. Has somebody also dealed with dbtext and can give me some example files for ser.cfg and dbtext files for "authentication/subscriber" and "location". Thanks in advance Thorsten Mueller ser 0.8.14 cross-compiled for arm My ser.cfg: #################################################### ... # Added by mt for authentication with dbtext loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/dbtext.so" modparam("auth_db", "db_url","dbtext:///var/dbtext/ser") # -- auth params -- modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("auth_db", "user_column", "username") modparam("auth_db", "domain_column", "domain") ... if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("domain.com", "subscriber")) { www_challenge("domain.com", "0"); break; }; save("location"); break; } ... ##################################################### I have a file in /var/dbtext/ser which is called "subscriber": ##################################################### username(str) password(str) ha1(str) domain(str) ha1b(str) suser:supasswd:xxx:domain.com:xxx #####################################################

3 2

RE: [Serusers] exec_msg problem
by Sam Lee 29 Jul '05

29 Jul '05

Solved IT! Stupid error. Old : exec_msg("echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO>> /var/log/syslog"); New : exec_msg("(echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO)>> /var/log/syslog); That solves it! It seems like the exec_msg is not happy about the syntax that I gave it. :> Thank for all the help! Regards, Sam -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Sam Lee Sent: Friday, July 29, 2005 4:30 PM To: Xavier TRENTIN; serusers(a)lists.iptel.org Subject: RE: [Serusers] exec_msg problem Tried. It didn't work. :< Still getting the same error. The result still came out, its just that it is followed by the error message. 101 INVITE : 3902 <sip:3902@x.x.x.x>;tag=5086b56866af3edo0 to <sip:967258002@x.x.x.x> Jul 29 16:26:16 abc /usr/local/sbin/ser[10577]: ERROR: exec_msg: cmd echo "$SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_ TO" >> /var/log/syslog failed. exit_status=-1, errno=32: Broken pipe -----Original Message----- From: Xavier TRENTIN [mailto:xtrentin@softiphone.net] Sent: Friday, July 29, 2005 4:11 PM To: Sam Lee Subject: Re: [Serusers] exec_msg problem Try to quote the expression you want to echo like this: exec_msg('echo "$SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO">> /var/log/syslog'); Xavier. Sam Lee a écrit: >*********************** >Pas de virus detecté dans l'attachement no filename Pas de virus >detecté dans l'attachement no filename Pas de virus detecté dans >l'attachement no filename > >Votre Mail a été vérifié par InterScan. >***********-*********** > > > > > ---------------------------------------------------------------------- > -- > > Sujet: > [Serusers] exec_msg problem > Expéditeur: > "Sam Lee" <sam.lee(a)super.net.sg> > Date: > Fri, 29 Jul 2005 11:35:53 +0800 > Destinataire: > <serusers(a)lists.iptel.org> > > > Hi, > > Have anyone seen this kind of error message before : > > ERROR: exec_msg: cmd echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO >> > /var/log/syslog failed. exit_status=-1, errno=32: Broken pipe > > This command is actually in my ser.cfg where i capture this few > environmental variables and push them into my /var/log/syslog. It > effectively went in, but i still see this error message. > Here is the original code in ser.cfg : > exec_msg("echo $SIP_HF_CSEQ : $SIP_HF_FROM to $SIP_HF_TO >> > /var/log/syslog"); > > Please help! > > Regards, > Sam > >----------------------------------------------------------------------- >- > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

← Newer
1
2
3
4
5
6
7
...
55
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2005