sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

[Serusers] Groß/Klein-Schreibung mit SER und Windows-Messenger

by Hendrik Utsch

Sehr geehrte Damen und Herren, bei der Verwendung des Sip Express Routers in Verbindung mit dem Windows-Messenger kann es zu Problemen kommen, da beide Produkte Case-sensitive arbeiten, der Windows-Messenger sich aber die Groß- oder Klein-Schreibung der SIP-URI merkt. Hat man z.B. den Namen fälschlicherweise klein geschrieben, so wird der Windows-Messenger auch bei weiteren Verbindungsversuchen den kleingeschriebenen Namen verwenden, auch wenn man ihn fortan richtig schreibt. Der Verbindungsaufbau endet jedes Mal mit der Fehlermeldung "404 Not Found"! Dieser Umstand hat mich drei Tage mühevollen Suchens gekostet. Es wäre schön, wenn ein Hinweis hierzu auf die issues-Liste von iptel.org aufgenommen werden könnte! Es reicht allerdings sich mit dem Windows-Messenger ab- und wieder an-zumelden, damit er den "falschen" Namen wieder vergisst! Mit freundlichen Grüßen Hendrik Utsch Dipl.-Ing. (FH) Systemtechnik eMail: hendrik.utsch(a)tecsphere.com

19 years, 4 months

[Serusers] HELP!!!RTPProxy!!

by jenny

Hi, I download rtpproxy from http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/rtpproxy/. But now I can't install it properly. I can't run 'configure' script. My operate system is RedHat9.0. Can you tell me how to deal with it? Thanks a lot!! 　　　　　　　　jenny 　　　　　　　　xueyou38(a)tom.com 　　　　　　　　　　2005-04-28

19 years, 4 months

[Serusers] serweb (directory index forbidden)

by Llanos Serna García-Conde

19 years, 4 months

[Serusers] redirect to another gateway

by Nhadie

Hi All, How can I redirect calls to pstn to another gateway when one gateway doesn't respond to an INVITE (maybe because it has a problem), or when that gateway sends me 503 service unavailable or 404 not found. TIA Nhadie

19 years, 4 months

RE: [Serusers] Working ser.cfg with mySQL authentication

by Graham Lewis

Thanks Leon - that seem to have fixed that problem. Graham Lewis -----Original Message----- From: Leon Sun [mailto:leon.sun@keywestcommunications.com] Sent: 27 April 2005 20:11 To: info(a)beeplove.com; Graham Lewis; serusers(a)lists.iptel.org Subject: RE: [Serusers] Working ser.cfg with mySQL authentication Delete modparam("auth_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") from your cfg. In my cfg(0.8.14), I never used it and it works. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of m36828253-1(a)imap.1and1.com Sent: April 27, 2005 10:02 AM To: graham.lewis(a)spitfire.co.uk; serusers(a)lists.iptel.org Subject: RE: [Serusers] Working ser.cfg with mySQL authentication According to error log, you should have syntax error in here: fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" but these two lines looks good to me. Are you sure, ser -E is using this configuration file? why dont you try with -f switch, like ser -E -f /etc/ser/ser.cfg, assuming your ser configuration file located at /et/ser/ser.cfg. Thanks, Mohammad Here is the start of the ser.cfg that shows errors: dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" modparam("auth_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- # ser -E 0(50633) parse error (5,1-12): syntax error 0(50633) parse error (5,12-13): unknown config variable 0(50633) parse error (7,1-11): ERROR: bad config file (3 errors) -----Original Message----- From: m36828253-1(a)imap.1and1.com [mailto:m36828253-1@imap.1and1.com] Sent: 27 April 2005 17:36 To: Graham Lewis; serusers(a)lists.iptel.org Subject: RE: [Serusers] Working ser.cfg with mySQL authentication HI Graham, This log says, there have syntax error in your configuration file. Why don't you post first 10/15 lines of you configuration file. Thanks, Mohammad Original Message: ----------------- From: Graham Lewis graham.lewis(a)spitfire.co.uk Date: Wed, 27 Apr 2005 17:20:15 +0100 To: serusers(a)lists.iptel.org Subject: [Serusers] Working ser.cfg with mySQL authentication Does anyone have a working example of ser.cfg with mySQL authentication they can share please. I have version 03a of the Onsip "SER Getting Started" documentation but the example given results is errors: # ser 0(49443) parse error (8,1-12): syntax error 0(49443) parse error (8,12-13): unknown config variable 0(49443) parse error (10,1-11): ERROR: bad config file (3 errors) # I think the Onsip doc. authors acknowledge this but have not updated the doc. yet. Graham Lewis _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years, 4 months

[Serusers] sorry -- cannot open write fifo

by Ramakrishnan_S

Hi I have installed latest version of SER. I have been getting this error message "sorry -- cannot open write fifo" . There is a permission on the FIFO fr httpd process to read and write. But still I am getting error. Any pointers for to resolve this will be helpful. Thanks Rama DISCLAIMER: This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated.

19 years, 4 months

[Serusers] Runaway SER processes fully using CPU

by Cameron Beattie

I have experienced a situation where SER (0.9.1) has stopped processing all register requests. Note I am also running mediaproxy 1.3.0. TOP shows 8 ser processes running each using between 10-15% CPU. There is one zombie process which is shown as [SER] <defunct> when I do a ps ax. There are only 9 running processes (8 SER + top). This is a test server that is not doing anything else and I am simply trying to register 1 UA against it. The server was running fine for a few days and then suddenly went AWOL. I looked back through the log and found the following although I don't think this is causing the current problem Apr 25 20:36:51 beta mediaproxy[23057]: command request E4CFFBCB-05BF-4204-9F82-3AE0BB64F9F5(a)192.168.0.15 60.234.199.XXX:8000:audio 60.234.199.XXX beta.mydomain.co.nz remote 60.234.199.XXX remote X-Lite=20release=201103m info=from:beattiec@beta.mydomain.co.nz,to:beattiea@beta.mydomain.co.nz,fromtag:274519666,totag: Apr 25 20:36:51 beta mediaproxy[23057]: Traceback (most recent call last): File "/usr/local/bin/mediaproxy/modules/rtphandler.py", line 856, in __findRTPSlot dsock.bind((proxyIP, port)) File "<string>", line 1, in bind error: (99, 'Cannot assign requested address') Apr 25 20:36:51 beta mediaproxy[23057]: error: cannot create session for 'E4CFFBCB-05BF-4204-9F82-3AE0BB64F9F5(a)192.168.0.15': cannot find enough free ports for the media streams Any suggestions on what's the best way to try and find out what's causing it? Shouting "Stop" loudly did not work. Killing SER and starting again would probably work but I'd rather try to find out what went wrong. Maybe these are the pleasures of using a non-stable version? Regards Cameron

19 years, 4 months

[Serusers] HELP: how to get correct call duration??

by Charles Wang

Hi, ALL: I know ser can insert INVITE & BYE records to acc table. Maybe the timestamp of BYE record is correct but the timestamp of INVITE is not equal to the call start(after the callee answered). Is there any method to generate a record with timestamp when the callee answer? I think that it should be the callee responses "200 OK" after "100 Trying". How to do it??? -- Best Regards Charles

19 years, 4 months

[Serusers] HELP: lookup("aliases")

by Charles Wang

Hi, ALL: I have an username '1011' on my subscriber table and I want my 1011 can map to a name 'charles' for alias on my aliases table. all subscribers and aliases are the same domain. But I use lookup("aliases"), and I have a record on aliases table. ------------------------------------------------------------------------------------------------- username domain contact ------------------------------------------------------------------------------------------------- 1011 sip.company.com charles(a)sip.company.com ------------------------------------------------------------------------------------------------- I dial to 1011 from another UAC and register on the same ser sip proxy. It works fine. But I dial to charles. It failed. Does anybody know what it happen and how to solve it? -- Best Regards Charles

19 years, 4 months

[Serusers] jiri away from mail

by jiri kuthan

I'm out of office. If you have any urgent questions to iptelorg, call me or contact my colleague, Dr. Sisalem, sisalem(a)iptel.org. -Jiri

19 years, 4 months

← Newer
1
...
4
5
6
7
8
9
10
...
70
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005