sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

[Serusers] STUN and (Media/RTP)Proxy
by info＠beeplove.com 02 Apr '05

02 Apr '05

If a client come through STUN and behind NAT, SER dont need to do anything to handle NAT. correct me pls, if I am wrong. How ser will figure it out that whether a client is coming through STUN or not? Thanks, Mohammad -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

4 3

[Serusers] CIsco AS5300 X SER
by Welesley Sibelson Dias 02 Apr '05

02 Apr '05

Hi ALl I have one Cisco AS5300 i wanna use with PSTN Gateway What`s requeriments Software/Hardware to work with SER using codec G729a into one E1 Thks a lot.

2 1

Re: [Serusers] Missed call and accounting.
by harry gaillac 02 Apr '05

02 Apr '05

Hello Barry, I got the same problems I tried to get missed call,message stored, acounting and more but i think serweb scripts are not update I ever sent mails to Karel (serweb) . For example IM are stored in silo table but r_uri field is empty. I think of Serweb need some fixing. Harry --- Barry Murphy <barry(a)unix.co.nz> wrote: > Hey guys, > > Ok so I've added the following to my ser.cfg: > > modparam("usrloc|acc|auth_db|group|msilo", "db_url", > "mysql://ser:… [View More]

1 0

[Serusers] IM Messages
by Barry Murphy 02 Apr '05

02 Apr '05

Hey guys, Whats required in ser.cfg to get IM working with SER and SERWEB, I cant locate any docs on google. Thanks Barry

1 0

[Serusers] best practive callfwd, call divert etc
by Iqbal 02 Apr '05

02 Apr '05

Hi Is it better to do at server end, or client side (if supported) Iqbal

2 1

[Serusers] What's the problem of SER with Mysql
by ljzhang 02 Apr '05

02 Apr '05

Hi, I configure SER with Mysql. After I start SER, it don't show "successful" word, and can't end. No UA can register to SER. I found when UA sends Register message, it can't receive any response. But I use serctl command to monitor SER, I can't find any error. After I restart Linux again, Linux'start process is blocked when it is starting ser. My Linux op can't be started. That's horrible. Furthermore, After I configure SER with Mysql, I configure SER without Mysql again, SER also can't … [View More]start nomally. The only way is to remove it and restall it. Can you help me!! Thanks. My ser.cfg is as following: # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) # Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests #if (!mf_process_maxfwd_header("10")) { # sl_send_reply("483","Too Many Hops"); # break; #}; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"127.0.0.1") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("127.0.0.1", "subscriber")) { # www_challenge("127.0.0.1", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } 　　　　　　　　jenny 　　　　　　　　xueyou38(a)163.com 　　　　　　　　　　2005-04-01 [View Less]

4 4

Re: [Serusers] Nathelper/RTPProxy not working for agents behind NAT
by Vivienne Curran 02 Apr '05

02 Apr '05

Hello Paul, Thank you for responding. I have now read the getting started document. I am confused as to why my config should have supported two private clients on the same subnet communicating via rtpproxy [even though again i acknowledge its not the most efficient way to process the call] but anyhow I have decided to try to modify my script according to the sample rtpproxy/nathelper enabled scripted in the onsip document version 3. I will work from this as it will provide me with a solid … [View More]basis. I have a few simple questions though. I am getting an error with the parameter "has_totag()". The /var/log/messages says I am missing the loadmodule. What loadmodule supports the above parameter? Also I was unable to load the module uri_db.so. Is this module usually included with 0.8.14? Many Thanks, Vivienne. Java Rockx <javarockx(a)gmail.com> wrote: Perhaps our "getting started" document at http://www.onsip.org/ will help you. It's based on ser-0.9.x, but it does cover both mediaproxy and rtpproxy. Regards, Paul On Thu, 31 Mar 2005 19:22:23 +0100 (BST), Vivienne Curran wrote: > > > Hi, > > > > I am having problems troubleshooting a problem I am experiencing with my SER > configuration. I have ser 0.8.14 running with rtpproxy and nathelper > enabled. I have two phones on the same subnet behind nat and I would like to > make a call between the two. I want to invoke rtpproxy for this as they both > have private address [I know this isn't the most efficient way as they're > both on the same subnet but I can worry about that later]. > > > > When I ring from the phone 1 (2092) to phone 2 (2093), 2092 can hear voice > but 2093 can't. When 2093 ring 2092, there's no audio. These phones are > Grandstream BT100's. They have been configured to listen on different SIP > and RTP ports. > > > > 2092: SIP Port: 5060 > > 2092: RTP Port: 5004 > > 2093: SIP Port: 5061 > > 2093: RTP Port: 5005 > > > > I have tried to include my ser.cfg and SER message dumps but serbouncers > said the attachment was too big. I can try adding them again if requiredI > can confirm that my rtpproxy is working (originally I thought it wasn't) by > using "strace d -f F". I can see a signal being returned. > > > > Any help would be appreciated or advise as to how I can proceed > troubleshooting. > > Kindest Regards, > > Vivienne. > > Send instant messages to your online friends http://uk.messenger.yahoo.com > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > > Send instant messages to your online friends http://uk.messenger.yahoo.com [View Less]

2 3

[Serusers] Missed call and accounting.
by Barry Murphy 02 Apr '05

02 Apr '05

Hey guys, Ok so I've added the following to my ser.cfg: modparam("usrloc|acc|auth_db|group|msilo", "db_url", "mysql://ser:serpass@localhost/ser") modparam("acc", "log_level", 2) modparam("acc", "log_flag", 1 ) modparam("acc", "log_missed_flag", 2) modparam("acc", "failed_transactions", 1) modparam("acc", "report_cancels", 1) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) #modparam("acc", "db_flag", 1 ) #modparam("acc", "log_level", 1) #modparam("acc", "log_missed_flag", 1)… [View More]

1 0

[Serusers] MYSQL database error with ser 0.9.0
by Aisling O'Driscoll 02 Apr '05

02 Apr '05

Hello , I have the following error when I am starting ser0.9.0: WARNING: no fork mode and more than one listen address found (will use only the first one) stateless - initializing 0(0) Maxfwd module - initializing textops - initializing 0(0)submit_query(): Unknown column 'table_version in 'field list' 0(0)submit_query(): Error while submitting query 0(0)table_version(): Error in db_query 0(0)register_udomain(): Error while querying table version 0(0)domain_fixup(): Error while registering … [View More]

2 1

[Serusers] (no subject)
by Shoaib Muhammad Siddiqui 02 Apr '05

02 Apr '05

Hi, I am just new to SER n the mailin list. I ned to configure my SER but I have failed to find the SER mysql Module plus all the other modules.. Can anyone plz help me from where can I download these modules? Thanx S h o a i b

5 8

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005