31 Mar
2005
31 Mar
'05
9:59 p.m.
If a client come through STUN and behind NAT,
SER dont need to do anything to handle NAT.
correct me pls, if I am wrong.
How ser will figure it out that whether a client is coming through STUN or
not?
Thanks,
Mohammad
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
1 Apr
1 Apr
10:40 a.m.
The client will use STUN to detect the type of NAT (coned, symmetric
...) and the public IP address:port.
If the NAT device can be traversed by means of STUN, then the client
uses the public IP address and port in the SIP messages (Via: header,
Contact: header, SDP, ...).
If the NAT device can't traversed by use of STUN (symmetric NAT), the
client has to behave dumb and does not use the public addresses. Thus,
it uses its private IP address:port (e.g. 192.168.0.2:5060) in the SIP
messages.
In ser, you will use nat_uac_test() to test the incoming messages. You
can test for private IP addresses in the various headers (Via, Contact,
SDP) and compare the Via: header with the IP-address:port the message is
coming from. If the client uses STUN and public IP address:port in the
SIP message, ser can not detect if the client is behind NAT. Thus, ser
does not NAT traversal - as it should be, because the client das NAT
traversal itself.
If the nat_uac_test detects that the SIP messages comes from a natted
client, then you have to use the various functions (force_contact,
nated_register, force_rtpproxy...) to rewrite the SIP messages.
regards,
klaus
PS: read the README from the nathelper module and the mediaproxy module.
You have to choose either nathelper-module+rtpproxy or the
mediaproxy-module+mediaproxy (from ag-projects).
info(a)beeplove.com wrote:
If a client come through STUN and behind NAT,
SER dont need to do anything to handle NAT.
correct me pls, if I am wrong.
How ser will figure it out that whether a client is coming through STUN or
not?
Thanks,
Mohammad
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
12:57 p.m.
The Getting Started document found at http://onsip.org/ has a thorough
walkthrough of NATing with examples for mediaproxy and rtpproxy.
g-)
Klaus Darilion wrote:
The client will use STUN to detect the type of NAT
(coned, symmetric
...) and the public IP address:port.
If the NAT device can be traversed by means of STUN, then the client
uses the public IP address and port in the SIP messages (Via: header,
Contact: header, SDP, ...).
If the NAT device can't traversed by use of STUN (symmetric NAT), the
client has to behave dumb and does not use the public addresses. Thus,
it uses its private IP address:port (e.g. 192.168.0.2:5060) in the SIP
messages.
In ser, you will use nat_uac_test() to test the incoming messages. You
can test for private IP addresses in the various headers (Via,
Contact, SDP) and compare the Via: header with the IP-address:port
the message is coming from. If the client uses STUN and public IP
address:port in the SIP message, ser can not detect if the client is
behind NAT. Thus, ser does not NAT traversal - as it should be,
because the client das NAT traversal itself.
If the nat_uac_test detects that the SIP messages comes from a natted
client, then you have to use the various functions (force_contact,
nated_register, force_rtpproxy...) to rewrite the SIP messages.
regards,
klaus
PS: read the README from the nathelper module and the mediaproxy
module. You have to choose either nathelper-module+rtpproxy or the
mediaproxy-module+mediaproxy (from ag-projects).
info(a)beeplove.com wrote:
If a client come through STUN and behind NAT,
SER dont need to do anything to handle NAT.
correct me pls, if I am wrong.
How ser will figure it out that whether a client is coming through
STUN or not?
Thanks,
Mohammad
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
2 Apr
2 Apr
4:52 p.m.
Kaaus, thansk for replying me.
One more question regarding this issue,
Say for example:
1. A UA is behind Symmetric NAT and its using STUN.
2. If SER use nat_uac_test(3), it will return true, right?
3. If UA is behind other types of NAT, would nat_uac_test(3) still
return true?
My question is, If a UA use STUN, SER dont need to do anything for NAT
for first three types of NAT.
Is nat_uac_test return false for first three types of NAT?
Thanks again,
Mohammad
Klaus Darilion wrote:
The client will use STUN to detect the type of NAT
(coned, symmetric
...) and the public IP address:port.
If the NAT device can be traversed by means of STUN, then the client
uses the public IP address and port in the SIP messages (Via: header,
Contact: header, SDP, ...).
If the NAT device can't traversed by use of STUN (symmetric NAT), the
client has to behave dumb and does not use the public addresses. Thus,
it uses its private IP address:port (e.g. 192.168.0.2:5060) in the SIP
messages.
In ser, you will use nat_uac_test() to test the incoming messages. You
can test for private IP addresses in the various headers (Via,
Contact, SDP) and compare the Via: header with the IP-address:port the
message is coming from. If the client uses STUN and public IP
address:port in the SIP message, ser can not detect if the client is
behind NAT. Thus, ser does not NAT traversal - as it should be,
because the client das NAT traversal itself.
If the nat_uac_test detects that the SIP messages comes from a natted
client, then you have to use the various functions (force_contact,
nated_register, force_rtpproxy...) to rewrite the SIP messages.
regards,
klaus
PS: read the README from the nathelper module and the mediaproxy
module. You have to choose either nathelper-module+rtpproxy or the
mediaproxy-module+mediaproxy (from ag-projects).
info(a)beeplove.com wrote:
If a client come through STUN and behind NAT,
SER dont need to do anything to handle NAT.
correct me pls, if I am wrong.
How ser will figure it out that whether a client is coming through
STUN or
not?
Thanks,
Mohammad
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6975
days inactive
6977
days old
3 comments
4 participants
participants (4)
-
Greger V. Teigre -
infoļ¼ beeplove.com -
Klaus Darilion -
Mohammad Khan