sr-users November 2005

sr-users@lists.kamailio.org

245 participants
570 discussions

by harry gaillac

Hello, How can I use textops module to rewrite all ip private addresses in sip contact hf with a public ip I can't write the right regexp. if search("^Contact sip:user@private ip$)) { replace_all ("private ip", "public ip"); }; Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 10 months

[Users] communication between openser and another server!

by messa＠innsof.com

Hi all! I want to know if it is possible to configure openser to communicate with another sip server? if it's possible , how can i do it? Best regards! Serge!

18 years, 10 months

[Users] Call queue

by Andréa Giordanna

Hi all, Does openser offer any support for call queues? Thanks, Giordanna --------------------------------- Yahoo! Acesso Grátis: Internet rápida e grátis. Instale o discador agora!

18 years, 10 months

[Serusers] 486 Busy & 2 UAs with identical usernames

by Ramin Nikaeen

Friends, I am using 2 SJPhone UAs (B, C) on two different networks, that register with my SER server using the same (username=XXXXXXX, password). >SJPhone - B (username:XXXXXXX) / INVITE / SJPhone - A (username: YYYYYYY) \ INVITE \ >SJPhone - C (username: XXXXXXX) I dial the phone number XXXXXXX from a third SJPhone (A). When only one of the destination SJPhones is registered with SER, let's say B, then B rings. Then while B is ringing, if "ignore" button is pushed, a 486 is generated by B and sent back to SER. Then SER receives the 486 in failure_route and processes it. But when both B and C are online, both B and C ring. when "ignore" button is pressed on B, 486 is generated by B and received by SER but SER does not enter the failure_route. When ignore is pressed on the first destination, I expect SER to send a CANCEL to the second destination and receive the 486 generated by the first destination in the failure_route so that I can forward the first destination to voicemail! Can anyone share any insight as to why this is happening? Thank you for your help in advance ramin

18 years, 10 months

[Serusers] Regarding Isolation of sip stack from SER

by nitin ganjsinghani

HI all *I'm doing a project on comparison of SER an OSIP* *can anybody plz assist me in telling that * *is it possible to isolate SIP stack and install only that* *if yes then how* ** *thanks* ** *Nitin*

18 years, 10 months

[Serusers] Which is Better!

by Goran Donev

Which Gateways is better. I want to know which gateways are better. I am comparing Audiocodes and Mediatrix. Anyone have any opinions on either one good or bad? Thanks

18 years, 10 months

[Serusers] RTP Proxy

by Kapil Dhawan

Hi List I am using rtpproxy from long now without actually knowing its proper internals. As far as i know, it is used to modify the SDP coming from Natted clients. Am i correct? Second, can i use it to develop Prepaid Application? Best Regards _________________________________________________________________ Vroom, Vrooooom! Get ready for the real speed. Drive the machine of your choice http://www.sulekha.com/classifieds/cllist.aspx?catid=280&nma=IN&c=Autos&ref…

18 years, 10 months

[Users] rewrite contact field

by harry gaillac

I try to rewrite contact field in sip hf because of fix_nat_contact() fail with this diagram -----ppp0[ ser/nathelper ] eth0----private network debian 3.1 when agents send INVITE or REGISTER to ser which listen on ppp0 the ip address in contact sip hf stay a private ip address, why ? I try siproxd which rewrite it . how can i build a ser.cfg in order to contact in sip hf will be rewritte Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 10 months

[Serusers] Quintum and radius_aith

by Ashutosh kumar

Hi all, I am using Quintum tenor platform (radius + pstn gw) to send my calls outwards to pstn. I am using radius authorization. The radius server is provided by Quintum itself as a packaged billing+gw solution. The radius auth packets seem to go from my ser and they even land on the radius server, but they are not visible in the "incoming requests" monitor of the radius server or its log, although they are visible in the Ethereal on the radius machine. What I doubt is whether the Quintum radius is supports digest requests or not, because my radius packets are working very fine with freeradius, although on a different machine. Correct me or ask for clarification when and where needed. Any help will be highly appreciated. PS: - As evident, I am not having any problem in my radiusclient.conf. - The radius server is running on standard ports. -There is no firewall policy on the Quintum radius server that blocks/denies/rejects any packets from ser. Regards, Ashutosh Kumar

18 years, 10 months

[Serusers] Same NAT again

by deviator

Hello! Can someone explain me how i can correctly check if 2 UA's are behind same NAT ? for example: A and B UA's have private 192.168.1.1 and 192.168.1.2, SER have a public ip A calling B For A all is clear for me - SRCIP have an A external ip and i can use it But i dont see any B external ip, RURI have a private ip part (192.168.1.2) Pls show me the way!

18 years, 10 months

← Newer
1
...
15
16
17
18
19
20
21
...
57
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2005