sr-users November 2005

sr-users@lists.kamailio.org

245 participants
570 discussions

by harry gaillac

I need to add some functions in my ser.cfg for nat support. I use my open(ser) as outbound proxy with two interfaces ppp0 and eth0. sip agents send requests to eth0. I want my packets passing through the register and invite blocks by fixing contact with a public ip. All packets from private network must be sent to eth0. Any suggestions Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 10 months

[Users] Norway pub event

by Greger V. Teigre

Hi guys, Let's meet for another *SER (i.e. openser/ser) pub event on Thursday September 24 around 18. To avoid confusion, we stay with the venue Beer Palace at Aker Brygge. (Yes, Oslo, Norway) Suggestion for topic of the day ;-) : Ways of accessing header data and manipulate values from ser.cfg, including avps, avpops, textops... Do we need them all and isn't this really a big, complicated mess that is the result of ad-hoc needs for functionality? People with limited travel budgets may input their opinions on the list ;-) g-)

18 years, 10 months

[Users] syntax for multihomed hosts

by harry gaillac

hello, what's the write syntax for mhomed=yes or mhomed=1 ? Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 10 months

[Users] SRV Lookups

by Douglas Garstang

All, I'm trying to get SRV lookups to work with OpenSER 1.0.0. I've exhausted every avenue of documentation including newsgroups, various forums etc. Using t_relay, OpenSER seems to be performing the correct DNS SRV queries and obtaining a list of hosts to try. Below are the relevant sections of my DNS zone file. We're talking UDP, and based on the priority and weights below, OpenSER should be basically doing a round-robin approach, and it seems to be. The problem occurs when one of the hosts is not contactable. OpenSER simply stops and does not try the next host in it's list. I would have thought that for OpenSER to fully support SRV lookups, it should try each until it is successful. After all, that's a large part of the whole point of SRV records. Does the t_relay() function have logic within itself to keep trying hosts until it gets a connection? What would be the definition a failure that would make it move onto the next host be anyway? Network failure certainly, but would a 'Not found' be considered a failure that would cause it to move on? Would anything other than an ACK be a failure? Is there some variable I can set or some function I can call that causes t_relay() to retry all hosts in it's SRV list? Without this feature, OpenSER's usefulness is very limited. Help very much appreciated. Doug bil-pdev-3 IN A 192.168.10.4 proxy1 IN CNAME bil-pdev-3 proxy2 IN CNAME bil-pdev-3 proxy.bil.voip.com. IN NAPTR 50 50 "s" "SIPS+D2T" "" _sips._tcp.proxy.bil.voip.com. proxy.bil.voip.com. IN NAPTR 60 60 "s" "SIP+D2U" "" _sip._udp.proxy.bil.voip.com. proxy.bil.voip.com. IN NAPTR 70 40 "s" "SIP+D2T" "" _sip._tcp.proxy.bil.voip.com. _sips._tcp.proxy.bil.voip.com. IN SRV 100 10 5061 proxy1.proxy.bil.voip.com. _sips._tcp.proxy.bil.voip.com. IN SRV 100 10 5061 proxy2.proxy.bil.voip.com. _sip._udp.proxy.bil.voip.com. IN SRV 100 10 5060 proxy1.proxy.bil.voip.com. ; This line and the next are SRV records being looked up _sip._udp.proxy.bil.voip.com. IN SRV 100 10 5060 proxy2.proxy.bil.voip.com. ; _sip._tcp.proxy.bil.voip.com. IN SRV 100 10 5060 proxy1.proxy.bil.voip.com. _sip._tcp.proxy.bil.voip.com. IN SRV 100 10 5060 proxy2.proxy.bil.voip.com. *._tcp IN SRV 0 0 0 . *._udp IN SRV 0 0 0 . ;

18 years, 10 months

Re: [Users] textops modules

by harry gaillac

Remarque : message transféré en pièce jointe. ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 10 months

[Users] Please help...... how to configure outgoing calls to pstn gateway

by Lokesh Kumar

Hello Friends, I am having openser, some sip clients registered on it.how do I have to configure openser.cfg and/or pstn.cfg.Inorder to make call from sip clients to outside number. I can call from outside number to my sip clients. but other way around is not working. My mobile ---->-------->| PSTN GW |--------->------->|OPENSER|---------->--------->| SIP CLIENT| This is working fine My mobile <-------<-------| PSTN GW |<-------<-------|OPENSER|<--------<----------| SIP CLIENT| This case is not working I am not getting any log related to my outgoing call on openser , through ngrep. Please help, Regards Lokesh

18 years, 10 months

[Serusers] Regading entry & exit function of stack & parser

by nitin ganjsinghani

i'm finding it very difficult to find the entry & exit functions of the parser & the stack moreover anyb can plz tell me the parser initialization function name as understanding the whole code is very tedious thanks nitin

18 years, 10 months

Re: [Users] textops modules

by Bogdan-Andrei Iancu

I see....in this case you cannot use replace() as the public IP will all the time be different (the public IP of nat). Use the fix_nated_contact() function from nathelper module: if msg is detected from behind nat, do fix_nated_contact() before fwd to *. regards, bogdan harry gaillac wrote: >In fact I meant: > >all private ip of the network replace with a pubil ip. >what about substution ? > >if search("^Contact sip:user@private ip$)) { > replace_all ("private ip", "public ip"); >}; > >You understand my problem . > > asterisk > || > Internet=[Ser/nat]==private network > >When ser receive REGISTER or INVITE the contact in sip >hf would be fixed >so asterisk would not record sip agent with AOR like >sip:user@private ip. > > >Harry > >--- Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> a >écrit : > > > >>Hi Harry, >> >>yes you can do this, but not that the change will >>not be local visible >>(in further script processing). the change will >>actually apply only when >>the message is sent out on the network. >> >>regards, >>bogdan >> >>harry gaillac wrote: >> >> >> >>>Hello, >>> >>>How can I use textops module to rewrite all ip >>> >>> >>private >> >> >>>addresses in sip contact hf with a public ip >>> >>>I can't write the right regexp. >>> >>>if search("^Contact sip:user@private ip$)) { >>>replace_all ("private ip", "public ip"); >>>}; >>> >>>Harry >>> >>> >>> >>> >>> >>> >>> >>> >>___________________________________________________________________________ >> >> >> >>>Appel audio GRATUIT partout dans le monde avec le >>> >>> >>nouveau Yahoo! Messenger >> >> >>>Téléchargez cette version sur >>> >>> >>http://fr.messenger.yahoo.com >> >> >>>_______________________________________________ >>>Users mailing list >>>Users(a)openser.org >>>http://openser.org/cgi-bin/mailman/listinfo/users >>> >>> >>> >>> >>> >> >> > > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com > >

18 years, 10 months

Re: [Serusers] Problem with serweb...

by Karel Kozlik

Hello, sorry I don't know. I never meet similar problem. Use google or try ask on a PHP forum (e.g. http://news.php.net/) regards Karel 昂達 napsal(a): > Hello Karel > I have checked the apache log file in "/var/log/httpd/error_log" > the file show this: > -------------------------------------------------------------------------------------------------------------------------------------------------------------------- > PHP Warning: PHP Startup: Unable to load dynamic library > '/usr/lib/php/modules/classkit.so' - /usr/lib/php/modules/classkit.so: > cannot open shared object file: Permission denied in Unknown on line 0 > -------------------------------------------------------------------------------------------------------------------------------------------------------------------- > > Then i change classkit.so permission to "777" and change owner to "apache". > But the error also exist. > How to slove this problem ?? > > Thank you so much > > 昂達，hunter1104(a)tw-airnet.net > <mailto:hunter1104(a)tw-airnet.net> > 2005-11-24 > > ----- 收到以下來信內容 ----- > *寄件人:* Karel Kozlik <mailto:karel@iptel.org> > *收件人:* hunter1104 <mailto:hunter1104@tw-airnet.net> > *時間:* 2005-11-22, 18:21:28 > *主題:* Re: [Serusers] Problem with serweb... > > Hi, > make sure if you are changeing right php.ini file. May be there is more > php.ini files in your system in various locations or may be php is > searching for php.ini in diferent directory. > > Also check log files: > - syslog > - apache log > - php log > > for messages related to this problem. > > regards > Karel > > 昂達 napsal(a): > > Hello karel > > > > I have tried the method that you offered > > In my phpinfo() , i haven't seen this: > > ---------------------------------------- > > classkit support enabled > > version 0.4 > > ----------------------------------------- > > but i have really installed classkit! > > and put it in "/usr/lib/php/modules/" > > i also set : > > extension_dir = "/usr/lib/php/modules" > > extension=classkit.so > > > > why it can not be loaded to php?? > > > > regards > > Hunter

18 years, 10 months

[Serusers] Tr: Re: [Users] textops modules

by harry gaillac

18 years, 10 months

← Newer
1
...
14
15
16
17
18
19
20
...
57
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2005