How can I chain two mediaproxies?
It's mentioned in the Readme, that this is possible, but it's
not mentioned how.
I have two SER servers in two networks, both running with mediaproxy.
Client A can reach SER A, SER A connects to SER B (with forward statement), which contacts Client B.
It's, because of the design of the networks, not possible
that client A can connect SER B or client B can connect SER A.
I configured SER and mediaproxy with default values (from the mediaproxy-example ser.cfg),
however, it seems, that the two mediaproxies don't talk to each other, they are waiting
for Client connection instead.
Regards,
Henry
Hello,
It it should be inside the source archive:
ftp://ftp.berlios.de/pub/ser/0.8.14/src/ser-0.8.14_src.tar.gz
Otherwise you can take it from CVS, link to rpm directory:
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/rpm/?only_with_tag…
This should be a direct link to spec file:
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/*checkout*/ser/sip_router/rpm/ser…
Daniel
On 8/26/2004 5:22 PM, Javier Ramirez wrote:
>Dear Daniel, thanks for yor answer, I'm gonna try ser over CentOS,
>www.caosity.org is a rebuild version of Red Hat, but I can't find the
>ser.spec file, at least in ftp://ftp.berlios.de/pub/ser/0.8.14/
>
>Many thanks for all, and congratulations for your work.
>
>
>El Jueves, 26 de Agosto de 2004 16:22, Daniel-Constantin Mierla escribió:
>
>
>>Hello,
>>since RedHat stopped supporting the old versions as well as releasing
>>new free versions of their linux system, I shifted to Debian - Fedora
>>Core 1 didn't look for me as mature system, never tried later releases.
>>
>>We considered it doesn't worth to support anymore RedHat packages, but
>>you can find the spec file needed to generate the rpm in your system. It
>>is located in sip_router/rpm/ser.spec-4.1. You need to install the
>>development libraries for mysql, radiusclient, expat and then check the
>>manual page for rpmbuild to see how to do it. You can then contribute
>>with these packages deploying them to a site for download and announcing
>>over this mailing list.
>>
>>If I recall correctly, there was someone who tried to build them, he had
>>some problems, I do not know if he succeeded finally, you can dig into
>>mailing list for it.
>>
>>Daniel
>>
>>On 8/26/2004 3:59 PM, Javier Ramirez wrote:
>>
>>
>>>Hi, again, I'm lloking for a RPM package for ser. I have read the
>>>ser-howto by Dan Austin but I can't find the package.
>>>Thanks to everybody.
>>>
>>>_______________________________________________
>>>Serusers mailing list
>>>serusers(a)lists.iptel.org
>>>http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>
>
>
I am having a rather odd problem. I had the Ser
server working for a while, but all the sudden,
strange stuff started happening. I have it running on
Redhat AS3 Server, with 2 network cards, one with a
public, and another with a private address. I have
the sip phones configured to have the public address
as the as their sip server. The strange thing is,
though, when I sniff, I see the darn server get the
Register request on the public interface, but sending
the OK response on the private one! I tried turning
the private IP interface off alltogether, but then it
simply sends nothing back at all...it has been very
frustrating, as it was working fine before.
John,
Download the source.
In the modules directory there is 'mysql' and there is also 'postgres'.
You can edit the main Makefile, remove 'postgres' from the
exclude_modules declaration. Compile and install.
I have not worked with the 0.8.14 version at all. I know the postgres
works
with 0.8.12, I've been using in production. There is probably some
work to be done to
make postgres module work with 0.8.14, I don't know. I need to make
some time
to work on that, but I haven't yet.
Please keep this on the list!
---greg
On Aug 25, 2004, at 11:53 PM, John Draper wrote:
> Greg Fausak wrote:
>
>> I am pretty sure it is already there.
>> I released it when I wrote it.
>>
>> It is used just like mysql via a .so file.
>>
> I was reading the installation notes for installing SER on OpenBSD,
> and
> in the INSTALL document, I quote;
>
> - libmysqlclient & libz (zlib) if you want mysql support (the mysql
> module)
> - libexpat if you want the jabber gateway support (the jabber module)
>
> What about for PostGreSQL? Are there any libraries I have to compile
> into "SER" like you see above for "mySQL".
>
> Do you have the build instructions for linking "SER" to PostGreSQL?
>
> I don't see any documentation that describes how to add PostGreSQL
> support in the SER build instructions.
>
> John
>
>
Greg Fausak
www.AddaBrand.com
(US) 469-546-1265
----- now with the content -----
Hello,
You will find attached my PostgreSQL database dump for Serweb; As I said
I'm not sure that all the fields are good enough, maybe you will have to
change some of them... Let me know if you make some modifications.
In order to run Serweb with PGSQL please do as follow:
1. load the SQL DDL file into your PGSQL
2. load at least one account with the same domain listed in
/serweb/html/set_domain.php
e.g. $config->domain = "your_domain.com";
2. modify:
/serweb/html/config_data_layer.php
$config->data_sql->type="pgsql";
$config->data_sql->host[$i]['host']="localhost"; //database host
$config->data_sql->host[$i]['port']=""; //database
port - leave empty for default
$config->data_sql->host[$i]['name']="database_name"; //database name
$config->data_sql->host[$i]['user']="your_login";
//database conection user
$config->data_sql->host[$i]['pass']="your_password";
I'm using the last SERWEB from the CVS. I think that's all you need to do.
If you succeed to connect please let me know.
Is there anybody using the last Serweb with Postgre ? Any chance to login ?
Thanks,
SB
John Draper <crunch(a)webcrunchers.com> wrote:
SB wrote:
>
> Hello,
>
> I'm using SERWEB but I have some trouble to login when the
> login/password is correct. If the password is wrong, I have an error
> message telling me "wrong password". But if the login/password is Ok,
> then the page start a long processing cycle without anything in return
> (after 5 minutes, blank page or server unreachable).
>
> In my configuration, I have:
>
>clear_text_pw=1
>
>
>
> My default domain match with the admin user's domain i'm using to
> login. The database I'm using is PostgreSQL (all serweb sql scripts
> have been ported to PGSQL, I will provide all the sql files as soon as
> everything is running smoothly).
>
You have this running under PostGreSQL? WOW! Cool... I'm just now
getting started setting up my SER
server, but have no clue on how to get it hooked into PostGres. Could
you point me to some documents you
found that tells me how to do it?
I'm using 0.8.10 by the way, should I install a newer version?
John
Hi, I write just to know if anyone knows if is possible to use ser as a
Gatekeeper for sip VoIP telephony.
Many thanks.
Javier Ramirez
Usuario Linux 250156
Hello SER Users,
I'm a new SER User and have installed it successfully on my 4.8 FreeBSD
machine running mysql 4.0.10-gamma. I successfully
"/usr/local/sbin/ser_mysql.sh create"ed but on editing
/usr/local/etc/ser/ser.cfg to uncomment out mysql support statements, i
get 1 error when i try to "/usr/local/sbin/ser restart" And no error on
commenting out the mysql statements. Any ideas why that error is coming?
Note: I can add and remove users using serctl
Thank you i advance,
Regards,
Wilson
---
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.282 / Virus Database: 150 - Release Date: 9/25/2001
Hi,
I got a copy of SER from ftp://ftp.berlios.de/pub/ser/0.8.14/ and I installed SER in my linux server.
Now I have four new directory in /usr/local:etc,lib,sbin,share.I modified /usr/local/etc/ser/ser.cfg
and it can run well. But when I include the vm.so and restart SER it returns an error:
"ERROR: bad config file (1 errors)".The attachment is my ser.cfg. How can I test the voicemail?
I installed ser-web also. I placed phplib in /usr/local/apache,and placed serweb in /usr/local/htdocs(
I renamed the directory html by serweb).When I type http://172.16.195.242/serweb/user_interface/index.php
in my IE,it turns out a login page and I can not login.I created a user with serctl in advance.I
checked the index.php and found the variable okey_x was not defined.
Thanks
jerry
