sr-users August 2004

sr-users@lists.kamailio.org

181 participants
424 discussions

by Shi Hoch

Is there any solution to that problem? I'm running a machine on the public and I'm not keen leaving it open all the time just for the media sessions. Does ser or the nathelper / mediaproxy modules send the port there are going to use? This way I think I can open just one port at a time and close it when the session ends. Shi Hoch

19 years, 9 months

[Serusers] Aliases Not Working

by Doug Eubanks

I have sucesfully gotten SER, SerWeb and MyStun installed and configured for the most part. I am using a MySQL backend, can differeniate between non-existant and offline users, and can tell if a user has voicemail configured if they are offline. I still can not get aliases to work. I configured the aliases using serweb, I am using the lookup("aliases") command in the ser.cfg and configured the usrloc module also. What am I missing? Thanks, Doug Eubanks admin(a)dougware.net *** DISCLAIMER *** This e-mail and any attachments thereto may contain information, which is confidential and/or protected by intellectual property rights and are intended for the sole use of the recipient(s) named above. Any use of the information contained herein (including, but not limited to, total or partial reproduction, communication or distribution in any form) by persons other than the designated recipient(s) is prohibited. If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer. Thank you for your cooperation.

19 years, 9 months

[Serusers] from & remote-party-id manipulation

by Linus Surguy

Hi, Can someone confirm there is not a way to do this with the standard commands before I write our own module. a) Incoming call has no remote-party-id, but does have a numeric from address. Create a remote-party-id based on the from address. Then... b) Either we have a remote-party-id passed with the initial call, or the one we constructed in (a). Now prepend a digit string pulled from the database to the user part of the remote-party-id uri. i.e. If no rpid, convert From: 12345(a)x.y to Remote-Party-ID: <sip:12345@x.y> then given Remote-Party-ID: <sip:12345@x.y> change to Remote-Party-ID: <sip:100012345> (the 1000 pulled from the database) Linus

19 years, 9 months

[Serusers] New User questions part 2

by Andrew Mee

In my continuing my questions. :) - Does SER support TLS? If not when will this be supported? -- Andrew Mee

19 years, 9 months

[Serusers] server_monitoring and server_monitoring_agg tables are blank.

by Sanjiv Ranjan

Hi all, My server_monitoring and server_monitoring_agg tables are blank. Do, I need to make any setting in ser.cfg file or require something special. Thanks, sanjiv

19 years, 9 months

[Serusers] /var/run/.nscd_socket not found

by Masoud Safi

Greetings, Any ideas as to why SER startup is looking for /var/run/.nscd_socket? It crashes in my case and here is the strace log: munmap(0x4002d000, 4096) = 0 socket(PF_UNIX, SOCK_STREAM, 0) = 4 connect(4, {sa_family=AF_UNIX, path="/var/run/.nscd_socket"}, 110) = -1 ENOENT (No such file or directory) close(4) = 0 Thanks MS _________________________________________________________________ MSN Toolbar provides one-click access to Hotmail from any Web page FREE download! http://toolbar.msn.click-url.com/go/onm00200413ave/direct/01/

19 years, 9 months

[Serusers] does_uri_exist does not find user in subscriber db?

by Francisco Cuellar

Hello all, I've been having trouble with does_uri_exist function in uri module..for some reason it does not see the username in the subscriber table.. am running ser-0.8.12 stable, checks.c file where function does_uri_exist resides in uri directory of Ser source is $Id: checks.c,v 1.10 2003/04/28 22:08:03 janakj Exp $ here are the options I'm loading for uri module modparam("uri", "db_url", "mysql://seruser:serpasswd@localhost/ser") modparam("uri", "subscriber_table", "subscriber") modparam("uri", "uri_table", "uri") modparam("uri", "uri_user_column", "username") modparam("uri", "uri_domain_column", "domain") modparam("uri", "uri_uriuser_column", "uri_user") modparam("uri", "subscriber_user_column", "username") modparam("uri", "subscriber_domain_column", "domain") this is the part on ser.cfg where I am trying to apply does_uri_exist if (!lookup("location")) { log(1, "LOG:USRLOC request not found\n"); if (does_uri_exist()) { log(1, "LOG:URI Exists\n"); if (is_user_in("Request-URI", "voicemail")) { rewritehostport("192.168.10.10:5090"); log(1, "LOG:USRLOC request not found,VM set,relay to VM\n"); if (!t_relay()) { sl_reply_error(); break; }; break; }; }; }; I know that the username is in the subscriber table username 4500 when I check the mysql db I get mysql> select * from subscriber where username=4500; | phplib_id | username | domain | password | first_name | last_name | phone | email_address | datetime_created | datetime_modified | confirmation | flag | sendnotification | greeting | ha1 | ha1b | perms | allow _find | timezone | ------+----------+ | c493919a77f0c3e2671dce9048a78cce | 4500 | sip.mydomain.com| 4500 | | | | 4500(a)sip.mydomain.com| 2004-06-25 00:32:27 | 0000-00-00 00:00:00 | | o | | | c49 3919a77f0c3e2671dce9048a78cce | 643bfb0b11229b401fc32c4af1b538d4 | NULL | 0 | NULL | +----------------------------------+----------+---------------------+------- ---+ but while running debug during a call to 4500 which is not in location db but is in subscriber table i get 0(20262) lookup(): '4500' Not found in usrloc 0(20262) LOG:USRLOC request not found 0(20262) does_uri_exit(): User in request uri does not exist 0(20262) LOG: Called not in location DB/n 0(20262) parse_headers: flags=16384 Is there something missing in my script that is needed by does_uri_exist? I really appreciate any help pointing me in the right direction Thanks Francisco

19 years, 9 months

[Serusers] ld.so.preload

by Masoud Safi

Greetings, Under my Redhat 9.0, I have installed SER from source. Trying to launch it but it fails with the following in my strace output. execve("/usr/local/sbin/ser", ["ser"], [/* 25 vars */]) = 0 uname({sys="Linux", node="sipsvr2", ...}) = 0 brk(0) = 0x81be9b8 open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory) A search of my HDD for file ld.so.preload did not find a file by that name. Any idea what ld.so.preload is, what it does and how I can fix this problem? Thanks MS _________________________________________________________________ Planning a family vacation? Check out the MSN Family Travel guide! http://dollar.msn.com

19 years, 9 months

Fwd: Re: [Serusers] softphone is failing to authenticate when login into SER

by David Lee

19 years, 9 months

[Serusers] ser 0.8.14 released

by Andrei Pelinescu-Onciul

The new ser stable version, ser 0.8.14 has just been released. This version is based on the latest rel_0_8_12 branch code and not on the cvs head. We decided to name it 0.8.14 to avoid confusion (0.8.13 was already taken by the unstable cvs branch). The new release can be downloaded from: ftp://ftp.berlios.de/pub/ser/0.8.14 (source code, pre-compiled binaries for various arhitectures, packages for various operating systems and linux distributions; for more informations see ftp://ftp.berlios.de/pub/ser/0.8.14/README ). If you use cvs, just add -rrel_0_8_14 to your cvs checkout command. Please read the attached NEWS file for more information. Andrei

19 years, 9 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2004