sr-users July 2004

sr-users@lists.kamailio.org

178 participants
449 discussions

[Serusers] offline users vs. non-existant

by Dave Bath

Hey everyone, I'm trying to work out how to recognise whether a user is offline or just doesn't exist. I have this snippet of code ... if (!lookup("location")) { <snip> if ((method=="INVITE" || method=="ACK") && t_newtran() ) { t_reply("404", "Not Found"); # Put an entry in the database acc_db_request("404 Not Found","missed_calls"); break; } else { # all other requests to off-line users are simply replied # statelessly and no reports are issued sl_send_reply("404", "Not Found"); break; }; However, I don't think it's right.. as I don't see under what situations I will reach the else statement... No matter whether I call an offline user or a non-existent user I always get a 404 Not Found and an entry is stored in the database... This is not ideal - I'd like to be able to differentiate between an offline and a non-existent user.. Can anyone help me on this please? Many thanks in advance, D ------------------------------------- Dave Bath dave(a)fuuz.com www.fuuz.com 07736 232085 NOTE: The information contained in this email is intended for the named recipients only, it may be privileged and confidential. If you are not the intended recipient, you must not copy distribute or take any action in reliance upon it. No warranties or assurances are made in relation to the safety and content of this email and any attachments. No liability is accepted for any consequences arising from it

19 years, 9 months

[Serusers] Serweb + missed calls

by Dave Bath

Hey guys, Having a small problem with calls to aliases not being displayed in serweb. If I call <username>@<host> then the missed call is displayed fine in the missed call section when <username> is logged in. If I call <alias>@<host> I don't see them in the call section when <username> is logged in. The calls to aliases are tagged and are in the database missed_calls table, they're just not displayed in serweb... any ideas? I'm using ser 814 and serweb 146 Many thanks in advance Dave ------------------------------------- Dave Bath dave(a)fuuz.com www.fuuz.com 07736 232085 NOTE: The information contained in this email is intended for the named recipients only, it may be privileged and confidential. If you are not the intended recipient, you must not copy distribute or take any action in reliance upon it. No warranties or assurances are made in relation to the safety and content of this email and any attachments. No liability is accepted for any consequences arising from it

19 years, 9 months

[Serusers] URI Module Preventing Logons

by Doug Eubanks

As soon as I add the loadmodule line for the URI module, I can't authenticate anymore, it times out and even the debug shows nothing, no auth requests, etc. I have tried with several sip clients. Can someone point me in the right direction? Thanks *** DISCLAIMER *** This e-mail and any attachments thereto may contain information, which is confidential and/or protected by intellectual property rights and are intended for the sole use of the recipient(s) named above. Any use of the information contained herein (including, but not limited to, total or partial reproduction, communication or distribution in any form) by persons other than the designated recipient(s) is prohibited. If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer. Thank you for your cooperation.

19 years, 9 months

RE: [Serusers] re : re : redirect using external application.

by Gandhi, Jignesh

I read the README file located in the exec module dir,but was not sure about interface, since there is not a lot of info. In the admin guide there is a few examples of exec_msg but none of the exec_dst. Has anyone implemented this. I would surely appreciate any info. thanks, Jignesh Gandhi -----Original Message----- From: Bogdan-Andrei IANCU [mailto:iancu@fokus.fraunhofer.de] Sent: Thursday, July 29, 2004 3:32 AM To: Gandhi, Jignesh Cc: 'serusers(a)lists.iptel.org' Subject: Re: [Serusers] re : re : redirect using external application. Gandhi, Jignesh wrote: > Hello, > > We have the following setup. A proxy forwarding all > the calls to our SER and the SER replies to the proxy > with the appropriate location where the call should be > routed (statless). So the first call could go to A and > the next call could go to C and so on. > > I want to be able to do some load balancing and smart > routing. By smart routing I mean that a program > running on the same box as the SER will keep track of > the health status of all the destination boxes like A, > B, C stated above. So when an invite comes from the > proxy, How can I call an external let's say "c" > program which will return the destination address the > SER should should return to the Proxy to use. > > I have looked at exec_dst but the admin guide provides > only exec_msg examples. I have a feeling that I could > use it, but not sure. indeed, the answer for you is exec_dst() - used for rewriting RURI. For a detailed description, take a look into README file in modules/exec. bogdan > > I hope that I explained the setup properly. If anyone > has any questions please ask. > > thanks in advance for your help. > Jignesh Gandhi > Software Engineer II > Jignesh.Gandhi(a)glenayre.com > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

19 years, 9 months

RE: [Serusers] Call Failed: 404 Not Found

by pi＠hostmates.com

Bogdan I tried this but when i write serctl ul add user sip:user@userip:5060 and check there is nothing in the database table location... > ----- Original Message ----- > From: "Bogdan-Andrei IANCU" <iancu(a)fokus.fraunhofer.de> > To: <pi(a)hostmates.com>; <serdev(a)lists.iptel.org> > Sent: Wednesday, July 28, 2004 5:54 PM > Subject: Re: [Serusers] Call Failed: 404 Not Found > > > pi(a)hostmates.com wrote: > > >I changed ser.cfg > > >listen=213.213.213.213 #myip > > >alias=mydomain.org > > > > > >Chaged the sip phone system properties using the ip not the domain and > > >serctl ul add stratsi sip:213.213.213.213:5060 > > >serctl ul add pi sip:213.213.213.213:5060 > > >Is that u mean ? > > > > ser.cfg is ok; the contact you inserted are wrong; serctl ul add is a > > test to replace the registration process - so, by "serctl ul add" you > > "register" a user with a contact (the ip of the user phone): > > serctl ul add user user_phone_contact > > so, replace in serctl cmd the contact: it shouldn't be the server ip, > > but the user's phone ip. > > > > bogdan > > > > > > __________ NOD32 1.578 (20031212) Information __________ > > > > This message was checked by NOD32 antivirus system. > > http://www.nod32.com

19 years, 9 months

[Serusers] tm.patch problem for cpl-c.so

by ser die

hello friends, i run the command pathc p0<modules/cpl-c/tm.patch so again i made a make , make all even though i did not find cpl-c.so so how to get that your help is highly appreciated with regards rama kanth __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

19 years, 9 months

[Serusers] how to use tm.patch

by ser die

hello friends, in order to produce cpl-c.so how do i need to use tbe tm.pacth your help will be appreciated with regards rama kanth __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail

19 years, 9 months

RE: [Serusers] Asterisks to ser to asterisk (voicemail)

by Dave Bath

Please see reply's inline... -----Original Message----- From: GR S [mailto:gr_sh2003@yahoo.com] Sent: 29 July 2004 02:01 To: Dave Bath Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] Asterisks to ser to asterisk (voicemail) Dave, --- Dave Bath <dave(a)fuuz.com> wrote: > Hey Girish, <snip> > Ser always pass it the format it's expecting... there must be way to do > a lookup(alias) and then re-write the URI with the alias before it gets > forwarded.? I am sorry. I haven't used 'aliases' and MSILO module. So my knowledge is very limited on using these features. We also have a setup somewhat similer to what you had described, but we have a plug-in for SER from which we fetch the records from the database, modify the uri and send it to Asterisk. This works fine for us and as you said, the ${EXTEN} in Asterisk dialplan handles all such numbers. Hmm... what do you mean about fetching from the database? I am using the mysql module and have the subscribers and aliases stored in the database... it sounds like I want to do exactly what you are doing - lookup the alias in the database and then modify the URI. Do you have any advice as to how you are doing this? > Sorry if my explanation about the 404 is confusing... it's confusing for > me too! Attached is the ser.cfg (I hope it retains the indentation!) > >From your ser.cfg: if ((method=="INVITE" || method=="ACK") && t_newtran() ) { t_reply("404", "Not Found"); I think this is why you get the 404 message failure route. Instead try this: if ((method == .... { t_on_failure("4"); t_relay(); break; } Thanks - I'll try this! Although I'll need to check to make sure that I still do cope with true 404 errors. Thanks for all the help, D > > Dave > Best Regards, ===== Girish Gopinath <gr_sh2003(a)yahoo.com> _______________________________ Do you Yahoo!? Express yourself with Y! Messenger! Free. Download now. http://messenger.yahoo.com

19 years, 9 months

[Serusers] if (uri==myself) always returns false?

by Jev

Hi all, This is no doubt one of those stupid little errors that I just can't spot, but I have spent too much time now, so I turn to the lists. I have a ser.cfg that works great on a FreeBSD box, now I have moved that config the a debian box. All software revisions (ser and rtpproxy) are the same. On the debian box the statement: if (uri==myself) always fails. I have checked that the hostname of the box resolves to the box correctly, and all the eth0 look sane. Something very basic is eluding me here but I just can see what. Tips? :) -Jev

19 years, 9 months

[Serusers] cpl using ser

by ser die

hello friends, my s/w configurations are o.s : redhat linux 9.0 ser : ser 0.8.12-tcp_nonb (i386/linux) i want to use cpl i try to include the cpl-c.so i checked in the /usr/local/lib/ser/modules/ but i could not get that so i try to make in the sip_router/modules/cpl-c/ it gives the error as ______________________________________________________ In file included from cpl_run.c:981: cpl_proxy.h: In function `failed_reply': cpl_proxy.h:167: structure has no member named `t_get_fake_req' In file included from cpl_run.c:981: cpl_proxy.h: In function `run_proxy': cpl_proxy.h:481: structure has no member named `register_req_cb' cpl_proxy.h:487: structure has no member named `register_req_cb' make: *** [cpl_run.o] Error 1 _______________________________________________________ so where am i going wrong with regards serdiehard __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

19 years, 9 months

← Newer
1
2
3
4
5
6
7
8
9
...
45
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2004