sr-users April 2004

sr-users@lists.kamailio.org

138 participants
266 discussions

by lakmal＠lankacom.net

I tried it as well. The GUI appears but when it tries to make a connection with it's sever looks like it hangs up... > I would not bet on it too much -- it does not seem to be actively > maintained and the last version I tried was not exactly meeting > my expectations. > > -jiri > > At 10:13 PM 4/23/2004, Sergio Diaz wrote: > >>Anybody work with SerAdmin (xten) last version and Ser 0.8.12 ? >> >>I try to install but not make to work.... >> >>Any Ideas ? >> >>Regards! >> >>-- >>Sergio DÃaz Escobar. CCNA >><sdiaz at comnet dot net dot mx> >>Network Engineer - Information Technology >>COMNET, S.A. DE C.V. >>Patriotismo 889 7o. Piso Col. Mixcoac >>Mexico, 039100, D.F. >>(52) 55 12539230 <> 121 Fax. (52) 55 12539240 >> >> >> >>Computers are unreliable, but humans are even more unreliable. >>Any system which depends on human reliability is unreliable. >> Murphy`s Law. >> >> >> >>___________________________________________________________________ >> >>This email may be confidential and/or privileged. Only the intended >>recipient may access or use it. Any dissemination, distribution or >>copying of this email is strictly prohibited. If you are not the >>intended recipient please notify us immediately by return email and >>then erase the email. >> >>We use virus scanning software but exclude all liability for viruses >>or similar in any attachment or message...,..,..,. >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers > > -- > Jiri Kuthan http://iptel.org/~jiri/ > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > Regards, Lakmal Lankacom Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel: +94-1-437545 www.lankacom.net

20 years

[Serusers] Re: SERWEB+SER

by Atle Samuelsen

I recomend using CVS for your config file, So you always can @hack@ on it, and see if you get stuff to work, if not.. just checkout the last working version :-) / Atle * gaillac harry <gaillacharry(a)yahoo.fr> [040423 15:04]: > I still agree you some examples for voicemail,msilo,... the problem is > to put these functions in ser.cfg in order to keep SER running. > > Le ven 23/04/2004 ?? 14:47, Atle Samuelsen a ??crit : > > I think there is a couple of working examples now.. my cfg file is per > > now running nothing. since my server is just used as a dumb proxy. > > > > -Atle > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040423 14:31]: > > > I agree you but could you send me back a ser.cfg file with missed calls, > > > send IM, voicemail capacities ? > > > > > > you would help me !! > > > > > > Harry > > > > > > Le ven 23/04/2004 ?? 07:53, Atle Samuelsen a ??crit : > > > > I'm not a developer myself.. but google is my friend :) > > > > I think alot of the questions you have adde here is alreaddy answerd > > > > before on the mailing-lists. > > > > > > > > > > > > -Atle > > > > > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040423 01:53]: > > > > > hello atle, > > > > > > > > > > I waste to much time with SER+SEMS+SERWEB I'm not a delopper, I've tried > > > > > my best to configure SER without a great success. > > > > > I'm about to look at Snom products. > > > > > > > > > > Many thanks all > > > > > Harry > > > > > > > > > > > > > > > Le jeu 22/04/2004 ?? 21:40, Atle Samuelsen a ??crit : > > > > > > www.google.com > > > > > > acc +mysql :host mail.iptel.org > > > > > > > > > > > > have'nt testet it.. but I know that you are not the first one who has > > > > > > had that problem. > > > > > > > > > > > > -atle > > > > > > > > > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040422 17:06]: > > > > > > > your're right > > > > > > > "DEFS+=-DSQL_ACC" in the modules/acc/Makefile. > > > > > > > Where Could I find that information? > > > > > > > Regards > > > > > > > > > > > > > > Le jeu 22/04/2004 ?? 16:45, Atle Samuelsen a ??crit : > > > > > > > > If I dont rember TOO wrong, I think there is a option you have forgot'n > > > > > > > > in the Makefile for the acc.module that says if it uses a database or > > > > > > > > not. > > > > > > > > > > > > > > > > > > > > > > > > - Atle > > > > > > > > > > > > > > > > > > > > > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040422 16:29]: > > > > > > > > > Here is my ser.cfg.SER don't start because of acc module > > > > > > > > > anybody could help me to solved this problem before an other ? > > > > > > > > > > > > > > > > > > ser -c => > > > > > > > > > 0(6238) set_mod_param_regex: parameter <db_url> not found in module > > > > > > > > > <acc> > > > > > > > > > 0(6238) parse error (96,60-61): Can't set module parameter > > > > > > > > > 0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in > > > > > > > > > module <acc> > > > > > > > > > 0(6238) parse error (97,36-37): Can't set module parameter > > > > > > > > > 0(6238) parse error (195,63-64): unknown command, missing loadmodule? > > > > > > > > > > > > > > > > > > ERROR: bad config file (3 errors) > > > > > > > > > > > > > > > > > > regards > > > > > > > > > > > > > > > > > > > > > > > > > > > # > > > > > > > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > > > > > > > > > # > > > > > > > > > # simple quick-start config script > > > > > > > > > # > > > > > > > > > > > > > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > > > > > > > > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > > > > > > > #fork=yes > > > > > > > > > #log_stderror=no # (cmd line: -E) > > > > > > > > > > > > > > > > > > /* Uncomment these lines to enter debugging mode > > > > > > > > > debug=9 > > > > > > > > > fork=yes > > > > > > > > > log_stderror=yes > > > > > > > > > */ > > > > > > > > > > > > > > > > > > check_via=no # (cmd. line: -v) > > > > > > > > > dns=no # (cmd. line: -r) > > > > > > > > > rev_dns=no # (cmd. line: -R) > > > > > > > > > port=5060 > > > > > > > > > listen=192.168.0.1 > > > > > > > > > children=4 > > > > > > > > > fifo="/tmp/ser_fifo" > > > > > > > > > fifo_mode=0666 > > > > > > > > > #alias="example.com" > > > > > > > > > # ------------------ module:wq loading > > > > > > > > > ---------------------------------- > > > > > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > > > > > > > > > > > > > > > > loadmodule "/usr/lib/ser/modules/sl.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/domain.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/msilo.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/vm.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/acc.so" > > > > > > > > > > > > > > > > > > # Uncomment this if you want digest authentication > > > > > > > > > # mysql.so must be loaded ! > > > > > > > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > > > > > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > > > > > > > > > > > > > # ----------------- setting module-specific parameters --------------- > > > > > > > > > > > > > > > > > > # -- usrloc params -- > > > > > > > > > > > > > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > > > # for persistent storage and comment the previous line > > > > > > > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > modparam("usrloc", "db_mode", 1) > > > > > > > > > #modparam("usrloc", "use_domain", 1) > > > > > > > > > > > > > > > > > > # --register params-- > > > > > > > > > modparam("registrar", "use_domain", 1) > > > > > > > > > > > > > > > > > > # -- auth params -- > > > > > > > > > # Uncomment if you are using auth module > > > > > > > > > # > > > > > > > > > modparam("auth_db", "calculate_ha1", yes) > > > > > > > > > # > > > > > > > > > # If you set "calculate_ha1" parameter to yes (which true in this > > > > > > > > > config), > > > > > > > > > # uncomment also the following parameter) > > > > > > > > > # > > > > > > > > > modparam("auth_db", "password_column", "password") > > > > > > > > > > > > > > > > > > # -- rr params -- > > > > > > > > > # add value to ;lr param to make some broken UAs happy > > > > > > > > > modparam("rr", "enable_full_lr", 1) > > > > > > > > > > > > > > > > > > # --domain module-- > > > > > > > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > modparam("domain", "db_mode", 1) > > > > > > > > > modparam("domain", "domain_table", "domain") > > > > > > > > > modparam("domain", "domain_col", "domain") > > > > > > > > > > > > > > > > > > # --msilo params-- > > > > > > > > > modparam("msilo", "registrar", "sip:registrar@example.com") > > > > > > > > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > > > > > > > > > > # --vm params-- > > > > > > > > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > > > > > > > > > > # --acc params-- > > > > > > > > > modparam("acc", "log_level", 1) > > > > > > > > > modparam("acc", "log_flag", 2) > > > > > > > > > modparam("acc", "log_missed_flag", 2) > > > > > > > > > modparam("acc", "log_fmt", "fimos") > > > > > > > > > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > modparam("acc", "db_missed_flag", 2) > > > > > > > > > > > > > > > > > > # ------------------------- request routing logic ------------------- > > > > > > > > > > > > > > > > > > # main routing logic > > > > > > > > > > > > > > > > > > route{ > > > > > > > > > > > > > > > > > > # initial sanity checks -- messages with > > > > > > > > > # max_forwards==0, or excessively long requests > > > > > > > > > if (!mf_process_maxfwd_header("10")) { > > > > > > > > > sl_send_reply("483","Too Many Hops"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > if ( msg:len > max_len ) { > > > > > > > > > sl_send_reply("513", "Message too big"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > # we record-route all messages -- to make sure that > > > > > > > > > # subsequent messages will go through our proxy; that's > > > > > > > > > # particularly good if upstream and downstream entities > > > > > > > > > # use different transport protocol > > > > > > > > > record_route(); > > > > > > > > > # loose-route processing > > > > > > > > > if (loose_route()) { > > > > > > > > > t_relay(); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > # if the request is for other domain use UsrLoc > > > > > > > > > # (in case, it does not work, use the following command > > > > > > > > > # with proper names and addresses in it) > > > > > > > > > if (is_from_local()) { > > > > > > > > > > > > > > > > > > if (method=="REGISTER") { > > > > > > > > > > > > > > > > > > # Uncomment this if you want to use digest authentication > > > > > > > > > if (!www_authorize("", "subscriber")) { > > > > > > > > > www_challenge("", "0"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > save("location"); > > > > > > > > > m_dump(); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > # native SIP destinations are handled using our USRLOC DB > > > > > > > > > lookup("aliases"); > > > > > > > > > if (!lookup("location")) { > > > > > > > > > > > > > > > > > > if (method == "MESSAGE") { > > > > > > > > > if (!t_newtran()) { > > > > > > > > > sl_reply_error(); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > if (m_store("0")) { > > > > > > > > > t_reply("202", "Accepted for Later Delivery"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > t_reply("503", "Service Unavailable"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > if ((method=="INVITE" || method=="ACK") && t_newtran() ) { > > > > > > > > > t_reply("404", "Not Found"); > > > > > > > > > route(3); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > setflag(2); > > > > > > > > > # forward to current uri now; use stateful forwarding; that > > > > > > > > > # works reliably even if we forward from TCP to UDP > > > > > > > > > t_on_failure("1"); > > > > > > > > > # forward to current uri now; use stateful forwarding; that > > > > > > > > > # works reliably even if we forward from TCP to UDP > > > > > > > > > if (!t_relay()) { > > > > > > > > > sl_reply_error(); > > > > > > > > > }; > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > route[3] { > > > > > > > > > > > > > > > > > > # non-Voip -- just send "off-line" > > > > > > > > > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { > > > > > > > > > sl_send_reply("404", "Not Found"); > > > > > > > > > break; > > > > > > > > > }; > > > > > > > > > if (t_newtran()) { > > > > > > > > > t_reply("404", "Not Found"); > > > > > > > > > acc_db_request("404 missed call", "missed_calls"); > > > > > > > > > > > > > > > > > > }; > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

20 years

Re: [Serusers] SIP <-> H.323

by Gregory Sandul

Hi all, It is expected to be cisco solution for sip<->H.323 in 2004 http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_qanda_item09… Arnd, could you explain, why you think sipquest.com sucks? Thanks. Esteban D. Benavides wrote: > I'm looking for a gateway for SER to translate and work between SIP and > H.323. Is there any software for this... No Open-Source solution available except Asterisk. It is said that asterisk would be capable of this but i havent seen it at work or any example config. Dont try "sipquest.com" products cause the company IMO sucks. If you only need H323 -> sip-proxy -> sipua communication you can use siph323csgw which is part of Vovidas "Vocal" distribution. You cant use siph323csgw for for SIP <> H323 GK/GW communications. best regards, :: Arnd :: _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25� http://photos.yahoo.com/ph/print_splash

20 years

[Serusers] TRABAS ----> SER

by Humberto Atristain

20 years

[Serusers] Re: SERWEB+SER

by Atle Samuelsen

www.google.com acc +mysql :host mail.iptel.org have'nt testet it.. but I know that you are not the first one who has had that problem. -atle * gaillac harry <gaillacharry(a)yahoo.fr> [040422 17:06]: > your're right > "DEFS+=-DSQL_ACC" in the modules/acc/Makefile. > Where Could I find that information? > Regards > > Le jeu 22/04/2004 ?? 16:45, Atle Samuelsen a ??crit : > > If I dont rember TOO wrong, I think there is a option you have forgot'n > > in the Makefile for the acc.module that says if it uses a database or > > not. > > > > > > - Atle > > > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040422 16:29]: > > > Here is my ser.cfg.SER don't start because of acc module > > > anybody could help me to solved this problem before an other ? > > > > > > ser -c => > > > 0(6238) set_mod_param_regex: parameter <db_url> not found in module > > > <acc> > > > 0(6238) parse error (96,60-61): Can't set module parameter > > > 0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in > > > module <acc> > > > 0(6238) parse error (97,36-37): Can't set module parameter > > > 0(6238) parse error (195,63-64): unknown command, missing loadmodule? > > > > > > ERROR: bad config file (3 errors) > > > > > > regards > > > > > > > > > # > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > > > # > > > # simple quick-start config script > > > # > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > #fork=yes > > > #log_stderror=no # (cmd line: -E) > > > > > > /* Uncomment these lines to enter debugging mode > > > debug=9 > > > fork=yes > > > log_stderror=yes > > > */ > > > > > > check_via=no # (cmd. line: -v) > > > dns=no # (cmd. line: -r) > > > rev_dns=no # (cmd. line: -R) > > > port=5060 > > > listen=192.168.0.1 > > > children=4 > > > fifo="/tmp/ser_fifo" > > > fifo_mode=0666 > > > #alias="example.com" > > > # ------------------ module:wq loading > > > ---------------------------------- > > > > > > # Uncomment this if you want to use SQL database > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > > > > loadmodule "/usr/lib/ser/modules/sl.so" > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > loadmodule "/usr/lib/ser/modules/domain.so" > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > loadmodule "/usr/lib/ser/modules/msilo.so" > > > loadmodule "/usr/lib/ser/modules/vm.so" > > > loadmodule "/usr/lib/ser/modules/acc.so" > > > > > > # Uncomment this if you want digest authentication > > > # mysql.so must be loaded ! > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > # ----------------- setting module-specific parameters --------------- > > > > > > # -- usrloc params -- > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > # Uncomment this if you want to use SQL database > > > # for persistent storage and comment the previous line > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("usrloc", "db_mode", 1) > > > #modparam("usrloc", "use_domain", 1) > > > > > > # --register params-- > > > modparam("registrar", "use_domain", 1) > > > > > > # -- auth params -- > > > # Uncomment if you are using auth module > > > # > > > modparam("auth_db", "calculate_ha1", yes) > > > # > > > # If you set "calculate_ha1" parameter to yes (which true in this > > > config), > > > # uncomment also the following parameter) > > > # > > > modparam("auth_db", "password_column", "password") > > > > > > # -- rr params -- > > > # add value to ;lr param to make some broken UAs happy > > > modparam("rr", "enable_full_lr", 1) > > > > > > # --domain module-- > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("domain", "db_mode", 1) > > > modparam("domain", "domain_table", "domain") > > > modparam("domain", "domain_col", "domain") > > > > > > # --msilo params-- > > > modparam("msilo", "registrar", "sip:registrar@example.com") > > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > # --vm params-- > > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > # --acc params-- > > > modparam("acc", "log_level", 1) > > > modparam("acc", "log_flag", 2) > > > modparam("acc", "log_missed_flag", 2) > > > modparam("acc", "log_fmt", "fimos") > > > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("acc", "db_missed_flag", 2) > > > > > > # ------------------------- request routing logic ------------------- > > > > > > # main routing logic > > > > > > route{ > > > > > > # initial sanity checks -- messages with > > > # max_forwards==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > break; > > > }; > > > if ( msg:len > max_len ) { > > > sl_send_reply("513", "Message too big"); > > > break; > > > }; > > > > > > # we record-route all messages -- to make sure that > > > # subsequent messages will go through our proxy; that's > > > # particularly good if upstream and downstream entities > > > # use different transport protocol > > > record_route(); > > > # loose-route processing > > > if (loose_route()) { > > > t_relay(); > > > break; > > > }; > > > > > > # if the request is for other domain use UsrLoc > > > # (in case, it does not work, use the following command > > > # with proper names and addresses in it) > > > if (is_from_local()) { > > > > > > if (method=="REGISTER") { > > > > > > # Uncomment this if you want to use digest authentication > > > if (!www_authorize("", "subscriber")) { > > > www_challenge("", "0"); > > > break; > > > }; > > > > > > save("location"); > > > m_dump(); > > > break; > > > }; > > > > > > # native SIP destinations are handled using our USRLOC DB > > > lookup("aliases"); > > > if (!lookup("location")) { > > > > > > if (method == "MESSAGE") { > > > if (!t_newtran()) { > > > sl_reply_error(); > > > break; > > > }; > > > > > > if (m_store("0")) { > > > t_reply("202", "Accepted for Later Delivery"); > > > break; > > > }; > > > > > > t_reply("503", "Service Unavailable"); > > > break; > > > }; > > > }; > > > > > > if ((method=="INVITE" || method=="ACK") && t_newtran() ) { > > > t_reply("404", "Not Found"); > > > route(3); > > > break; > > > }; > > > > > > }; > > > > > > setflag(2); > > > # forward to current uri now; use stateful forwarding; that > > > # works reliably even if we forward from TCP to UDP > > > t_on_failure("1"); > > > # forward to current uri now; use stateful forwarding; that > > > # works reliably even if we forward from TCP to UDP > > > if (!t_relay()) { > > > sl_reply_error(); > > > }; > > > > > > } > > > > > > > > > route[3] { > > > > > > # non-Voip -- just send "off-line" > > > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { > > > sl_send_reply("404", "Not Found"); > > > break; > > > }; > > > if (t_newtran()) { > > > t_reply("404", "Not Found"); > > > acc_db_request("404 missed call", "missed_calls"); > > > > > > }; > > > } > > > > > > > > > > >

20 years

[Serusers] Audio Problem

by GR S

Hi all, I started using SER a few weeks back. It's working pretty good, but i am having some issues with audio. This is the scenario: softphone <-> NAT <-> SER/Public IP <-> NAT <-> softphone I have a softphone in our local network trying to call another softphone in another network. This works perfectly, I am having no issues. But when I try to call a softphone in the same local network, the connection establishes, softphone says audio active, but there is no sound. I think this is because of NAT, but how can i make it work for phones connected in the same network? Can anyone help me in figuring out the problem, or any pointers or links from where i can find some useful information? Any help on this regard would be greately appreciated. Regards, Girish __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25� http://photos.yahoo.com/ph/print_splash

20 years

[Serusers] Re: [Sems] current cvs ser version and isdngw

by Ulrich Abend

Yes, it would be good if you captured all the SIP messages and send a error description to serusers(a)lists.iptel.org. I am afraid, this is not really a isdngw problem, but more a SER routing problem. Uli. On Friday 23 April 2004 13:06, Ulrich Holeschak wrote: > Hello again, > would it help if i create an log file with etherreal? I expect it's getting > very big, but it contains more information. I expect, that i can only log > on the windows side, so if there are telegrams going to the wrong > destionation you can't see them ... > > Ulrich > > -----Ursprüngliche Nachricht----- > Von: "Ulrich Abend" <ullstar(a)iptel.org> > An: "Ulrich Holeschak" <ulrich(a)holeschak.de> > Gesendet: Freitag, 23. April 2004 11:57 > Betreff: Re: [Sems] current cvs ser version and isdngw > > > Hi Ulrich, > > > > sorry for asking for the logfiles again, my hosting provider delayed your > > mail > > > from 14:01. I received it yesterday at 23:00 :-(( > > > > Anyway, now after I reviewed the complete log files, I still cannot find > > a reason for the strange behaviour. > > > > Please tell me again, what exactly happens, from your last log files I > > see, > > > that the connection is established for ~30sec. What causes your Messenger > > to > > > send BYE then? > > > > Apr 22 23:24:46 router ser[29099]: method: <BYE> > > > > Do you manually stop the connection? Is Audio working allright while the > > 30sec? > > > > What version of Messenger do you use? There have been some problems with > > the > > > standards compliance (esp. version 5.0, recommended version is 4.7)... > > Do you have any other SIP client, you could use for testing? E.g. kphone? > > > > Uli. > >

20 years

Re[2]: [Serusers] SER + Asterisk

by Alessio Focardi

Hello Laurent, Tuesday, April 20, 2004, 6:21:07 PM, you wrote: LB> I think i follow the instructions ... but should i "route" ( so modify LB> the ser.cfg file) some messages to my gateway to use the answering LB> machine or services provided by my gateway ... LB> And what about autocreatepeer=yes? surely later you will have to route in ser.cfg for outbound calls, checking first for user auth and grp assignement. Using the extention method you can direct sip addresses to services in asterisk like voicemail or voice prompts. that's my ser routing for outside calls record_route(); if (uri=~"sip:0[0-9]+@"){ if (!proxy_authorize("mydomain.com", "subscriber")) {proxy_challenge("mydomain.com", "0");sl_send_reply("403", "That's not your home");break;}; #fine proxy challenge if (!is_user_in("credentials", "local")){sl_send_reply("403", "No permission for local calls");break;}; #fine invite rewritehostport("sip.mydomain.com:5090"); t_relay(); break; }; #fine if uri sip:0 inside asterisk calls forwarded by ser are treated by this extention exten => _0.,1,Dial,Zap/g1/${EXTEN:1}|45|r exten => _0.,2,Congestion its important to notice that you have to block port 5090 for incoming ip requests .... Only ser will be allowed to talk to asterisk and forward calls, after user checking. Hope it helps LB> thx LB> Alessio Focardi wrote: >>Hello Laurent, >> >>Tuesday, April 20, 2004, 4:45:41 PM, you wrote: >> >>LB> But my clients should register on SER or on Asterisk? >> >>On ser, then you will need to protect asterisk from unallowed pstn >>call, but that will come later on. >> >> >>LB> thx >> >>LB> Alessio Focardi wrote: >> >> >> >>>>Hello Laurent, >>>> >>>>Tuesday, April 20, 2004, 1:50:37 PM, you wrote: >>>> >>>>LB> In fact, my ser installation works fine... >>>>LB> I can pass call through asterisk in standalone... >>>>LB> The problem is to interconnect the 2, to register ( i don't know if it's >>>>LB> a right solution) the sipphones on SER and to go outside thanks to >>>>LB> asterisk... >>>> >>>>make asterisk use port 5090 for sip, then as a first step make >>>>asterisk register in ser as an extention. >>>> >>>>you can do this in asterisk's sip.conf >>>> >>>>example >>>> >>>>register => 10:password@sip.yourdomanin.com/10 >>>> >>>>this tells asterisk to register extention 10 as address 109(a)yourdomain.com >>>> >>>>dial 10 with a sip phone and you are in asterisk ... note that you >>>>should have an extention 10 defined, or it will not work. >>>> >>>>B> Thx >>>> >>>>LB> Alessio Focardi wrote: >>>> >>>> >>>> >>>> >>>> >>>>>>Hello Laurent, >>>>>> >>>>>>What you want to accomplish could be done, my advice is to setup a >>>>>>working installation of ser then you will continue with asterisk. >>>>>> >>>>>>At first make a simple installation of ser (no auth, no db maybe) and make >>>>>>your phones call each other. >>>>>> >>>>>>If you encounter specific problems and you want to have some help this >>>>>>is the right place. >>>>>> >>>>>>Good luck ! >>>>>> >>>>>> >>>>>> >>>>>>Tuesday, April 20, 2004, 1:29:41 PM, you wrote: >>>>>> >>>>>>LB> Hi, >>>>>>LB> I want to use SER as a sip Proxy and asterisk as a gateway to the PSTN >>>>>>LB> network ... >>>>>>LB> My sipphones are BudgetTone101 and i'm having trouble trying configure >>>>>>LB> them.... >>>>>>LB> Indeed, i don't know if they should register on SER or not... I don't >>>>>>LB> know what kind of sip messages should be passed to my machine running >>>>>>LB> asterisk. >>>>>>LB> I don't know what must be in ser.cfg ( if you've an example it could >>>>>>LB> help me a lot...)... >>>>>>LB> I wasn't able to find documentations about using Ser and Asterisk in >>>>>>LB> this configuration ( messages in the archives are not explicit >>>>>>LB> enough....) , so if you've a pointer or so.... >>>>>> >>>>>> >>>>>>LB> Help... >>>>>> >>>>>>LB> thx, >>>>>>LB> Laurent >>>>>> >>>>>>LB> _______________________________________________ >>>>>>LB> Serusers mailing list >>>>>>LB> serusers(a)lists.iptel.org >>>>>>LB> http://lists.iptel.org/mailman/listinfo/serusers >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>LB> _______________________________________________ >>>>LB> Serusers mailing list >>>>LB> serusers(a)lists.iptel.org >>>>LB> http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>>> >>>> >>>> >>>> >>>> >> >> >> >> >> -- Best regards, Alessio mailto:afoc@interconnessioni.it

20 years

[Serusers] Fwd: SIP Client g723.1

by Ulrich Abend

Hi, does anyone have a hint for a good windows software for Marcello including the g723.1 codec? Thanks, Uli. ----- Weitergeleitete Nachricht von Marcello Lupo <lupo(a)itspecialist.it> ----- Datum: Wed, 21 Apr 2004 23:46:35 +0200 Von: Marcello Lupo <lupo(a)itspecialist.it> Antwort an: Marcello Lupo <lupo(a)itspecialist.it> Betreff: SIP Client g723.1 An: ullstar(a)iptel.org Hi Ulrich, i hope you remember me... I hope all is good with you. We are using very happily your SER in our offices in production environment right now. Thanks a lot for all you past help. I have a question, do you know any very good client SIP Phone software running on Windows that support the G723.1 codec?? I think that it will be almost sure a commercial product but it doesn't matter. Thank you again, Bye, MArcello ----- Ende der weitergeleiteten Nachricht ----- ---------------------------------------------------------------- Diese Mail wurde über das ADM Internet Mailsystem verschickt.

20 years

[Serusers] compiling the stable rtpproxy

by Peter Boot

Is the latest stable version of the the rtpproxy still v20040105 ? I am struggling to compile it on RedHat 9 with make-3.79.1-17 I downloaded sorce files using cvs co -r v20040105 rtpproxy when I use the make install command the following error message is returned. "Makefile:33: *** missing separator. Stop. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.661 / Virus Database: 424 - Release Date: 4/19/2004

20 years

← Newer
1
...
6
7
8
9
10
11
12
...
27
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2004