sr-users April 2004

sr-users@lists.kamailio.org

138 participants
266 discussions

[Serusers] SER+SERWEB
by gaillac harry 22 Apr '04

22 Apr '04

hi all, Here is my ser.cfg. I try to use send IM, missed calls and voicemail but i can't debug my ser.cfg problems with route[2] and acc module in my ser.cfg. Anybody could help me to understand ? # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 listen=192.168.0.1 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 #alias="example.com" # ------------------ module:wq loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/acc.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/vm.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 1) #modparam("usrloc", "use_domain", 1) # --register params-- modparam("registrar", "use_domain", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # --domain module-- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") # --msilo params-- modparam("msilo", "registrar", "sip:registrar@example.com") modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") # --vm params-- modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") # --acc params-- #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "db_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); m_dump(); break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (method == "MESSAGE") { route(2); break; }; if ((method=="INVITE" || method=="ACK") && t_newtran() ) { t_reply("404", "Not Found"); route(3); break; }; }; setflag(3); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP t_on_failure("1"); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #route[2] { if (method == "MESSAGE") { if (!t_newtran()) { sl_reply_error(); break; }; if (m_store("0")) { t_reply("202", "Accepted for Later Delivery"); break; }; }; } route[3] { # non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { sl_send_reply("404", "Not Found"); break; }; if (t_newtran()) { t_reply("404", "Not Found"); # acc_db_request("404 missed call", "missed_calls"); }; }

3 2

Re: [Serusers] SER+SERWEB
by Atle Samuelsen 22 Apr '04

22 Apr '04

Uncommit it. and tail /var/log/messages and see what it complaints about.. -Atle * gaillac harry <gaillacharry(a)yahoo.fr> [040422 15:19]: > Hi, > > I agree you but if i uncomment this line SER don't start ??? > do you know configuring missed calls see route[3]? > Regards > > Le jeu 22/04/2004 ?? 15:09, Atle Samuelsen a ??crit : > > #route[2] { should be route[2] { > > > > - Atle (I have'nt tested your config, so if there are any other faults > > in it I dont know) > > > > * gaillac harry <gaillacharry(a)yahoo.fr> [040422 14:00]: > > > hi all, > > > > > > Here is my ser.cfg. I try to use send IM, missed calls and voicemail > > > but i can't debug my ser.cfg > > > > > > problems with route[2] and acc module in my ser.cfg. > > > > > > > > > Anybody could help me to understand ? > > > > > > # > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > > > # > > > # simple quick-start config script > > > # > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > #fork=yes > > > #log_stderror=no # (cmd line: -E) > > > > > > /* Uncomment these lines to enter debugging mode > > > debug=9 > > > fork=yes > > > log_stderror=yes > > > */ > > > > > > check_via=no # (cmd. line: -v) > > > dns=no # (cmd. line: -r) > > > rev_dns=no # (cmd. line: -R) > > > port=5060 > > > listen=192.168.0.1 > > > children=4 > > > fifo="/tmp/ser_fifo" > > > fifo_mode=0666 > > > #alias="example.com" > > > # ------------------ module:wq loading > > > ---------------------------------- > > > > > > # Uncomment this if you want to use SQL database > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > > > > loadmodule "/usr/lib/ser/modules/sl.so" > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > loadmodule "/usr/lib/ser/modules/acc.so" > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > loadmodule "/usr/lib/ser/modules/domain.so" > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > loadmodule "/usr/lib/ser/modules/msilo.so" > > > loadmodule "/usr/lib/ser/modules/vm.so" > > > > > > # Uncomment this if you want digest authentication > > > # mysql.so must be loaded ! > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > # ----------------- setting module-specific parameters --------------- > > > > > > # -- usrloc params -- > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > # Uncomment this if you want to use SQL database > > > # for persistent storage and comment the previous line > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("usrloc", "db_mode", 1) > > > #modparam("usrloc", "use_domain", 1) > > > > > > # --register params-- > > > modparam("registrar", "use_domain", 1) > > > > > > # -- auth params -- > > > # Uncomment if you are using auth module > > > # > > > modparam("auth_db", "calculate_ha1", yes) > > > # > > > # If you set "calculate_ha1" parameter to yes (which true in this > > > config), > > > # uncomment also the following parameter) > > > # > > > modparam("auth_db", "password_column", "password") > > > > > > # -- rr params -- > > > # add value to ;lr param to make some broken UAs happy > > > modparam("rr", "enable_full_lr", 1) > > > > > > # --domain module-- > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("domain", "db_mode", 1) > > > modparam("domain", "domain_table", "domain") > > > modparam("domain", "domain_col", "domain") > > > > > > # --msilo params-- > > > modparam("msilo", "registrar", "sip:registrar@example.com") > > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > # --vm params-- > > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > # --acc params-- > > > #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > > > #modparam("acc", "db_missed_flag", 3) > > > > > > # ------------------------- request routing logic ------------------- > > > > > > # main routing logic > > > > > > route{ > > > > > > # initial sanity checks -- messages with > > > # max_forwards==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > break; > > > }; > > > if ( msg:len > max_len ) { > > > sl_send_reply("513", "Message too big"); > > > break; > > > }; > > > > > > # we record-route all messages -- to make sure that > > > # subsequent messages will go through our proxy; that's > > > # particularly good if upstream and downstream entities > > > # use different transport protocol > > > record_route(); > > > # loose-route processing > > > if (loose_route()) { > > > t_relay(); > > > break; > > > }; > > > > > > # if the request is for other domain use UsrLoc > > > # (in case, it does not work, use the following command > > > # with proper names and addresses in it) > > > if (is_from_local()) { > > > > > > if (method=="REGISTER") { > > > > > > # Uncomment this if you want to use digest authentication > > > if (!www_authorize("", "subscriber")) { > > > www_challenge("", "0"); > > > break; > > > }; > > > > > > save("location"); > > > m_dump(); > > > break; > > > }; > > > > > > # native SIP destinations are handled using our USRLOC DB > > > lookup("aliases"); > > > if (!lookup("location")) { > > > > > > if (method == "MESSAGE") { > > > route(2); > > > break; > > > }; > > > > > > if ((method=="INVITE" || method=="ACK") && t_newtran() ) { > > > t_reply("404", "Not Found"); > > > route(3); > > > break; > > > }; > > > > > > }; > > > > > > setflag(3); > > > # forward to current uri now; use stateful forwarding; that > > > # works reliably even if we forward from TCP to UDP > > > t_on_failure("1"); > > > # forward to current uri now; use stateful forwarding; that > > > # works reliably even if we forward from TCP to UDP > > > if (!t_relay()) { > > > sl_reply_error(); > > > }; > > > > > > } > > > > > > #route[2] { > > > if (method == "MESSAGE") { > > > if (!t_newtran()) { > > > sl_reply_error(); > > > break; > > > }; > > > > > > if (m_store("0")) { > > > t_reply("202", "Accepted for Later Delivery"); > > > break; > > > }; > > > }; > > > } > > > > > > route[3] { > > > > > > # non-Voip -- just send "off-line" > > > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { > > > sl_send_reply("404", "Not Found"); > > > break; > > > }; > > > if (t_newtran()) { > > > t_reply("404", "Not Found"); > > > # acc_db_request("404 missed call", "missed_calls"); > > > > > > }; > > > } > > > > > > > > # > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > > > # > > > # simple quick-start config script > > > # > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > #fork=yes > > > #log_stderror=no # (cmd line: -E) > > > > > > /* Uncomment these lines to enter debugging mode > > > debug=9 > > > fork=yes > > > log_stderror=yes > > > */ > > > > > > check_via=no # (cmd. line: -v) > > > dns=no # (cmd. line: -r) > > > rev_dns=no # (cmd. line: -R) > > > port=5060 > > > listen=192.168.0.1 > > > children=4 > > > fifo="/tmp/ser_fifo" > > > fifo_mode=0666 > > > #alias="example.com" > > > # ------------------ module:wq loading ---------------------------------- > > > > > > # Uncomment this if you want to use SQL database > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > > > > loadmodule "/usr/lib/ser/modules/sl.so" > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > loadmodule "/usr/lib/ser/modules/acc.so" > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > loadmodule "/usr/lib/ser/modules/domain.so" > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > loadmodule "/usr/lib/ser/modules/msilo.so" > > > loadmodule "/usr/lib/ser/modules/vm.so" > > > > > > # Uncomment this if you want digest authentication > > > # mysql.so must be loaded ! > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > # ----------------- setting module-specific parameters --------------- > > > > > > # -- usrloc params -- > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > # Uncomment this if you want to use SQL database > > > # for persistent storage and comment the previous line > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("usrloc", "db_mode", 1) > > > #modparam("usrloc", "use_domain", 1) > > > > > > # --register params-- > > > modparam("registrar", "use_domain", 1) > > > > > > # -- auth params -- > > > # Uncomment if you are using auth module > > > # > > > modparam("auth_db", "calculate_ha1", yes) > > > # > > > # If you set "calculate_ha1" parameter to yes (which true in this config), > > > # uncomment also the following parameter) > > > # > > > modparam("auth_db", "password_column", "password") > > > > > > # -- rr params -- > > > # add value to ;lr param to make some broken UAs happy > > > modparam("rr", "enable_full_lr", 1) > > > > > > # --domain module-- > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > modparam("domain", "db_mode", 1) > > > modparam("domain", "domain_table", "domain") > > > modparam("domain", "domain_col", "domain") > > > > > > # --msilo params-- > > > modparam("msilo", "registrar", "sip:registrar@example.com") > > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > # --vm params-- > > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > # --acc params-- > > > #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > > > #modparam("acc", "db_missed_flag", 3) > > > > > > # ------------------------- request routing logic ------------------- > > > > > > # main routing logic > > > > > > route{ > > > > > > # initial sanity checks -- messages with > > > # max_forwards==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > break; > > > }; > > > if ( msg:len > max_len ) { > > > sl_send_reply("513", "Message too big"); > > > break; > > > }; > > > > > > # we record-route all messages -- to make sure that > > > # subsequent messages will go through our proxy; that's > > > # particularly good if upstream and downstream entities > > > # use different transport protocol > > > record_route(); > > > # loose-route processing > > > if (loose_route()) { > > > t_relay(); > > > break; > > > }; > > > > > > # if the request is for other domain use UsrLoc > > > # (in case, it does not work, use the following command > > > # with proper names and addresses in it) > > > if (is_from_local()) { > > > > > > if (method=="REGISTER") { > > > > > > # Uncomment this if you want to use digest authentication > > > if (!www_authorize("", "subscriber")) { > > > www_challenge("", "0"); > > > break; > > > }; > > > > > > save("location"); > > > m_dump(); > > > break; > > > }; > > > > > > # native SIP destinations are handled using our USRLOC DB > > > lookup("aliases"); > > > if (!lookup("location")) { > > > > > > if (method == "MESSAGE") { > > > route(2); > > > break; > > > }; > > > > > > if ((method=="INVITE" || method=="ACK") && t_newtran() ) { > > > t_reply("404", "Not Found"); > > > route(3); > > > break; > > > }; > > > > > > }; > > > > > > setflag(3); > > > # forward to current uri now; use stateful forwarding; that > > > # works reliably even if we forward from TCP to UDP > > > t_on_failure("1"); > > > # forward to current uri now; use stateful forwarding; that > > > # works reliably even if we forward from TCP to UDP > > > if (!t_relay()) { > > > sl_reply_error(); > > > }; > > > > > > } > > > > > > route[2] { > > > if (method == "MESSAGE") { > > > if (!t_newtran()) { > > > sl_reply_error(); > > > break; > > > }; > > > > > > if (m_store("0")) { > > > t_reply("202", "Accepted for Later Delivery"); > > > break; > > > }; > > > }; > > > } > > > > > > route[3] { > > > > > > # non-Voip -- just send "off-line" > > > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { > > > sl_send_reply("404", "Not Found"); > > > break; > > > }; > > > if (t_newtran()) { > > > t_reply("404", "Not Found"); > > > # acc_db_request("404 missed call", "missed_calls"); > > > > > > }; > > > } > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > >

1 0

[Serusers] ser b2bua config question
by a.pletli＠euromacc.hu 22 Apr '04

22 Apr '04

Hello! Plese help me, if possible! I have a SER server and Vocal b2bua on my linux server. I would like make a simple prepaid application whith these components. I'm beginner in SIP, therefore excuse me for stupid questions. SER works fine without b2bua, sends accounting messages to the freeradius server, but can't hang up conversation depend on user balance amount. Therefore i need a b2ua, that watches the sessions, and starts a timer (vocal 2b2ua be able to do it ) How works b2bua in this plan? Need i one b2bua between two SER servers for calltime controll? Are there any other simple free solutions for prepaid billing with SER? Is there anyone who use b2bua with SER server? If yes, please send a configuration hint for me! Thank you. Regards, Antal Pletli email: a.pletli(a)euromacc.hu

1 0

[Serusers] Read and Get Value from SER database
by Shirley 22 Apr '04

22 Apr '04

Hi, Please kindly help.Anyone know how to read and use the values from the database to do forwarding when user is not online in the SER.CFG file. I want to read from the subscriber table to get a new value for the rewriteuser(""). Please HELP!!! Thank you.... Regards, Shirley

1 0

[Serusers] Multiple Invites
by Kapil Dhawan 22 Apr '04

22 Apr '04

Hi All My phone hardware is sending Multiple Invites....Don't know why its not matching the ACK sent from the server...... Pls suggest me something which can be done at server end to rectify it as i can't do it with phone..... _________________________________________________________________ Pay Cash on delivery of products. http://go.msnserver.com/IN/47509.asp Free Registration on Baazee.com

3 2

[Serusers] Check config
by Alan Litster 22 Apr '04

22 Apr '04

Hi, Is it possible to get SER to check the routing script for errors before you restart SER? At the minute if there's errors in the script, when SER is restarted it fails it start again. It would be nice to be able to get it to run a syntax check. Regards, Alan ------------------------------------------------------------------------------------------------------- This email, and any files transmitted with it, is copyright and may contain confidential information. The contents are intended for the use of the addressee(s) only. Unauthorized use may be unlawful. If you receive this email by mistake, please advise sender immediately. The views of the author may not necessarily constitute the views of Telco Electronics Limited. Nothing in this mail shall bind Telco Electronics Limited in any contract or obligation. Telco Electronics Limited 6-8 Oxford Court Brackley Northants NN13 7XY Tel 07000 701999 Fax 07000 701777

2 1

[Serusers] nat and rtpproxy/mediaproxy
by Richard 22 Apr '04

22 Apr '04

Hi, I looked at the archieve and tried to find a solution for natted clients in a carrier environment. I have to say I am clear as mud. In our senario, some clients are behind nat, while others are not. Clients may move between nat and no-nat. What's the best approach to rtpproxy/mediaproxy. In rtpproxy's readme, it uses "search" to find certain client. It has issues to support other clients. Is nat_uac_test/client_nat_test sufficient to test either src or dest is behind nat and should go through media proxy? What if some clients have stun support? What if some are behind symmetric NAT and some are not? Thanks for your help. Richard __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25� http://photos.yahoo.com/ph/print_splash

2 3

[Serusers] help
by Ronald Ramos 21 Apr '04

21 Apr '04

Hi All, I'd really appreciate any help from you guys. Below is my ser.cfg, when I start the daemon on debugging mode....port 5060 opens up but starting ser doesn't say it's [OK]. it just stopped pls see below. [root@nj modules]# /etc/rc.d/init.d/ser restart Stopping ser: [FAILED] Starting ser: When I start it not on debugging mode, it says starting ser [OK], even on the message log it says that startup of ser suceeded but when I do a netstat, I don't see the 5060 open. Also, I have two SIP phones, I created two subscriber 1001 and 1002, I tried to test it when 5060 is open on my sip server, but I always get the busy line. And on one of the phones, the screen shows 404. here is my ser.cfg, hope you can guys help me out, TIA # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) #/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" listen=192.168.0.2 listen=127.0.0.1 alias="silverbackasp.com" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=="silverbackasp.com") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize ("silverbackasp.com", "subscriber")) { www_challenge("silverbackasp.com", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }

2 2

[Serusers] is it /usr/local/ or /usr?
by Richard 21 Apr '04

21 Apr '04

Hi, CVS compile seems to use /usr/local/, eg. /usr/local/lib/module, /usr/local/sbin and etc. 0.8.12 RPM installs uses /usr, eg. /usr/lib/modules, /usr/sbin/. Why is it different? Is there a standard directory? Thanks, Richard __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25� http://photos.yahoo.com/ph/print_splash

2 1

RE: [Serusers] multiple domains
by Zeus Ng 21 Apr '04

21 Apr '04

Both stable and unstable release have the serctl command. There is nothing to do with rpm. You can insert the domain records into mysql directly if that's what you want. However, to get SER authenticate domain, you need: modparam("usrloc", "use_domain", 1) modparam("registrar", "use_domain", 1) Zeus > -----Original Message----- > From: gaillac harry [mailto:gaillacharry@yahoo.fr] > Sent: Tuesday, 20 April 2004 9:43 PM > To: Zeus Ng > Subject: RE: [Serusers] multiple domains > > > Hi, > > I don't use "serctl domain add" because of I can't build rpm > with instable SER release from CVS so I use SER-0.8.12 > stable. I can't configure the last serweb release from CVS ( > I waste much time). here is my ser.cfg > > # ----------- global configuration parameters ------------------------ > > #debug=3 # debug level (cmd line: -dddddddddd) > #fork=yes > #log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > debug=7 > fork=yes > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > #listen=192.168.0.1 > children=4 > fifo="/tmp/ser_fifo" > fifo_mode=0666 > #alias="example.com" > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/lib/ser/modules/mysql.so" > > loadmodule "/usr/lib/ser/modules/sl.so" > loadmodule "/usr/lib/ser/modules/tm.so" > loadmodule "/usr/lib/ser/modules/rr.so" > loadmodule "/usr/lib/ser/modules/maxfwd.so" > loadmodule "/usr/lib/ser/modules/domain.so" > loadmodule "/usr/lib/ser/modules/usrloc.so" > loadmodule "/usr/lib/ser/modules/registrar.so" > loadmodule "/usr/lib/ser/modules/msilo.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > loadmodule "/usr/lib/ser/modules/auth.so" > loadmodule "/usr/lib/ser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > #modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in > this config), > # uncomment also the following parameter) > # > modparam("auth_db", "password_column", "password") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) # --domain module-- > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > modparam("domain", "db_mode", 1) > modparam("domain", "domain_table", "domain") > modparam("domain", "domain_col", "domain") > # --msilo params-- > modparam("msilo", "registrar", "sip:registrar@example.com") > modparam("msilo", "db_url", "sql://ser:heslo@localhost/ser") > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (is_from_local()) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("", "subscriber")) { > www_challenge("", "0"); > break; > }; > > save("location"); > m_dump(); > break; > }; > > # native SIP destinations are handled using our > USRLOC DB > lookup("aliases"); > if (!lookup("location")) { > if (method == "MESSAGE") { > if (!t_newtran()) { > sl_reply_error(); > break; > }; > }; > if (m_store("0")) { > t_reply("202", "Accepted for Later Delivery"); > break; > }; > > t_reply("503", "Service Unavailable"); > break; > }; > }; > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > > } > > > Le mar 20/04/2004 Ã 13:16, Zeus Ng a Ã©crit : > > First, make sure you have support.example.com and > example.com in your > > domain table. Use > > > > serctl domain add example.com > > serctl domain add support.example.com > > > > Second, depending on the version of SER you are using, you may need > > some or all of the following. > > > > modparam("usrloc", "use_domain", 1) > > modparam("registrar", "use_domain", 1) > > > > Zeus > > > > > -----Original Message----- > > > From: serusers-bounces(a)lists.iptel.org > > > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of gaillac harry > > > Sent: Tuesday, 20 April 2004 7:31 PM > > > To: serusers(a)lists.iptel.org > > > Subject: [Serusers] multiple domains > > > > > > > > > Hi all, > > > > > > here is my problem when i use serctl to add a account the > > > domain name is extract from email address and insert to > > > domain field of subscriber table. I added two domains > > > (support.example.com and example.com) but if i use digest > > > authentication (!www...) the client send is domain and SER > > > look at its subscriber domain field so it's right for > > > example.com's clients. > > > > > > I have to change domain name in subscriber table for all > > > support.example.com's clients or don't use digest authentication! > > > > > > May I use one SERWEB per domain ? > > > > > > is it possible to avoid changing domain field of subscriber > > > table for accounts of others domains? > > > > > > What about dns srv may I have to add srv recording for each > > > domain or using outbound proxy? > > > > > > Regards > > > Harry > > > > > > >

2 2

← Newer
1
...
8
9
10
11
12
13
14
...
27
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2004