> I don't like the idea of having 2 or 3 programs in my path.
Neither do I :-) Asterisk is a stateful *ahem* softswitch/proxy, that
always generates a BYE. It communicates directly with whatever it
connects to, unless you redirect of course. I wouldn't use Asterisk for
this purpose of course for many reasons either, I was just making a
point :-)
Matt
-----Original Message-----
From: Erik Versaevel [mailto:erik@infopact.nl]
Sent: Thursday, December 30, 2004 9:07 AM
To: Matt Schulte
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] CDR Issues
Mediaproxy suffers the same problem, just put the call on hold
(otherwise it would be idle and terminate after 60 seconds) and pull the
plug, i'm not sure if the same goes for asterisk, but I don't like the
idea of having 2 or 3 programs in my path.
Kind regards,
E. Versaevel
Matt Schulte wrote:
>Yes this is a common problem, you would need a stateful RTP session.
>ie: What Asterisk does, I've found no way to do this without some kind
>of media proxy. You can however log incomplete calls and take
>countermeasures against them, what those would be of course is the
>question.
>
>-----Original Message-----
>From: Erik Versaevel [mailto:erik@infopact.nl]
>Sent: Thursday, December 30, 2004 8:32 AM
>To: serusers(a)lists.iptel.org
>Subject: [Serusers] CDR Issues
>
>
>OK, i've run into a problem with the CDR Creation.
>
>If you have 2 users who call each other, talk a while and then instead
>of hanging up decide to pull the plugs from their phones (or
terminitate
>
>their application), no complete CDR is generated, the INVITE and ACK
>are
>
>logged, but since no one realy hangs up there won't be a BYE record, so
>no CDR end/total time and no billable time.
>Use the / a rtpproxy you would say, to bad it suffers from the same
>problem, if both partes put the call on hold and pull the plug the call
>keeps existing and once again an incomplete CDR.
>
>Has anyone ever suffered the same problem? And what is the most
>reliable
>
>way to generate CDRs?
>
>Kind regards,
>
>E. Versaevel
>
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
Yes this is a common problem, you would need a stateful RTP session. ie:
What Asterisk does, I've found no way to do this without some kind of
media proxy. You can however log incomplete calls and take
countermeasures against them, what those would be of course is the
question.
-----Original Message-----
From: Erik Versaevel [mailto:erik@infopact.nl]
Sent: Thursday, December 30, 2004 8:32 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] CDR Issues
OK, i've run into a problem with the CDR Creation.
If you have 2 users who call each other, talk a while and then instead
of hanging up decide to pull the plugs from their phones (or terminitate
their application), no complete CDR is generated, the INVITE and ACK are
logged, but since no one realy hangs up there won't be a BYE record, so
no CDR end/total time and no billable time.
Use the / a rtpproxy you would say, to bad it suffers from the same
problem, if both partes put the call on hold and pull the plug the call
keeps existing and once again an incomplete CDR.
Has anyone ever suffered the same problem? And what is the most reliable
way to generate CDRs?
Kind regards,
E. Versaevel
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
OK, i've run into a problem with the CDR Creation.
If you have 2 users who call each other, talk a while and then instead
of hanging up decide to pull the plugs from their phones (or terminitate
their application), no complete CDR is generated, the INVITE and ACK are
logged, but since no one realy hangs up there won't be a BYE record, so
no CDR end/total time and no billable time.
Use the / a rtpproxy you would say, to bad it suffers from the same
problem, if both partes put the call on hold and pull the plug the call
keeps existing and once again an incomplete CDR.
Has anyone ever suffered the same problem? And what is the most reliable
way to generate CDRs?
Kind regards,
E. Versaevel
We are a PSTN to VOIP provider, we've always made the username the phone
number in our case. If they had more than one number then we would use
our own alias script that did a table lookup. Ser has a builtin alias
database that's simple and based off of the usrloc database. That may be
up your alley.
-----Original Message-----
From: Abid A. Mirza [mailto:amirza_nyc@yahoo.com]
Sent: Thursday, December 30, 2004 4:57 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] Please help me identify
Thanks for your reply, but my question Location DB only contain Usename
in the format of User(a)mydomain.com, how do I lookup the numerical number
that is assigned to user(a)mydomain.com Let say User@mydoamin is assigned
747122 to him, location DB does not contain these alias at all. Please
reply with solution?
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/04
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
You'll need to be a little more specific. I understand you may not know
a lot about SER (or SIP for that matter), but what do you mean you can't
login? Are you trying to register? Are you trying to add users to the
usrloc (user location) database? It sounds like it's not even running?
Please post your ser.cfg ..
You can run 'ser -dddd' to get debug info, it may log to
/var/log/messages or to the screen you run it on. If you see something
like "signal 15" then it's most likely a config file problem or a
failure when it tries to load.
Matt
-----Original Message-----
From: Zhaomin [mailto:zhaomin@kingdream.com]
Sent: Wednesday, December 29, 2004 7:23 PM
To: serusers(a)lists.iptel.org
Subject: [Serusers] I am newcome ,I can not login my sip server that I
build?
I am newcome ,I can not login my sip server(ser0.8.14) that I build? I
run the commamd serctl ping localhost echo me 400.Where is failt
?Anyones can help me
Hi all
I have been experiment few problems with radius and ser runs
together as follow:
Problem number one: “unique_id” is not ever “unique_id” .
Sometimes I get the unique_id and the acct_session_id repeating. In
consequence I can’t get call duration precisely.
Problem number two: when I get a pstn call the “called_id”
get place the “calling_id” when “called_id” hang-up.
Problem number tree: how can I change the
“accounting_stop_query = update” instruction by another one that uses
“accounting_stop_query = insert” instruction.
Thank for your help, attention and kindness
Alessandro Pereira
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/2004
I had similar problem I followed the Tutorial and did
Chmod 777 /tmp/ser_fifo
http://www.aarnet.edu.au/events/conferences/2004/apan-questnet/sipworkshop/s
er-install.html
Hope this works
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/04
Thanks for your reply, but my question Location DB only contain Usename in
the format of User(a)mydomain.com, how do I lookup the numerical number that
is assigned to user(a)mydomain.com Let say User@mydoamin is assigned 747122 to
him, location DB does not contain these alias at all.
Please reply with solution?
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/04
Hi All.
I have a problem with SER when i use mediaproxy.
I install SER in a computer(Linux Fedora 2) with ip
192.168.1.37.
System run properly.
I install more mediaproxy into system SER because i
want to solve
problem NAT.I had configured my config file.
I begin test system mediaproxy :
I have 2 GranStream BT100:
BT1 :192.168.1.33 Phone :111
BT2 :192.168.1.35 Phone :333
When i make a call from 333 to 111 then display
following:
[root@dhcppc4 root]# tail -f /var/log/messages
Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: command
delete
57d2c31487b829d9(a)192.168.1.33 info=
Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: command
execution time:
0.77 ms
Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: command
request
57d2c31487b829d9(a)192.168.1.33 192.168.1.33:5004:audio
192.168.1.33
192.168.1.37 local 192.168.1.35 remote
Grandstream=20BT100=201.0.5.16
info=from:111@192.168.1.37:5060,to:333@192.168.1.37:5060,fromtag:41cbda14a0e4af53,totag:
Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: domain
192.168.1.37
doesn't define any mediaproxy.
Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: will
use default
mediaproxy for this call.
Dec 30 11:59:55 dhcppc4 mediaproxy[3296]: command
request
57d2c31487b829d9(a)192.168.1.33 192.168.1.33:5004:audio
192.168.1.33
192.168.1.37 local 192.168.1.35 remote
Grandstream=20BT100=201.0.5.16
info=from:111@192.168.1.37:5060,to:333@192.168.1.37:5060,fromtag:41cbda14a0e4af53,totag:,dispatcher
Dec 30 11:59:55 dhcppc4 mediaproxy[3296]: session
57d2c31487b829d9(a)192.168.1.33: started. listening on
192.168.1.37:35022
Dec 30 11:59:55 dhcppc4 mediaproxy[3296]: command
execution time: 4.85
ms
Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]:
forwarding to mediaproxy
on /var/run/mediaproxy.sock: got: '192.168.1.37 35022'
Dec 30 11:59:55 dhcppc4 proxydispatcher[3292]: command
execution time:
246.63 ms
Dec 30 12:00:17 dhcppc4 mediaproxy[3296]: command
status
Dec 30 12:00:17 dhcppc4 mediaproxy[3296]: command
execution time: 0.48
ms
Dec 30 12:00:55 dhcppc4 mediaproxy[3296]: session
57d2c31487b829d9(a)192.168.1.33: 0/0/0 packets, 0/0/0
bytes
(caller/called/relayed)
Dec 30 12:00:55 dhcppc4 mediaproxy[3296]: session
57d2c31487b829d9(a)192.168.1.33: ended (did timeout).
I see no packets throught mediaproxy and Ser dead.And
when i do
statement ./sessions.py then display :
Caller Via Called Status
Duration Codec
Type Traffic
---------------------------------------------------------------------------------------
?.?.?.?:? - 192.168.1.37:35022 - ?.?.?.?:? inactive
0'22" Unknown
Audio 0/0/0
I don't know to solve it.
Can anybody help me.
Thanks a lot.
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
