sr-users December 2004

sr-users@lists.kamailio.org

184 participants
400 discussions

Start a nNew thread

[Serusers] Increasing SER memory
by Darren Sessions 01 Dec '04

01 Dec '04

How do I increase the memory available to SER.

2 3

[Serusers] help: avpops question
by Java Rockx 01 Dec '04

01 Dec '04

Hi All. I'm using ser-0.8.99-dev19 and I'm trying to figure out how to get avpops to tell me if (to_uri==from_uri) for INVITE messages. I want to do a quick test to see if a user is calling their own extension and route them to voicemail accordingly. I'm having a bit of trouble understanding avpops. Do I need to use the database functionality to do this or can I do it without MySQL? Anyhow here is about what I've got - but is wrong and I'm unclear on how to get this to work ser.cfg snippet: loadmodule "/usr/local/lib/ser/modules/avpops.so" route { # usual checks # REGISTER stuff if ((method=="INVITE") && is_user_in("Request-URI", "voicemail")) { if (avp_check("$from", "$to")) { log(1, "Sending to Voicemail"); route(4); }; }; # lookup aliases stuff # etc } route [1] { # send to voicemail route } But starting ser gives these errors AVPops - initializing ERROR:avpops:parse_check_value: parse error in <$to> pos -135487828 ERROR:avpops:fixup_check_avp: failed to parse checked value ERROR: fix_expr : fix_actions error Regards, Paul __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail

2 4

[Serusers] Mediaproxy Call Hold
by Adrian Georgescu 01 Dec '04

01 Dec '04

You do not have to tear down manually media sessions. The sessions are automatically managed (added/deleted) per call by MediaProxy server. Just make sure you rewrite the contact and forward the RE INVITES in ser.cfg. With a correct ser.cfg configuration you see in the status page that the call is on hold and becomes active once you return from hold. Adrian >> Hello, What is the default behaviour for mediaproxy on call holds? Is there a need to tear down an open media session when a re-Invite is received with the typical on-hold values? Or is this handled by the dispatcher automatically? Thanks, best regards, Martin

1 0

[Serusers] RTCP XR Support
by Walter Carter 01 Dec '04

01 Dec '04

Good morning, I was wondering if the SER supports RTCP XR? Regards, Walt Carter EarthLink Service and Technology Monitoring 404-748-7240 Office 404-275-2441 Mobile

2 1

[Serusers] serweb account info error
by support 01 Dec '04

01 Dec '04

Hi, I have just installed serweb successfully on FC 2. Initially, I notice there is one user called admin show on the index page, but when I clicked into account, an error shows in red color: sorry -- cannot open write fifo I try to add a user, and the same error message occurs. What is the problem? Thomas

1 0

[Serusers] bus error in ser 0.8.99-dev19/openbsd/sparc32/mysql
by msg 01 Dec '04

01 Dec '04

Greetings: Please see my previous posts regarding a bus error in 'dbt_tb.c'; since dbtext wasn't working I thought I'd try mysql.so. For OpenBSD/sparc 3.2 the MySQL package binary distribution is release 3.23.49. Script 'ser_mysql.sh' successfully created the tables; 'serctl add' successfully added a user. The same 'ser.cfg' as used for 'dbtext' testing (attached to previous post) changed to load mysql.so and reference the proper db_url parses ok. The SIGBUS happens in a library routine in libmysqlclient.so.10.0 which is not compiled with debugging symbols. The core file is about 36MB. Please let me know if I should send a tarball of the works to someone. Again, all help is much appreciated. Michael -------------------------------------------------------------------------- Here is the log (after the aliases listing): stateless - initializing 0(0) Maxfwd module- initializing mysql - initializing Here is the backtrace: Program terminated with signal 10, Bus error. Reading symbols from /usr/lib/libc.so.28.5...done. Reading symbols from /usr/libexec/ld.so...done. Reading symbols from /usr/local/lib/ser/modules/mysql.so...done. Reading symbols from /usr/local/lib/libmysqlclient.so.10.0...done. Reading symbols from /usr/lib/libz.so.1.4...done. Reading symbols from /usr/lib/libm.so.0.1...done. Reading symbols from /usr/local/lib/ser/modules/sl.so...done. Reading symbols from /usr/local/lib/ser/modules/tm.so...done. Reading symbols from /usr/local/lib/ser/modules/rr.so...done. Reading symbols from /usr/local/lib/ser/modules/maxfwd.so...done. Reading symbols from /usr/local/lib/ser/modules/usrloc.so...done. Reading symbols from /usr/local/lib/ser/modules/registrar.so...done. Reading symbols from /usr/local/lib/ser/modules/textops.so...done. Reading symbols from /usr/local/lib/ser/modules/auth.so...done. Reading symbols from /usr/local/lib/ser/modules/auth_db.so...done. #0 0x86562b0 in simple_command () (gdb) bt #0 0x86562b0 in simple_command () #1 0x865807b in mysql_real_query () #2 0x8657eb3 in mysql_query () #3 0x8522127 in submit_query (_h=0x2c03c8, _s=0x8632770 "select table_version from version where table_name='subscribe '") at dbase.c:90 #4 0x8525267 in db_query () at dbase.c:305 #5 0x10d503 in table_version (dbf=0x93f8308, connection=0x2c03c8, table=0xf7fff3a8) at db/db.c:176 #6 0x92f3c73 in auth_db_ver () at authorize.c:340 #7 0x92f1d73 in str_fixup (param=0x2c1650, param_no=2) at authdb_mod.c:238 #8 0x73007 in fix_actions (a=0x2c1638) at route.c:239 #9 0x71e0f in fix_expr (exp=0x2c1688) at route.c:133 #10 0x715eb in fix_expr (exp=0x2c16cc) at route.c:101 #11 0x72c57 in fix_actions (a=0x2c19c0) at route.c:217 #12 0x72cb3 in fix_actions (a=0x2c1c10) at route.c:221 #13 0x72cb3 in fix_actions (a=0x2c05c8) at route.c:221 #14 0x75413 in fix_rls () at route.c:695 #15 0x4514b in main (argc=7, argv=0xf7fff87c) at main.c:1433 #16 0x1610f in ___start ()

1 0

[Serusers] SER and linux virtual server
by AJ Grinnell 01 Dec '04

01 Dec '04

Has anyone tried, with or without success, using linux virtual server along with SER for load balancing? Is this a good or bad idea? Any ideas or suggstions are welcome. Thanks.

1 0

[Serusers] Group Radius failures
by AJ Grinnell 01 Dec '04

01 Dec '04

When running a debug on SER 0.8.14, I see "radius_is_user_in(): Failure" yet I dont even see any activity hitting my RADIUS server. Authentication and URI_Radius both work fine on the same RADIUS server. Im stumped, anyone else have this problem?

1 0

[Serusers] External Notify (ser+asterisk)
by mohammad mirzaee 01 Dec '04

01 Dec '04

Hi ALL; Hi Paul; About Paul's email on SEP.19 with the subject " ingecting SIP NOTIFY INTO SER FIFO" , I come up with the following question: Why we use "sipsak" for sending "NOTIFY" message from Asterisk to Ser?? Is it because of Asterisk is not a "b2bua" Warnest Regards mohammad

3 2

[Serusers] cannot login to serweb
by support 01 Dec '04

01 Dec '04

Hi everyone, After I have installed serweb by default, with db_name=ser and db_passwd=heslo, when I go to http://localhost/html/admin/index.php login page, using Username: admin Password: heslo I cannot login the page. Thomas

4 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2004