sr-users November 2003

sr-users@lists.kamailio.org

116 participants
267 discussions

by José Nunes

Hello, I've been working whit SER for a while, and I need to have some way of redirecting Invites dynamicly. The idea is similar to the definition of groups (local,ld,...), only I want to be able to define the redirection address without having to rewrite ser.cfg (and therefor reinitialize SER). The part of defining these new groups and addresses was straightforward, after that I tried to build a module that would have a function to do the writing of the "To" URI. The only function I found to alter the destination URI was append_branch. The module compiles without error and SER works normally, except it does not do the redirections that I was hoping. Are there any other ways of adding/rewriting something to the body of "To" in the SIP message? Or one can only do that in ser.cfg? Thanks in advance, José Nunes

20 years, 5 months

[Serusers] ser route config problem again

by xwang＠novsky.com

sorry for again and again because my mail seems to be unreadable Pls help me to config ser.cfg Now my envirmonet is: ser server: 172.16.255.1:5060 ( without DNS server ) SIP PSTN gateway: 172.16.255.1:6050 SIP UA: 172.16.2.xx And all SIP UAs have a PSTN number like 6169xxxx There are no DNS server in the system.(we don't apply for a domain name) I want: 1 All users use digest authorization when SIP UA registing ------ finished 2 All calls from SIP UA need authorization (return 407 to Invite request) 3 All calls to PSTN transfer to the SIP PSTN gateway(number no like "6169xxxx") -------- almost finished 3 All calls from the SIP PSTN gateway do not need authorization(I think use a caller sip:gateway@172.16.255.1:6050 as caller when call from gateway,then all call from this user and this ip address needn't authorazation) 4 All calls need write CDR record to mysq datebase The bigest problem is I don't know how to write conditonal sentence , like if(uri!=~"xxxx") or if((uri=="xxxx") | (uri=="yyyy")) There are no document talking about the syntax. Please help me. Any help is appreciate. Now my ser.cfg is: # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ debug=7 log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests # if (!mf_process_maxfwd_header("10")) { # sl_send_reply("483","Too Many Hops"); # break; # }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("novsky.com", "subscriber")) { www_challenge("novsky.com", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB # if (!lookup("location")) { # if(uri=~"^sip:6169*@") { # forward(172.16.255.1,6050); # break; # }; # else { # sl_send_reply("404", "Not Found"); # break; # }; # }; if(uri=~"^sip:6169[0-9]*@[0-9|\.]*") { if(!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; forward(172.16.255.1,6050); break; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Best regards wangji

20 years, 5 months

[Serusers] Ser CDRs

by Gregory D. Burns

Guys, Im new with ser, but it seem great so far. The customer Im working with want to get reliable CDRs from his SER SIP Server. He also has pre-paid customers on it so it need to check to see if they have monies to make the call, and when the call is done, it need to calculate and deduct the cost of the call from their balance. I have been using exec_msg command to try and do this, but I been having a hard time getting it to work right because I get more then one invites and acks. Also sometime they miss-dial and I only get Invites. So I guess my is, are exec_msgs the right way to go? Is anyone else doing the same thing, if so could you share you config with me? -Greg Voipin.com # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=yes log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 children=4 fifo="/tmp/ser_fifo" mhomed=yes # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" #loadmodule "/usr/local/lib/ser/modules/group.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc","db_mode",2) modparam("usrloc", "timer_interval", 30) modparam("usrloc","db_url", "sql://ser:dc74uc@localhost/Tigris") # -- auth params -- modparam("auth_db", "db_url", "sql://ser:dc74uc@localhost/Tigris") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ /* ********* ROUTINE CHECKS ********************************** */ # Take take of Max hops if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; # Too big for a SIP msg. if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Authorize if (method=="REGISTER") { if (!www_authorize("64.81.40.173", "subscriber")) { www_challenge("64.81.40.173", "0"); log(1, "BAD REGISTER\n"); break; }; save("location"); break; }; exec_msg('`/root/bin/logcdr.pl`'); loose_route(); if (method=="INVITE") { record_route(); if (!exec_msg('`/root/bin/test.pl`')) { t_reply("404", "Low Funds"); break; }; }; if (uri =~"^sip:[0-1]") { if (uri =~"^sip:1666") { rewritehostport("216.91.9.42:5060"); if (!t_relay()) { sl_reply_error(); }; break; }; if (uri =~"^sip:1") { rewritehostport("128.121.29.99:5060"); if (!t_relay()) { sl_reply_error(); }; break; }; if (uri =~"^sip:011") { rewritehostport("128.121.29.99:5060"); if (!t_relay()) { sl_reply_error(); }; break; }; if (uri =~"^sip:00") { strip(2); prefix("011"); rewritehostport("128.121.29.99:5060"); if (!t_relay()) { sl_reply_error(); }; break; }; } else { if (!lookup("location")) { sl_send_reply("404", "User Not Found"); log("SER: Dest User Not in location table.\n"); break; }; if (!t_relay()) { sl_reply_error(); }; break; }; }

20 years, 5 months

Re: [Serusers] The completion of ser automatic meeting system construction was carried out.

by Mike Dehn

Could someone please elaborate on this a bit more? I have looked through the last two months of the serusers archive and can't find any reference to it. What is the function of the 'ser automatic meeting systerm'? Is it documented? Available? Thanks - Mike At 03:33 AM 11/25/2003, you wrote: >All the problems described to the mailing list were solvable. > >The completion of ser automatic meeting system construction was carried out. >RedHat 9 + FreeRadius + PostgreSQL > > Ser 0.8.12 + Serweb All ok > >--------------------------- >voice lab inc. saitama japan. >test call : sip:8700@voice.dyn.to >test call : sip:8700@iptel.org >--------------------------- > >----------------------- >voice lab inc. Saitama Japan. >----------------------- > >Hello <sip:8001@iptel.org>, >8200 <sip:8200@voice.dyn.to:5062>;tag=175262804 left a voice message for >you. > >Thank you for using voice.dyn.to's Voicemail. > >Your voicemail system. > >--------------------------------------------------------- >This message was created by voice.dyn.to's voicemail system. >Please review <http://www.voice.dyn.to>www.voice.dyn.to for more information. >--------------------------------------------------------- >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers

20 years, 5 months

[Serusers] Server error

by Urvish Khandwalla

i have a 6 line SIP phone. Its IP address is 192.168.1.159. Im placing a call to 5555 ( another line on the same phone). I have set the proxy for both the lines to my SERs IP address (192.168.1.240).I havent enabled register with proxy on the phone but i tried that before and that gave me the same server error as the one mentioned below. These are the packets that i have captured while making the call. Now the problem is that I am unable to understand the kind of internal error it is giving. 18 6.670873 192.168.1.159 192.168.1.240 SIP/SDP Request: INVITE sip:5555@192.168.1.240, with session description 19 6.671179 192.168.1.240 192.168.1.159 SIP Status: 100 trying -- your call is important to us 20 6.732622 192.168.1.240 192.168.1.159 SIP Status: 500 I'm terribly sorry, server error occured (2/TM) 21 6.801520 192.168.1.159 192.168.1.240 SIP Request: ACK sip:5555@192.168.1.240 Also the SIP message header of Packet 20 , as shown below, talks about warning 392. Does anyone know what warning it is? FRAME 20: Session Initiation Protocol Status line: SIP/2.0 500 I'm terribly sorry, server error occured (2/TM) Message Header Via: SIP/2.0/UDP 192.168.1.159:5060 From: "in2" <sip:in2@192.168.1.240>;tag=00036b3c33b500071afb6b0a-38f8c47a To: <sip:5555@192.168.1.240>;tag=a6a1c5f60faecf035a1ae5b6e96e979a-188d Call-ID: 00036b3c-33b50007-2047443d-0967cdd3(a)192.168.1.159 CSeq: 101 INVITE Server: Sip EXpress router (0.8.11 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.240:5060 "Noisy feedback tells: pid=925 req_src_ip=192.168.1.240 req_src_port=5060 in_uri=sip:5555@192.168.1.240 out_uri=sip:5555@192.168.1.240 via_cnt==112" I have attached my ser.sfg for your reference. TIA, Urvish Khandwalla

20 years, 5 months

[Serusers] 0.8.12 usrloc + mysql crashing !

by Tristan Colgate

Hi, I've been running a CVS version of ser recently with no problems, however I wanted to move back to using a release version so have downloaded 0.8.12, things seemed to be going OK, but it seems that SER crashes when my REGISTER stuff attempts to do a save("location"), I am doing a check_to before that it that works fine and queries the mysql backend no problems, I am using db_mode = 1 if that makes a difference, I tried using mode 2, which seemed to work but then crashed later (presumably when trying to write to the db). Nothing is ending up i the database and I am not seeing any INSERTs arriving at the database server. The error output I see after the check_to seems to work is.... 11(3419) check_username(): From/To user '8540' and auth user match 11(3419) parse_headers: flags=-1 19(3427) BUG: tcp_main_loop: dead child 11 0(3408) child process 3419 exited by a signal 11 0(3408) core was not generated 0(3408) INFO: terminating due to SIGCHLD 1(3409) INFO: signal 15 received 1(3409) Memory status (pkg): ..... -- Tristan Colgate Inux Technologies E-Mail: tristan(a)inuxtech.co.uk Mobile: 07900 690 912

20 years, 5 months

[Serusers] Does SER support virtual IP interfaces?

by Michael C. Cambria

Hi, I've installed ser-0.8.11 on FreeBSD via ports. Things run fine on a private LAN. I have setup a pp2p tunnel, which shows up as ng1 in FreeBSD's ifconfig. This allows Windows users at the remote end of the tunnel to see the FreeBSD box just fine. The pp2p tunnel runs over a NAT'ed, public IP address to another box which does the same thing. However, NAT isn't (or shouldn't be) in the loop as the pp2p tunnel hides all this. The public internet looks like one p2p link. I've verified the above via tcpdump using many different applicationss. Private addresses are used on both LAN's. Any box can see any box just fine. On one FreeBSD machine, I am also running SER. It doesn't seem to respond to the register SIP message. SER is listening ONLY to the ip address that corresponds to its end of the pp2p tunnel. Before I dig into what I might be doing wrong, I'd like to know if the above is even supported. Thanks, MikeC

20 years, 5 months

[Serusers] CISCO returns "481 Call Leg/Transaction Does Not Exist"

by - zaki -

Hi, I'm using ser-0.8.12 for SIP proxy and CISCO2651XM(12.2(11)T8) as media gateway for PSTN. When any subscriber call to PSTN via CISCO media gateway, CISCO returns "SIP/2.0 183 Session Progress", and if caller hang up before called party in PSTN pick up a call, CISCO send a packet of "SIP/2.0 481 Call Leg/Transaction Does Not Exist" and call between CISCO and PSTN called party is not hung up. (Called party phone continue ringing) (I consider that transaction before caller party pick up is not added CISCO's transaction table.) Could anyone please let me know how to terminate a call between CISCO media gateway and called party in PSTN? Regards, -- - zaki - YAMAZAKI Noriyuki, Director of EDGE Co., Ltd. +81-3-5749-9621(Phone), +81-3-5749-9910(Fax), zaki(a)edge.jp

20 years, 5 months

AW: [Serusers] CPLEd and cpl-c module

by Brinker, Oliver

Hello Daniel, after changing the db url in the ser.cfg SER starts without any problem. Now I will try to write some CPL scripts via CPLEd. One last question: I'm not really sure where to place the cpl_run_script call in my SER configuration. Do you have any advice for me? Many thanks again. Regards, Oliver Daniel-Constantin Mierla wrote >Hello, >if you use the CVS head version then you should change the format of >database url: Now it reflects the type of database used and for mysql >should be like: > >mysql://foo:bar@localhost/ser > >Try with this one when setting the "cpl_db" parameter. > >Daniel On 11/26/2003 11:30 AM, Brinker, Oliver wrote: >Hi Bogdan, > >The mysql module is loaded before the cpl-c one. Please have a look into >my ser.cfg because I cannot find any misconfig. Could it be a problem >with the SQL connection string? MySQL should be running correct. > >I change the module name in the modparam declaration from cpl_c to cpl-c >because cpl_c like in your documentation doesn't work ;) Thanks > >Oliver > ># ># $Id: ser.cfg,v 1.24 2003/11/11 15:32:36 andrei Exp $ ># ># simple quick-start config script ># > ># ----------- global configuration parameters ------------------------ > >#debug=3 # debug level (cmd line: -dddddddddd) >#fork=yes >#log_stderror=no # (cmd line: -E) > >/* Uncomment these lines to enter debugging mode >fork=no >log_stderror=yes >*/ > >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >#port=5060 >#children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > ># Uncomment this if you want to use SQL database >loadmodule "/usr/local/lib/ser/modules/mysql.so" > >loadmodule "/usr/local/lib/ser/modules/cpl-c.so" >loadmodule "/usr/local/lib/ser/modules/sl.so" >loadmodule "/usr/local/lib/ser/modules/tm.so" >loadmodule "/usr/local/lib/ser/modules/rr.so" >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/lib/ser/modules/registrar.so" >loadmodule "/usr/local/lib/ser/modules/textops.so" > ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >loadmodule "/usr/local/lib/ser/modules/auth.so" >loadmodule "/usr/local/lib/ser/modules/auth_db.so" > ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >#modparam("usrloc", "db_mode", 0) > ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >modparam("usrloc", "db_mode", 2) > ># -- auth params -- ># Uncomment if you are using auth module ># >modparam("auth_db", "calculate_ha1", yes) ># ># If you set "calculate_ha1" parameter to yes (which true in this config), ># uncomment also the following parameter) ># >modparam("auth_db", "password_column", "password") > ># -- rr params -- ># add value to ;lr param to make some broken UAs happy >modparam("rr", "enable_full_lr", 1) > ># -- cpl-c module -- >modparam("cpl-c","cpl_db","sql://foo:bar@localhost/ser") >modparam("cpl-c","cpl_table","cpl") >modparam("cpl-c","cpl_dtd_file","/usr/local/etc/ser/cpl-06.dtd") >modparam("cpl-c","log_dir","/var/log/ser/cpl") >modparam("cpl-c","proxy_recurse",0) > ># ------------------------- request routing logic ------------------- > ># main routing logic > >route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (msg:len >= max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > break; > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > route(1); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("t-systems.com", "subscriber")) { > www_challenge("t-systems.com", "0"); > break; > }; > > save("location"); > break; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > append_hf("P-hint: usrloc applied\r\n"); > route(1); >} > >route[1] >{ > # send it out now; use stateful forwarding as it works reliably > # even for UDP2TCP > if (!t_relay()) { > sl_reply_error(); > }; >} > > >Bogdan-Andrei IANCU [mailto:iancu@fokus.fraunhofer.de] wrote > > > >>Hi Oliver, >> >>The mysql module must be loade before the cpl-c one. Make sure about >>this in your configuration file. >> >>Bogdan >> >> > >Brinker, Oliver wrote: > > > >>Hi Bogdan, >>now I fetch the whole cvs tree and compile SER and the needed modules. >>Everything works fine until I put the cpl-c modparam values into ser.cfg. >>I get an error message on my xconsole that the cpl-c module cannot bind >>to the database. The mysql module is loaded because digest authentications >>works since a few days. Is there anything to mind regarding the order of >>loading modules or setting params in the ser.cfg? Many thanks. >> >>Regards, >>Oliver >> >> >>Bogdan-Andrei IANCU [mailto:iancu@fokus.fraunhofer.de] wrote >> >> >> >> >> >>>Hi Oliver, >>> >>>what branch of cvs do you use? or you use the head of cvs? >>>on CVS head everything is fixed - but you have to get the whole tree, >>>not only the TM. >>> >>>Regards, >>>Bogdan >>> >>> >>> >>> >>Brinker, Oliver wrote: >> >> >> >> >> >>>Hi Bogdan, >>> >>>I try to patch the TM module and get an error during patching t_reply.c: >>> >>>Hunk #2 FAILED at 375 >>>Hunk #3 FAILED at 400 >>> >>>I'm not sure but could the faked_env function be the problem (expect four params, >>>but receiving only two)? Should I use a new version of the TM module from the CVS? >>>Many thanks. >>> >>>Regards, >>>Olli >>> >>> >>> >>> >>> >>> >>> >>>>Hello, >>>> >>>>In order to compile the cpl-c module, you need to apply a patch to the >>>>tm_modulel you can finf this patch in modules/cpl-c/tm.patch. >>>>Please, use the patch from the same version of ser as the tm modules. Try to do >>>>so and let my know if it worked. >>>> >>>>Regards, >>>>Bogdan >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >> >> >> >> > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > >

20 years, 5 months

RE: [Serusers] Voicemail

by Darren Sessions

Thanks! :) -----Original Message----- From: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at] Sent: Wednesday, November 26, 2003 8:29 AM To: Darren Sessions; serusers(a)lists.iptel.org Subject: RE: [Serusers] Voicemail You can find sample configuration files here: http://iptel.org/~faqomatic/fom-serve/cache/92.html <http://iptel.org/~faqomatic/fom-serve/cache/92.html> Klaus -----Original Message----- From: Darren Sessions [mailto:dsessions@ionosphere.net] Sent: Wednesday, November 26, 2003 2:04 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Voicemail Importance: High Can someone provide me with the generic configuration for a SER box doing call routing that forwards calls to a separate SER box running SEMS for voice mail if the endpoint does not answer the phone?

20 years, 5 months

← Newer
1
2
3
4
5
6
7
8
9
...
27
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2003