sr-users November 2003

sr-users@lists.kamailio.org

116 participants
267 discussions

by Josh Newman

I may have posted this question before but I don't remember getting an answer so forgive me for posting this again. I am utilizing the fr_invite_timer so that I can forward a call to voicemail after about 20 seconds. The problem is that I would like to only do this for calls that are incoming to one of the registered users, so if the user is busy or unavailable we can send the call to voicemail. The problem that arises is that the timer is fired even for calls made by users calling the PSTN (via a cisco gateway). In those cases I want to let the call keep going without timing out since voicemail in that scenario is not relevant. Is there any way to differentiate the timer for these two scenarios? My methods for knowing whether the destination uri is a local registered user or the pstn is based on either is_uri_in() function or simply checking does_uri_exist(). The problem is that these are only known at "runtime" and the fr_invite_timer is set as a parameter when ser starts. Does anyone have any suggestions? Josh

20 years, 5 months

[Serusers] HELP HELP HELP. I WANT TO USE CISCO GATEWAY!!!!

by Akinsola Oyelakin

Hi Everyone, I am a newbie to SIP and I have a a network of voice routers (cisco 1760) I normally use full mesh H323. now I want to use SIP and let every voice router get in touch with the SIP server to know the IP address of the destination pattern (number). So the SIP server will be playing the role of a soft PBX. PLEASE help out with what I am suppose to do on the SER and each router. (I have the SER up and running.) Regards, Akin

20 years, 5 months

[Fwd: Re: [Serusers] SIP Instant Messaging UA]

by skaht

FYI, The National Institute of Standards (NIST) has a Java JAIN-SIP API that has a working presence and IM client. This is definitely Open Source and it works on Linux. Bye, skaht

20 years, 5 months

Re: [Serusers] SER w/MySQL install problems

by SCHWEIZER Laurent

Hello, we are many to have the same error with mysql http://mail.iptel.org/pipermail/serusers/2003-October/003352.html now, i use the cvs version and all seems ok. -------- Message d'origine-------- De: serusers-bounces(a)iptel.org de la part de Jon Ole Nome Date: dim. 02.11.2003 23:51 À: Andrei Pelinescu-Onciul Cc: serusers(a)iptel.org Objet: Re: [Serusers] SER w/MySQL install problems I've tested some more. If I start with default ser.cfg (without mysql support) everything is ok. If I uncomment the line loadmodule "/usr/lib/ser/modules/mysql.so" then /etc/rc.d/init.d/ser start responds with OK, but if I try ser status afterwards it responds with "ser dead but subsystem locked". The parse errors came from replacing "if (uri==myself)" with "if (uri=~avitrans.aero). The HOWTO said that I should do this. Any ideas? Thanks! Jon Ole ----- Original Message ----- From: "Andrei Pelinescu-Onciul" <pelinescu-onciul(a)fokus.fraunhofer.de>loadmodule "/usr/lib/ser/modules/mysql.so" To: "Jon Ole Nome" <jonome(a)avitrans.no> Sent: Sunday, November 02, 2003 10:46 PM Subject: Re: [Serusers] SER w/MySQL install problems > On Nov 02, 2003 at 22:00, Jon Ole Nome <jonome(a)avitrans.no> wrote: > > This is what's in /var/log/messages: > > > > Nov 2 21:59:30 tailrotor ser: parse error (100,19-20): parse error > This means you have a bad command at line 100, chars./columns 19-20. > > > Nov 2 21:59:30 tailrotor ser: parse error (100,19-20): bad command > > Nov 2 21:59:30 tailrotor ser: parse error (100,19-20): bad command > > Nov 2 21:59:30 tailrotor ser: parse error (100,23-24): bad command > > Nov 2 21:59:30 tailrotor ser: parse error (100,23-24): bad command > > Nov 2 21:59:30 tailrotor ser: parse error (100,25-26): bad command > > Nov 2 21:59:30 tailrotor ser: parse error (119,3-4): parse error > > Nov 2 21:59:30 tailrotor ser: parse error (119,3-4): > > Nov 2 21:59:30 tailrotor ser: ERROR: bad config file (8 errors) > > Nov 2 21:59:30 tailrotor ser: ser startup failed > > Look into your cfg at lines 100 and 119. > > Andrei _______________________________________________ Serusers mailing list Serusers(a)iptel.org http://mail.iptel.org/mailman/listinfo/serusers

20 years, 5 months

[Serusers] SER w/MySQL install problems

by Jon Ole Nome

I have just installed ser 0.8.11 on a RH 8.0 box using the rpm packages. Installed first ser and verified that I could start it, then installed ser-mysql and modified the ser.cfg according to the instructions in the SER HOWTO. When trying to start ser i get an error saying that the config file has 8 errors. Any ideas what migh tbe wrong? BR, Jon Ole

20 years, 5 months

[Serusers] New release of seradmin v .03e

by Xten India

Hai, We Xten released a newer version (seradmin v .03e) of SERAdmin. Xten is building this for the ser community and we would very much like your feedback so that we can build you a better product The Source code is available at http://developer.berlios.de/projects/seradmin SERAdmin is a GUI interface between SIP Express Router (SER) and a SER administrator.SERAdmin has an intuitive look and feel. SERAdmin provides control over many SER tasks such as: Start, Stop, Pause, Re-start, Monitor SER, Add User, Change Password and EmailId Delete User, Add Alias , Edit Alias etc. With this we can also use FIFO commands,Access controls,User Location. The objective of the SERAdminv03e is to support the ser-0.8.11 version also. This latest SER Administration Application handles both ser-0.8.10 and ser-0.8.11. What is new?. The following commands available in this release ------------------------------------------------ Ping(uri) - Pinging a URI Cisco_restart(uri) - Restart a Cisco Phone arg - Arguments of SER pwd - Present Working Directory t_uac_dlg - Initiate a Transaction you can download the components from http://developer.berlios.de/projects/seradmin For any feedback & help pls. contact xten_india(a)yahoo.com Regards, Team, Xten_india --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software

20 years, 5 months

[Serusers] :: The best Softphone ?

by abdoul

Hello, I'm using Xlite v1 and 2 but always having so strange behaviors with SER O.8.12: (direct connection , public ip - to - public ip) - with xlite v1 and/or v2 , when i try to make calls : xlite always send 404 not found to the caller (numbering plan: xxx-xxx-xxxx) - no problem to reach someone with Xlite when I type the login - when i make a call with Mitel 5055 or W. Messenger 5 no problem (vice et versa, both direction) I tried with siemens softphone, good behavior but not user friendly Now the question is , is there any other *free* good softphone for windows or is there anybody facing the same problem and know how to resolve it? regards abdoul

20 years, 5 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2003