Hi all,
I just installed ser on Red Hat linux 8.0 from
source code with the insructions given in the
INSTALL{without mySQL support}.which is
1)tar xvf ser-0.8.11_src.tar;
2)make;
3)make prefix=/usr/local install
I then registered two users from Mic.Windows
Messenger and Ubiquity softphone on separate
machines{Solaris and windows XP}. It went well while
registering. I get 200 OK replies to REGISTER
requests.
Then I try to call from one user to the other but
I can not get a session between these 2 clients
through the ser proxy. Ser replies client's INVITE
request with "100 trying" and clients waits a while
then got 408 "Request timeout" although I can list the
registrations with "serctl ul show" and confirm there
is 2 registered users.
Can anyone help me with this?
And also is there any mechanism to watch the incoming
and outgoing SIP messages to the ser proxy? and get a
detailed logging?
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
My configuration is ser 0.8.11 on Mandrake 9.1 with native php and
MySQL. It works fine. I also installed serweb and made the necessary
changes to its config.php. When I try to register a new user with serweb
and answer to the e-mail that was sent to me I get the following
message:
400 Table 'aliases' not found in memory, use save("aliases") or
lookup("aliases") in the configuration script first
By answering the e-mail the registration data in ser database is moved
to the subscriber table but can still be found in the pending table.
I tried to solve the error message by inserting "lookup("aliases")" in
the beginning of the ser.cfg file and also in the uri==myself condition
but then the ser doesn't start any more ("bad config file").
What should the configuration file look like?
TL
When I "klick" on the link in the mail I got in return after I "subscrib"
from the webb.
..../user_interface/index.php I get this messages:
"400 Table 'aliases' not found in memory, use save("aliases") or
lookup("aliases") in the configuration script first"
400 = bad request
Why is that? How can I get it right? I do not understand what to do with
"aliases".
Regardes Håkan
Hi,
Does SER come with a SIP Stack? If yes, does it provide both UAC and UAS?
---------------------------------
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
Is there any way to deal with a busy or out of service gateway? Would
either of these situations activate a failure that we could use to
change the route to a new gateway? If we set up the gateways in a
huntgroup scenaro, and 2 or 3 failovers had to take place, what sort of
delay could one expect?
Thanks,
Stephen
Subject: Re: [Serusers] Multiple SIP - PSTN Gateways
roughly like this:
if (uri=~"sip:972") {
sethostport("dfw.nationalgateways.com");
} else if (uri=~"sip:911") {
sethostport("emrgency.ngw.com");
} else {
sethostport("defaultgw.com");
};
t_relay();
That's it. No guarantee for positioning of semicolons and other
:$)"./... symbols.
-jiri
At 02:43 PM 9/25/2003, Wasik, Paul wrote:
>Hi all,
>
>Has anyone built a ser.cfg that can conditionally forward SIP calls to
>different SIP - PSTN gateways based on the outgoing calls area or
exchange
>code. I'm sure it can be done but I'm not that good with syntax of the
>ser.cfg file. I know how to route to single SIP GW based on the dialed
>string but how do I make SER use multiple SIP gateways? Can anyone
provide
>an example of this?
>
>Thanks,
>
>Paul
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi,
I am using windows messenger 5.0. This version supports SIP but i am not
able to log on as a first time user. The error i get is :
You have been signed out of SIP communications service because that service
has been temporarily shut down. Please try again later.
Is there any other free SIP client that experts could advice which works
with SER 0.8-11.
Thanks in advance,
Annie
Has anyone on this list been able to get SER to serve clients using an Intertex IX-66 firewall/router? Thanks for a
reply.
Nell
________________________________________
Web Classic Design
Webhosting, Design, Programming, Maintenance
Contact WCD:
Telephone: 1-423-443-4078
Toll Free: 1-866-789-8429
If no answer, call :
1-540-789-8429
1-540-230-2516
Email: info(a)webclassicdesign.net
On the World Wide Web: http://webclassicdesign.net
Hai,
UA's(Kphone and XLite) Authenticated with radius(file users and sql users)
(when we open the kphone ser sends the authentication request to radius. radius
accepts the request and send back the response to ser whether it is authenticated
User Agent.)
we get the following message in radius screen
-----------------------------------------------------
rad_recv: Access-Request packet from host 192.168.100.101:1028, id=9,
length=242 User-Name = "neels(a)localdomain.com"
Digest-Attributes = 0x0a076e65656c73
Digest-Attributes = 0x01116c6f63616c646f6d61696e2e636f6d
Digest-Attributes =
0x022a33663834663638613132613335346339333961656132336366643662323937323636373562353061
Digest-Attributes = 0x04157369703a3139322e3136382e3130302e313031
Digest-Attributes = 0x030a5245474953544552
Digest-Attributes = 0x050661757468
Digest-Attributes = 0x090a3030303030303031
Digest-Attributes = 0x080b616263646566676869
Digest-Response = "dc13b2beeb1a0f47bc5cc4cb10b90baa"
Service-Type = IAPP-AP-Check
X-Ascend-PW-Lifetime = 0x6e65656c73
NAS-IP-Address = 192.168.100.101
NAS-Port = 5060
modcall: entering group authorize
hints: Matched DEFAULT at 52
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "chap" returns noop
rlm_digest: Converting Digest-Attributes to something sane...
Digest-User-Name = "neels"
Digest-Realm = "localdomain.com"
Digest-Nonce = "3f84f68a12a354c939aea23cfd6b29726675b50a"
Digest-URI = "sip:192.168.100.101"
Digest-Method = "REGISTER"
Digest-QOP = "auth"
Digest-Nonce-Count = "00000001"
Digest-CNonce = "abcdefghi"
rlm_digest: Adding Auth-Type = DIGEST
modcall[authorize]: module "digest" returns ok
rlm_realm: No '@' in User-Name = "neels", looking up realm NULL
rlm_realm: Found realm "NULL"
rlm_realm: Setting Stripped-User-Name = "neels"
rlm_realm: Proxying request from user neels to realm NULL
rlm_realm: Adding Realm = "NULL"
rlm_realm: Authentication realm is LOCAL.
modcall[authorize]: module "suffix" returns noop
radius_xlat: 'neels(a)localdomain.com'
rlm_sql (sql): sql_set_user escaped user --> 'neels(a)localdomain.com'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE
STRCMP(Username, 'neels(a)localdomain.com') = 0 ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE STRCMP(usergroup.Username,
'neels(a)localdomain.com') = 0 AND usergroup.GroupName =
radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE
STRCMP(Username, 'neels(a)localdomain.com') = 0 ORDER BY id'
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE
STRCMP(usergroup.Username, 'neels(a)localdomain.com') = 0 AND
usergroup.GroupName
= radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns ok
modcall[authorize]: module "mschap" returns noop
modcall: group authorize returns ok
rad_check_password: Found Auth-Type digest
auth: type "digest"
modcall: entering group authenticate
A1 = neels:localdomain.com:neels
A2 = REGISTER:sip:192.168.100.101
KD =
7df128e232c99839ca01e908858d8b4c:3f84f68a12a354c939aea23cfd6b29726675b50a:00000001:abcdefghi:auth:c78a6e92da40f0ac7487471944b929c0
modcall[authenticate]: module "digest" returns ok
modcall: group authenticate returns ok
Login OK: [neels/<no User-Password attribute>] (from client ser port 5060)
Sending Access-Accept of id 9 to 192.168.100.101:1028
Service-Type := IAPP-Register
Framed-Protocol := PPP
Framed-Compression := Van-Jacobson-TCP-IP
Framed-MTU := 1500
Finished request 0
Going to the next request
-------------------------------------------------------
we need to start and stop the radius accounting. but ser does not make the
accounting request to radius.
can you help me for radius accounting?
thanks with regards.
Xten India.
---------------------------------
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
I suggest you re-enable
#if (loose_route()) {
#t_relay();
#break;
#};
and
reverse the my-domain test to uri==myself
#if (uri==myself) {
if (uri=~"ford.com") {
-jiri
At 04:11 PM 10/10/2003, Rork, Joseph (J.P.) wrote:
>User 1 and User 2 are using Messenger 4.7. User 1 is online. User 2 logs on and SUBSCRIBEs to User 1's presence. OK's go back, and a NOTIFY is sent from User 1 to User 2, but the proxy sends back a 483 too many hops. My config file is set up to be stupid about this, so it should send it right through.
>
>Is there anything else that should be set up to make this work? It was my understanding that Messenger communicates that information from UA to UA and that the proxy is just dumb in this matter. I had no problem with this in the 8.10 version of SER, but I've had it since I upgraded to 8.11.
>
>--joe
>
><<sipdump.txt>> <<ser.cfg>>
>
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/
