On Tue, Sep 30, 2008 at 11:15 AM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:

Hello,

On 09/30/08 13:11, Asim Riaz wrote:

...

Hi, my openser.cfg is configured for childern=4, but I am seeing child processes?

I don't get the problem/question... maybe you can rephrase.

Cheers, Daniel

-- Daniel-Constantin Mierla http://www.asipto.com

my mistake, openser.cfg is configured for childern=4, but I am seeing 8 processes when run ps -faux.

Thanks Asim

On Tue, Sep 30, 2008 at 11:38 AM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:

On 09/30/08 13:33, Asim Riaz wrote:

...

On Tue, Sep 30, 2008 at 11:15 AM, Daniel-Constantin Mierla < miconda@gmail.com mailto:miconda@gmail.com> wrote:

Hello,

On 09/30/08 13:11, Asim Riaz wrote:

   Hi,
   my openser.cfg is configured for childern=4, but I am seeing
   child processes?

I don't get the problem/question... maybe you can rephrase.

Cheers, Daniel

-- Daniel-Constantin Mierla http://www.asipto.com

my mistake, openser.cfg is configured for childern=4, but I am seeing 8 processes when run ps -faux.

kamailio/openser creates for each listening interface same number of chlildren, so if it listens on two ip/port, then you will get 2*children worker processes.

Apart of this, there are couple of special processes, such as timer, attendant, fifo/mi listener...

To get the real meaning for each process, execute:

'openserctl ps' (or 'kamctl ps' if you use 1.4.x or newer) -- you need mi_fifo module loaded and configured.

Cheers, Daniel

-- Daniel-Constantin Mierla http://www.asipto.com

Thanks, thats fine now, although I was listening on only one IP but there was four more processes for TCP.

Asim Riaz wrote:

On Tue, Sep 30, 2008 at 11:38 AM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:

On 09/30/08 13:33, Asim Riaz wrote:



    On Tue, Sep 30, 2008 at 11:15 AM, Daniel-Constantin Mierla
    <miconda@gmail.com <mailto:miconda@gmail.com>
    <mailto:miconda@gmail.com <mailto:miconda@gmail.com>>> wrote:

       Hello,


       On 09/30/08 13:11, Asim Riaz wrote:

           Hi,
           my openser.cfg is configured for childern=4, but I am
    seeing
           child processes?

       I don't get the problem/question... maybe you can rephrase.

       Cheers,
       Daniel

       --    Daniel-Constantin Mierla
       http://www.asipto.com


    my mistake,
    openser.cfg is configured for childern=4, but I am seeing 8
    processes when run ps -faux.

kamailio/openser creates for each listening interface same number
of chlildren, so if it listens on two ip/port, then you will get
2*children worker processes.

Apart of this, there are couple of special processes, such as
timer, attendant, fifo/mi listener...

To get the real meaning for each process, execute:

'openserctl ps' (or 'kamctl ps' if you use 1.4.x or newer) -- you
need mi_fifo module loaded and configured.


Cheers,
Daniel

-- 
Daniel-Constantin Mierla
http://www.asipto.com

Thanks, thats fine now, although I was listening on only one IP but there was four more processes for TCP.

ahh, right, i forgot to explicitly mention it. A listening interface is defined in kamailio by transport protocol, ip address and port.

Cheers, Daniel