You have sent the 200 ok - not the REGISTER
message. I still think that
there will be only 1 Contact in each REGISTER.
Probably the client or/and the NAT is broken:
Which client do you use?
Which NAT do you use?
Do you use STUN?
klaus
Iqbal wrote:
yup, thats what made me jump,
well hers ngrep of when i get a 200OK
SIP/2.0 200 OK.
Via: SIP/2.0/UDP
111.222.333.444:51687;branch=z9hG4bK35d8fac5c0e457cb;rport=50395.
From: <sip:040686@sip.domain.com>;tag=107864afa36620af.
To: <sip:040686@sip.domain.com>;tag=bde2d0f39a3c31098b0c0a337d26256c.e50e.
Call-ID: 55e8c488a0336b09(a)10.0.0.14.
CSeq: 101 REGISTER.
Contact:
<sip:040686@111.222.333.444:51687>;expires=3600;received="sip:111.222.333.444:50395",
<sip:040686@111.222.333.444:48934>;expires=2998;received="sip:111.222.333.444:50395",
<sip:040686@111.222.333.444:34201>;expires=2680;received="sip:111.222.333.444:50395",
<sip:040686@111.222.333.444:63368>;expires=2352;received="sip:111.222.333.444:55174",
<sip:040686@111.222.333.444:47768>;expires=2164;received="sip:111.222.333.444:37787",
<sip:040686@111.222.333.444:33650>;expires=1360;received="sip:111.222.333.444:40862",
<sip:040686@111.222.333.444:46754>;expires=121;received="sip:111.222.333.444:33159",
<sip:040686@111.222.333.444:33159>;expires=26;received="sip:111.222.333.444:62574".
Content-Length: 0.
Warning: 392 123.456.76.87:5060 "Noisy feedback tells: pid=32086
req_src_ip=111.222.333.444 req_src_port=50395
in_uri=sip:sip.domain.com
out_uri=sip:sip.domain.com via_cnt==1".
which is what cause me to use serctl to look at location, and I got
multiple entries.
Havent a clue why this is/was
iqbal
Klaus Darilion wrote:
Are you sure that they really get created at once?
Is there more than
1 Contact in the REGISTER message?
Please post an ngrep dump.
klaus
Iqbal wrote:
>the expire times do vary, the thing is they get all created on
>register at the same time, so I have 4 contacts for a new registers.
>
>Iqbal
>
>Klaus Darilion wrote:
>
>
>>MAybe the NAT binding disappears and a new port will bu used by the
>>NAT device. If you use nathelper, then you will save teh port of the
>>new binding.
>>
>>Do the contacts vary in their expire time?
>> Yes: NAT problem
>> No: ? client problem?
>>
>>klaus
>>
>>Iqbal wrote:
>>
>>
>>>Hi
>>>
>>>I have a really strange problem, when I am registering a IP phone,
>>>which is connected to a simple 4 port router, it i submitting
>>>multiple contacts into the db.
>>>
>>>Even in the sip messages I can see multiple entries, the IP:port
>>>pairs only differ in the port numbers. Anyone else had this problem,
>>>
>>>Iqbal
>>>
>>>_______________________________________________
>>>Serusers mailing list
>>>serusers(a)lists.iptel.org
>>>http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>>
>>
>>.
>>
>
>
.