Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example: subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
But I rewrites succesfully with request_route Flow. Im rewriting it with out any issues
пн, 17 сент. 2018 г., 12:23 Mojtaba mespio@gmail.com:
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example: subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- --Mojtaba Esfandiari.S
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
That is not a safe way to change the To header, since proxies aren't supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t...
-- Sent from mobile. Apologies for brevity and errors.
-----Original Message----- From: Mojtaba mespio@gmail.com To: "Kamailio (SER) - Users Mailing List" sr-users@lists.kamailio.org Sent: Mon, 17 Sep 2018 5:23 AM Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example: subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
I tried uac_replace_to() But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov abalashov@evaristesys.com:
That is not a safe way to change the To header, since proxies aren't supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t...
-- Sent from mobile. Apologies for brevity and errors.
-----Original Message----- From: Mojtaba mespio@gmail.com To: "Kamailio (SER) - Users Mailing List" sr-users@lists.kamailio.org Sent: Mon, 17 Sep 2018 5:23 AM Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example: subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- --Mojtaba Esfandiari.S
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
From which route are you calling uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
I tried uac_replace_to() But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov abalashov@evaristesys.com:
That is not a safe way to change the To header, since proxies aren't supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t...
-- Sent from mobile. Apologies for brevity and errors.
-----Original Message----- From: Mojtaba mespio@gmail.com To: "Kamailio (SER) - Users Mailing List" sr-users@lists.kamailio.org Sent: Mon, 17 Sep 2018 5:23 AM Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example: subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To
Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- --Mojtaba Esfandiari.S
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga pojogas@gmail.com:
From which route are you calling uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
I tried uac_replace_to() But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov abalashov@evaristesys.com:
That is not a safe way to change the To header, since proxies aren't supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t...
-- Sent from mobile. Apologies for brevity and errors.
-----Original Message----- From: Mojtaba mespio@gmail.com To: "Kamailio (SER) - Users Mailing List" sr-users@lists.kamailio.org Sent: Mon, 17 Sep 2018 5:23 AM Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example: subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To
Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- --Mojtaba Esfandiari.S
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga pojogas@gmail.com:
From which route are you calling uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
I tried uac_replace_to() But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov abalashov@evaristesys.com:
That is not a safe way to change the To header, since proxies aren't supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t...
-- Sent from mobile. Apologies for brevity and errors.
-----Original Message----- From: Mojtaba mespio@gmail.com To: "Kamailio (SER) - Users Mailing List" sr-users@lists.kamailio.org Sent: Mon, 17 Sep 2018 5:23 AM Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To
Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- --Mojtaba Esfandiari.S
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
all is default Maybe I need to set up something there? I jsut did not found anything about it at the docs
пн, 17 сент. 2018 г. в 14:42, Sergiu Pojoga pojogas@gmail.com:
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga pojogas@gmail.com:
From which route are you calling uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
I tried uac_replace_to() But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov@evaristesys.com
:
That is not a safe way to change the To header, since proxies aren't supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t...
-- Sent from mobile. Apologies for brevity and errors.
-----Original Message----- From: Mojtaba mespio@gmail.com To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org
Sent: Mon, 17 Sep 2018 5:23 AM Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
Hi I'm building some system with failover trunk but my providers requires to set their doamin in domain part of To
Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER my To filed looks like To: <sip: 123@my.failover.providermy.main.provider> what i tried: Move this change to BRANCH_ROUTE: here tried as $td = as uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants But result is the same kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: d06080 compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- --Mojtaba Esfandiari.S
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi, I didn't understand from your mail if you are calling uac_replace_to() in a branch route also for the first request or only when you hit the failure route. Just in case, you need to call it in a branch route for the initial request too so to have a "clean" message when you run the failure route, otherwise the effect will be the one you observed, kind of garbage in the header.
Best regards,
Federico
On Mon, Sep 17, 2018 at 2:32 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
all is default Maybe I need to set up something there? I jsut did not found anything about it at the docs
пн, 17 сент. 2018 г. в 14:42, Sergiu Pojoga pojogas@gmail.com:
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga pojogas@gmail.com:
From which route are you calling uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
I tried uac_replace_to() But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov@evaristesys.com
:
That is not a safe way to change the To header, since proxies aren't supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t...
-- Sent from mobile. Apologies for brevity and errors.
-----Original Message----- From: Mojtaba mespio@gmail.com To: "Kamailio (SER) - Users Mailing List" < sr-users@lists.kamailio.org> Sent: Mon, 17 Sep 2018 5:23 AM Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko < ovoshlook@gmail.com> wrote: > > Hi > I'm building some system with failover trunk > but my providers requires to set their doamin in domain part of To Header > > so when I rewrite it at the my failure_route > > $td = FAILOVER_PROVIDER > my To filed looks like > To: <sip: 123@my.failover.providermy.main.provider> > what i tried: > Move this change to BRANCH_ROUTE: > here tried as > $td = as > uac_replace_to('',"newToFieldValue) > > Move to the my custom route with both variants > But result is the same > kamailio 5.1 > > version: kamailio 5.1.5 (x86_64/linux) d06080 > flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB > poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. > id: d06080 > compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- --Mojtaba Esfandiari.S
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
hmm Suppose you are correct Makes sence Yes I using on ly in the branch for the failure Thx for tip
пн, 17 сент. 2018 г. в 15:58, Federico Cabiddu federico.cabiddu@gmail.com:
Hi, I didn't understand from your mail if you are calling uac_replace_to() in a branch route also for the first request or only when you hit the failure route. Just in case, you need to call it in a branch route for the initial request too so to have a "clean" message when you run the failure route, otherwise the effect will be the one you observed, kind of garbage in the header.
Best regards,
Federico
On Mon, Sep 17, 2018 at 2:32 PM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
all is default Maybe I need to set up something there? I jsut did not found anything about it at the docs
пн, 17 сент. 2018 г. в 14:42, Sergiu Pojoga pojogas@gmail.com:
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga pojogas@gmail.com:
From which route are you calling uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
I tried uac_replace_to() But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov < abalashov@evaristesys.com>:
> That is not a safe way to change the To header, since proxies aren't > supposed to modify the To or From headers. > > The proper approach conceals the fact that modifications have taken > place from the caller: > > > https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t... > > -- > Sent from mobile. Apologies for brevity and errors. > > -----Original Message----- > From: Mojtaba mespio@gmail.com > To: "Kamailio (SER) - Users Mailing List" < > sr-users@lists.kamailio.org> > Sent: Mon, 17 Sep 2018 5:23 AM > Subject: Re: [SR-Users] issue with rewrite to domain in failure route > > The $td is read-only variable, and yoou could not change it's value. > If you want to change domain in To header, You should use testops > module in kamialio and replace domain in To header. for example: > > subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') > With Regards.Mojtaba > > On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko < > ovoshlook@gmail.com> wrote: > > > > Hi > > I'm building some system with failover trunk > > but my providers requires to set their doamin in domain part of To > Header > > > > so when I rewrite it at the my failure_route > > > > $td = FAILOVER_PROVIDER > > my To filed looks like > > To: <sip: 123@my.failover.providermy.main.provider> > > what i tried: > > Move this change to BRANCH_ROUTE: > > here tried as > > $td = as > > uac_replace_to('',"newToFieldValue) > > > > Move to the my custom route with both variants > > But result is the same > > kamailio 5.1 > > > > version: kamailio 5.1.5 (x86_64/linux) d06080 > > flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, > USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, > PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, > FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, > USE_DST_BLACKLIST, HAVE_RESOLV_RES > > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE > 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB > > poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. > > id: d06080 > > compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 > > _______________________________________________ > > Kamailio (SER) - Users Mailing List > > sr-users@lists.kamailio.org > > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > > -- > --Mojtaba Esfandiari.S > > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Yes you have to configure a few things, most importantly:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.p.restore_mode https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.p.restore_dlg
You have two choices: either you set it to restore from RR or you treat calls with dialog module.
On Mon, Sep 17, 2018 at 8:32 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
all is default Maybe I need to set up something there? I jsut did not found anything about it at the docs
пн, 17 сент. 2018 г. в 14:42, Sergiu Pojoga pojogas@gmail.com:
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga pojogas@gmail.com:
From which route are you calling uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko ovoshlook@gmail.com wrote:
I tried uac_replace_to() But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov@evaristesys.com
:
That is not a safe way to change the To header, since proxies aren't supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_t...
-- Sent from mobile. Apologies for brevity and errors.
-----Original Message----- From: Mojtaba mespio@gmail.com To: "Kamailio (SER) - Users Mailing List" < sr-users@lists.kamailio.org> Sent: Mon, 17 Sep 2018 5:23 AM Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value. If you want to change domain in To header, You should use testops module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig') With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko < ovoshlook@gmail.com> wrote: > > Hi > I'm building some system with failover trunk > but my providers requires to set their doamin in domain part of To Header > > so when I rewrite it at the my failure_route > > $td = FAILOVER_PROVIDER > my To filed looks like > To: <sip: 123@my.failover.providermy.main.provider> > what i tried: > Move this change to BRANCH_ROUTE: > here tried as > $td = as > uac_replace_to('',"newToFieldValue) > > Move to the my custom route with both variants > But result is the same > kamailio 5.1 > > version: kamailio 5.1.5 (x86_64/linux) d06080 > flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB > poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. > id: d06080 > compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0 > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- --Mojtaba Esfandiari.S
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-
Alex Balashov -
Federico Cabiddu -
Mojtaba -
Sergiu Pojoga -
Yuriy Gorlichenko