You have to change the uri to the new, then append_branch. g-)

Shaun Hofer wrote:

When I try to use avp_pushto() in one section of ser.cfg it works and in another section it doesn't. When I use it to out right forward a call it works fine (callfwd). When it's used in the failure_route[1] it doesn't seem to push a value onto ruri (I have made sure that avp_db_load() has been called/used) . I'm wondering if avp_pushto() one of those methods that can't be called from a failed route ?

I get the following error when I use it: ERROR: t_forward_nonack: no branched for forwarding ERROR: w_t_relay (failure mode): forwarding failed ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL)

I tried taking away voicemail section in failure_route[1] and made sure I was phoning extension with a number instead of 'voicemail' in value column of the database. That made no difference. When I tried adding append_branch() after avp_pushto() it just ends up ringing the original phone number again.

Thanks in advance -Shaun

route[1] { # ---------------------------------------------------------- # Default Message Handler # ---------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[3] { # ---------------------------------------------------------- # INVITE Message Handler # ---------------------------------------------------------- if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); }; if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (avp_db_load("$ruri/username", "s:callfwd")) { setflag(22); avp_pushto("$ruri", "s:callfwd"); route(6); break; }; if (!lookup("location")) { if (uri=~"^sip:0[1-9][0-9]{8}") { # Domestic PSTN route(4); route(5); break; }; sl_send_reply("404", "User Not Found"); break; }; if (avp_db_load("$ruri/username", "s:fwdnoanswer")) { if (!avp_check("s:fwdnoanswer", "eq/$ruri/i")) { setflag(27);

            };
    };
    log(1,"t on fail \n");
    t_on_failure("1");
    route(4);
    route(1);

}

route[4] { # ---------------------------------------------------------- # NAT Traversal Section # ---------------------------------------------------------- if (isflagset(6) || isflagset(7) || isflagset(11)) { if (!isflagset(8)) { setflag(8); use_media_proxy(); }; }; }

route[6] { # ---------------------------------------------------------- # Call Forwarding Handler # ---------------------------------------------------------- lookup("aliases"); if (uri!=myself) { if (!isflagset(22)) { append_branch(); }; route(4); route(1); break; }; if (!lookup("location")) { if (uri=~"^sip:88[0-9]{8}") { # Offline VoIP Network user sent to * for voicemail route(4); route(5); break; }; sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); }

failure_route[1] { if (t_check_status("487")) { break; }; if (isflagset(26) && t_check_status("408")) { if (avp_check("s:fwdnoanswer","eq/voicemail/I")) { avp_delete("s:fwdnoanswer"); resetflag(26); revert_uri(); rewritehostport("x.x.x.x:5060");#goto voicemail server append_branch(); t_relay_to_udp("x.x.x.x", "5060"); break; } else { avp_pushto("$ruri", "s:fwdnoanswer"); avp_delete("s:fwdnoanswer"); resetflag(26); route(6); break; }; };

    end_media_session();

}

---

Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers