23 Nov
2004
23 Nov
'04
11:03 a.m.
Hi All,
Could you help me whit "auth_module"?
I compiled "radiusclient-0.4.6" and "ser-0.8.14" with auth_radius
module.
But when i insert module "auth_radius" in ser.cfg file I get this
message "Starting SER : cat: /var/run/ser.pid: No such file or
directory"
Could you advice me, pls.
10x in advance!
23 Nov
23 Nov
3:14 p.m.
New subject: [Serusers] 4 Line IP phones (None Cisco)
Hi All,
Does anyone of you use/know about 4 line SIP phones
(hard phone)?
We are using Cisco 7960 (6 lines) and looking for a
cheaper phone with 4/6 lines.
Can you suggest anything?
Many thanks.
Regards,
Suvendu.
________________________________________________________________________
Yahoo! India Matrimony: Find your life partner online
Go to: http://yahoo.shaadi.com/india-matrimony
4:02 p.m.
New subject: [Serusers] 4 Line IP phones (None Cisco)
Suvendu Sethi wrote:
Hi All,
Does anyone of you use/know about 4 line SIP phones
(hard phone)?
We are using Cisco 7960 (6 lines) and looking for a
cheaper phone with 4/6 lines.
SNOM 200 supports several lines. They are cheaper, but little bit tricky
to configure.
klaus
4:24 p.m.
New subject: [Serusers] 4 Line IP phones (None Cisco)
Tricky in what way?
-Steve
Klaus Darilion wrote:
Suvendu Sethi wrote:
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-8001
fax: 215-898-9348
sip:blairs@upenn.edu
Hi All,
Does anyone of you use/know about 4 line SIP phones
(hard phone)?
We are using Cisco 7960 (6 lines) and looking for a
cheaper phone with 4/6 lines.
SNOM 200 supports several lines. They are cheaper, but little bit
tricky to configure.
klaus
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers 
25 Nov
25 Nov
9:21 p.m.
Check the logs to see why ser does not start (also use debug=4 in the
configuration file to get more information).
Jan.
On 23-11 12:03, Todor Milenkov wrote:
Hi All,
Could you help me whit "auth_module"?
I compiled "radiusclient-0.4.6" and "ser-0.8.14" with auth_radius
module.
But when i insert module "auth_radius" in ser.cfg file I get this
message "Starting SER : cat: /var/run/ser.pid: No such file or
directory"
Could you advice me, pls.
10x in advance!
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7111
days inactive
7114
days old
5 comments
6 participants
participants (6)
-
Jan Janak -
Juha Heinanen -
Klaus Darilion -
Steve Blair -
Suvendu Sethi -
Todor Milenkov