Hi all, i'm newbie in SER, I want to route RTP packets between 2 computers with x-lite client voip in the same network through Mediaproxy. I know this may have no sense, but it's just a test configuration. The call use_media_proxy() seems to have no effect, the RTP packets go directly from one computer to another, no packet trough Mediaproxy. This is my environment: SER and Mediaproxy on the same PC (192.168.123.186) X-lite client_A running on 192.168.123.10 X-lite client_B running on 192.168.123.168 Client_A call Client_B that accept, but mediaproxy refuses to proxy the call. This is my ser.cfg # ----------- global configuration parameters ------------------------ debug=3 # debug level listen=192.168.123.186 port=5060 log_facility=LOG_LOCAL6 fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser: heslo@localhost/ser" # ------------------ module loading ---------------------------------- loadmodule "/usr/local1/lib/ser/modules/mysql.so" loadmodule "/usr/local1/lib/ser/modules/sl.so" loadmodule "/usr/local1/lib/ser/modules/tm.so" loadmodule "/usr/local1/lib/ser/modules/rr.so" loadmodule "/usr/local1/lib/ser/modules/maxfwd.so" loadmodule "/usr/local1/lib/ser/modules/usrloc.so" loadmodule "/usr/local1/lib/ser/modules/registrar.so" loadmodule "/usr/local1/lib/ser/modules/textops.so" loadmodule "/usr/local1/lib/ser/modules/uri.so" loadmodule "/usr/local1/lib/ser/modules/uri_db.so" loadmodule "/usr/local1/lib/ser/modules/domain.so" loadmodule "/usr/local1/lib/ser/modules/auth.so" loadmodule "/usr/local1/lib/ser/modules/auth_db.so" #MEDIA PROXY module needed loadmodule "/usr/local1/lib/ser/modules/mediaproxy.so" loadmodule "/usr/local1/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 2) # -- auth params -- modparam ("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") #SQL settings modparam("auth_db", "db_url", "mysql://ser: heslo@localhost/ser") modparam("usrloc", "db_url", "mysql://ser: heslo@localhost/ser") #MEDIAPROXY settings #--------------------------- # configurazione moduli #--------------------------- modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy"," natping_interval", 30) modparam("mediaproxy","mediaproxy_socket"," /var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics"," /usr/local1/etc/ser/sip-clients") modparam("mediaproxy"," rtp_asymmetrics","/usr/local1/etc/ser/rtp-clients") modparam ("registrar", "nat_flag", 6) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol #if (method=="INVITE" && client_nat_test("3")) { # record_route_preset("192.168.123.186:5060;nat=yes"); #} else if (method!="REGISTER") { # record_route(); #}; if (method=="INVITE" ) { if (client_nat_test("3")) { record_route_preset("192.168.123.186:5060; nat=yes"); } else record_route_preset ("192.168.123.186"); } else if (method!="REGISTER") { record_route(); }; if (method==" BYE" || method=="CANCEL") { end_media_session(); }; # subsequent messages withing a dialog should take the # path determined by record-routing # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply ("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; if (!uri==myself) { route(4); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method==" REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact: [ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri! =myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (! isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search ("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } And this is Mediaproxy Log: Listening for commands on local socket `/var/run/mediaproxy.sock' Listening for remote commands on `192. 168.123.186:25060' Remote commands are allowed from: 192.168.123.186, 127.0.0.1 Using IP address `192.168.123.186' for the RTP/RTCP proxy request B390Opu7cB 192.168.123.168:25500:audio 192.168.123.168 sip. antech.it local 192.168.123.186 remote unknown-agent info=from: orazio@sip.antech.it,to:j2me@sip.antech.it, fromtag:As94,totag: session B390Opu7cB: started. listening on 192.168.123.186:52010 execution time: 1.71 ms lookup B390Opu7cB 192.168.123.186:25500:audio 192.168.123.186 sip.antech.it local sip.antech.it unknown unknown-agent info=from:orazio@sip.antech.it,to:j2me@sip.antech.it,fr omtag:As94, totag:oePf execution time: 0.57 ms session B390Opu7cB: caller signed in from 192.168.123.168:25500 (RTP) (will return to 192.168.123.168: 25500) status execution time: 0.14 ms session B390Opu7cB: 2/0/0 packets, 344/0/0 bytes (caller/called/relayed) session B390Opu7cB: ended (did timeout). delete B390Opu7cB info= execution time: 0.14 ms and this is dump of session.py [root@sip mediaproxy]# ./sessions.py Caller Via Called Status Duration Codec Type Traffic ---------------------------------------------------------------------------------------------------- 192.168.123.168:25500 - 192.168.123.186:52010 - ?.?.?.?:? inactive 0'32" GSM Audio 344/0/0 Total traffic: 0bps/0bps/0bps (in1/in2/out) Session count: 1 Proxy version: 1.9.0 Is mediaproxy working just between different networks or it's an error in my configuration file? Please help me. Any suggestions? Orazio