Shown below is my ser.cfg file. For some reason the nat_uac_test routine doesn't work. The debugging says it doesn't know the command and believes I left out a module. I can't find much documentation on this command. Did I leave out a module or something required to use this? Bill # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/lib/ser/modules/mysql.so" loadmodule "/lib/ser/modules/sl.so" loadmodule "/lib/ser/modules/tm.so" loadmodule "/lib/ser/modules/maxfwd.so" loadmodule "/lib/ser/modules/registrar.so" loadmodule "/lib/ser/modules/auth.so" # loadmodule "/lib/ser/modules/textops.so" # loadmodule "/lib/ser/modules/enum.so" loadmodule "/lib/ser/modules/group.so" loadmodule "/lib/ser/modules/nathelper.so" modparam("nathelper", "natping_interval", 10) # loadmodule "/lib/ser/modules/vm.so" # modparam("vm", "db_url", "sql://root:@127.0.0.1/ser") # modparam("vm", "email_column", "sip(a)xxx.xxx.net

# modparam("vm", "domain_column", "ser.vci.net") loadmodule "/lib/ser/modules/acc.so" modparam("acc", "db_url", "sql://root:@127.0.0.1/ser") modparam("acc", "log_missed_flag", 2) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 2) modparam("acc", "db_missed_flag", 2) loadmodule "/lib/ser/modules/usrloc.so" modparam("usrloc", "db_mode", 0) modparam("usrloc", "db_mode", 2) loadmodule "/lib/ser/modules/auth_db.so" modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") loadmodule "/lib/ser/modules/rr.so" modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; if (nat_uac_test("3")) { log("1,Connection from someone behind a NAT"); }; if (uri =~ "^sip:admin" ) { log(1, "Connection from admin(a)xxx.xxx.net <mailto:admin@xxx.xxx.net>"); }; if (method=="CANCEL") { log(1,"Sent CANCEL request"); } if (method=="INVITE") { log(1,"Sent INVITE request"); } # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; setflag(2); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { log(1,"processing request for ser.vci.net domain"); if (method=="REGISTER") { log(1,"register request for xxx.xxx.net domain"); if (!www_authorize("xxx.xxx.net", "subscriber")) { www_challenge("ser.vci.net", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { log(1,"404 - Not Found"); acc_db_request("404 Not Found", "acc"); sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { log(1,"not sure what this does"); sl_reply_error(); }; } ------------------------------------------------------------------------ _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers