27 Feb
2006
27 Feb
'06
6:22 p.m.
Says that pid file was not found and ser could not start (usual serctl
message if ser fails to start).. Btw, Im using ser_0.9.3.
I understand that I can start SER w/o serctl, but I am just curious
why is it happening...
Eagerly waiting for your reply :))
Andrey.
On 2/27/06, Christian Thomas <cthomas(a)canalwest.com> wrote:
Hi,
What error did you get ?
Christian
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of Andrey Kouprianov
Sent: segunda-feira, 27 de fevereiro de 2006 10:17
To: serusers(a)lists.iptel.org
Subject: [Serusers] "Getting Started" configs
Hello everyone!
I have a small question. Why would not SER start with "serctl start"
command, if I am using configurations from getting started document?
(im not talking about the first config, but the latter ones).
Andrey.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
27 Feb
27 Feb
6:26 p.m.
New subject: [Serusers] "Getting Started" configs
You must forgive me... The mediaproxy example is working fine,
however, think it's the second example (with INVITES and REGISTERs)
that gives the error
On 2/27/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
Says that pid file was not found and ser could not
start (usual serctl
message if ser fails to start).. Btw, Im using ser_0.9.3.
I understand that I can start SER w/o serctl, but I am just curious
why is it happening...
Eagerly waiting for your reply :))
Andrey.
On 2/27/06, Christian Thomas <cthomas(a)canalwest.com> wrote:
Hi,
What error did you get ?
Christian
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of Andrey Kouprianov
Sent: segunda-feira, 27 de fevereiro de 2006 10:17
To: serusers(a)lists.iptel.org
Subject: [Serusers] "Getting Started" configs
Hello everyone!
I have a small question. Why would not SER start with "serctl start"
command, if I am using configurations from getting started document?
(im not talking about the first config, but the latter ones).
Andrey.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6:27 p.m.
New subject: [Serusers] "Getting Started" configs
Actually, it just stalls and does nothing until i ctrl+C it. And then
it would show that PID file not found message.
On 2/27/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
You must forgive me... The mediaproxy example is
working fine,
however, think it's the second example (with INVITES and REGISTERs)
that gives the error
On 2/27/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
Says that pid file was not found and ser could
not start (usual serctl
message if ser fails to start).. Btw, Im using ser_0.9.3.
I understand that I can start SER w/o serctl, but I am just curious
why is it happening...
Eagerly waiting for your reply :))
Andrey.
On 2/27/06, Christian Thomas <cthomas(a)canalwest.com> wrote:
Hi,
What error did you get ?
Christian
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of Andrey Kouprianov
Sent: segunda-feira, 27 de fevereiro de 2006 10:17
To: serusers(a)lists.iptel.org
Subject: [Serusers] "Getting Started" configs
Hello everyone!
I have a small question. Why would not SER start with "serctl start"
command, if I am using configurations from getting started document?
(im not talking about the first config, but the latter ones).
Andrey.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
8:02 p.m.
New subject: [Serusers] "Getting Started" configs
Check your system logs (/var/log/messages) for more detailed messages about
what's causing the problem.
N.
On Mon, 27 Feb 2006 23:27:33 +0700, Andrey Kouprianov wrote
Actually, it just stalls and does nothing until i
ctrl+C it. And then
it would show that PID file not found message.
On 2/27/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
You must forgive me... The mediaproxy example is
working fine,
however, think it's the second example (with INVITES and REGISTERs)
that gives the error
On 2/27/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers Says that pid file was not found and ser could
not start (usual serctl
message if ser fails to start).. Btw, Im using ser_0.9.3.
I understand that I can start SER w/o serctl, but I am just curious
why is it happening...
Eagerly waiting for your reply :))
Andrey.
On 2/27/06, Christian Thomas <cthomas(a)canalwest.com> wrote:
Hi,
What error did you get ?
Christian
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of Andrey Kouprianov
Sent: segunda-feira, 27 de fevereiro de 2006 10:17
To: serusers(a)lists.iptel.org
Subject: [Serusers] "Getting Started" configs
Hello everyone!
I have a small question. Why would not SER start with "serctl start"
command, if I am using configurations from getting started document?
(im not talking about the first config, but the latter ones).
Andrey.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
28 Feb
28 Feb
2:41 p.m.
New subject: [Serusers] "Getting Started" configs
There are no messages at all... Is it because "fork" is set to "no"?
Apparently, ser would start with ser -E -D as described in the
gettingstarted05.pdf document.
On 2/28/06, sip <sip(a)arcdiv.com> wrote:
Check your system logs (/var/log/messages) for more
detailed messages about
what's causing the problem.
N.
On Mon, 27 Feb 2006 23:27:33 +0700, Andrey Kouprianov wrote
Actually, it just stalls and does nothing until i
ctrl+C it. And then
it would show that PID file not found message.
On 2/27/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
You must forgive me... The mediaproxy example is
working fine,
however, think it's the second example (with INVITES and REGISTERs)
that gives the error
On 2/27/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers Says that pid file was not found and ser could
not start (usual serctl
message if ser fails to start).. Btw, Im using ser_0.9.3.
I understand that I can start SER w/o serctl, but I am just curious
why is it happening...
Eagerly waiting for your reply :))
Andrey.
On 2/27/06, Christian Thomas <cthomas(a)canalwest.com> wrote:
> Hi,
>
> What error did you get ?
>
> Christian
>
> -----Original Message-----
> From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@iptel.org]On
> Behalf Of Andrey Kouprianov
> Sent: segunda-feira, 27 de fevereiro de 2006 10:17
> To: serusers(a)lists.iptel.org
> Subject: [Serusers] "Getting Started" configs
>
>
> Hello everyone!
>
> I have a small question. Why would not SER start with "serctl start"
> command, if I am using configurations from getting started document?
> (im not talking about the first config, but the latter ones).
>
> Andrey.
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
6848
days inactive
6849
days old
4 comments
2 participants
participants (2)
-
Andrey Kouprianov -
sip