15 May
2021
15 May
'21
3:21 p.m.
Hi.
I've been aware of Kamailio, and on this list, for several years, but so far I
have not implemented Kamailio for any purpose.
I wonder if it could be a suitable tool for the following scenario.
I currently use Asterisk to register as a client, with username and password,
to other SIP PBXs in order to receive calls. As far as the other PBX is
concerned, Asterisk looks like a SIP telephone on a particular extension.
However, Asterisk's SIP client capabilities are limited to handling phone
calls only, and it specifically cannot receive presence information about the
state of other extensions from the remote PBX.
So, could Kamailio be used in the path between Asterisk and the remote PBX so
that the registration on the PBX comes from Kamailio (with any incoming calls
being passed to Asterisk), but with Kamailio also receiving presence
information from the remote PBX and making this available to some script or
application (which I would expect to have to write)?
The main point is that I don't want to have two things registering to the
remote PBX, one for calls and one for presence, so I'm looking for a way to
register with something which understands presence, and can also pass calls on
to Asterisk.
Can anyone suggest whether Kamailio could do this, and if so, point me at some
resources to help me get started; or alternatively suggest ideas on some other
tool which might be more appropriate than Kamailio?
Thanks for any ideas,
Antony.
--
Schrödinger's rule of data integrity: the condition of any backup is unknown
until a restore is attempted.
Please reply to the list;
please *don't* CC me.
15 May
15 May
10:49 p.m.
Absolutely yes, In Kamailio with specific module you could do it. Some
related module for doing this scenario are:
presence, presence_xml, presence_dialoginfo, pua, pua_dialoginfo
You could know more about them by referring to its documentation.
With Best Regards
Mojtaba Esfandiari.S
On Sat, May 15, 2021 at 5:52 PM Antony Stone <
Antony.Stone(a)kamailio.open.source.it> wrote:
Hi.
I've been aware of Kamailio, and on this list, for several years, but so
far I
have not implemented Kamailio for any purpose.
I wonder if it could be a suitable tool for the following scenario.
I currently use Asterisk to register as a client, with username and
password,
to other SIP PBXs in order to receive calls. As far as the other PBX is
concerned, Asterisk looks like a SIP telephone on a particular extension.
However, Asterisk's SIP client capabilities are limited to handling phone
calls only, and it specifically cannot receive presence information about
the
state of other extensions from the remote PBX.
So, could Kamailio be used in the path between Asterisk and the remote PBX
so
that the registration on the PBX comes from Kamailio (with any incoming
calls
being passed to Asterisk), but with Kamailio also receiving presence
information from the remote PBX and making this available to some script
or
application (which I would expect to have to write)?
The main point is that I don't want to have two things registering to the
remote PBX, one for calls and one for presence, so I'm looking for a way
to
register with something which understands presence, and can also pass
calls on
to Asterisk.
Can anyone suggest whether Kamailio could do this, and if so, point me at
some
resources to help me get started; or alternatively suggest ideas on some
other
tool which might be more appropriate than Kamailio?
Thanks for any ideas,
Antony.
--
Schrödinger's rule of data integrity: the condition of any backup is
unknown
until a restore is attempted.
Please reply to the
list;
please *don't* CC
me.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
18 May
18 May
12:51 p.m.
On Saturday 15 May 2021 at 22:49:01, Mojtaba wrote:
Absolutely yes, In Kamailio with specific module you
could do it. Some
related module for doing this scenario are:
presence, presence_xml, presence_dialoginfo, pua, pua_dialoginfo
You could know more about them by referring to its documentation.
Thanks for the confirmation; I'm sure the details you provide will make more
sense to me once I'm at a stage where I can use them.
In the meantime, I assume that the other part of my requirement - getting
Kamailio to pass through client registrations from Asterisk to a remote PBX -
is a far more standard setup - where can I find configuration guidelines on how
to do this, given that I've never implemented Kamailio so far?
Thanks,
On Sat, May 15, 2021 at 5:52 PM Antony Stone wrote:
> Hi.
>
> I've been aware of Kamailio, and on this list, for several years, but so
> far I have not implemented Kamailio for any purpose.
>
> I wonder if it could be a suitable tool for the following scenario.
>
> I currently use Asterisk to register as a client, with username and
> password, to other SIP PBXs in order to receive calls. As far as the
> other PBX is concerned, Asterisk looks like a SIP telephone on a
> particular extension.
>
> However, Asterisk's SIP client capabilities are limited to handling phone
> calls only, and it specifically cannot receive presence information about
> the state of other extensions from the remote PBX.
>
> So, could Kamailio be used in the path between Asterisk and the remote
> PBX so that the registration on the PBX comes from Kamailio (with any
> incoming calls being passed to Asterisk), but with Kamailio also receiving
> presence information from the remote PBX and making this available to some
> script or application (which I would expect to have to write)?
>
> The main point is that I don't want to have two things registering to the
> remote PBX, one for calls and one for presence, so I'm looking for a way
> to register with something which understands presence, and can also pass
> calls on to Asterisk.
>
> Can anyone suggest whether Kamailio could do this, and if so, point me at
> some resources to help me get started; or alternatively suggest ideas on
> some other tool which might be more appropriate than Kamailio?
>
>
> Thanks for any ideas,
>
>
> Antony.
--
This sentence contains exacly three erors.
Please reply to the list;
please *don't* CC me.
21 May
21 May
4:07 p.m.
Hi.
I think maybe I asked this question at a busy time, when people were dealing
with other questions.
Can anyone point me at the appropriate documentation on how to get Kamailio
set up to pass client registrations through to a remote PBX?
I'm assuming this is a pretty basic use case, but I haven't yet found a simple
guide.
Thanks in advance.
On Tuesday 18 May 2021 at 12:51:21, Antony Stone wrote:
On Saturday 15 May 2021 at 22:49:01, Mojtaba wrote:
--
Pavlov is in the pub enjoying a pint.
The barman rings for last orders, and Pavlov jumps up exclaiming "Damn! I
forgot to feed the dog!"
Please reply to the list;
please *don't* CC me.
Absolutely yes, In Kamailio with specific module
you could do it. Some
related module for doing this scenario are:
presence, presence_xml, presence_dialoginfo, pua, pua_dialoginfo
You could know more about them by referring to its documentation.
Thanks for the confirmation; I'm sure the details you provide will make
more sense to me once I'm at a stage where I can use them.
In the meantime, I assume that the other part of my requirement - getting
Kamailio to pass through client registrations from Asterisk to a remote PBX
- is a far more standard setup - where can I find configuration guidelines
on how to do this, given that I've never implemented Kamailio so far?
Thanks,
> On Sat, May 15, 2021 at 5:52 PM Antony Stone wrote:
> > Hi.
> >
> > I've been aware of Kamailio, and on this list, for several years, but
> > so far I have not implemented Kamailio for any purpose.
> >
> > I wonder if it could be a suitable tool for the following scenario.
> >
> > I currently use Asterisk to register as a client, with username and
> > password, to other SIP PBXs in order to receive calls. As far as the
> > other PBX is concerned, Asterisk looks like a SIP telephone on a
> > particular extension.
> >
> > However, Asterisk's SIP client capabilities are limited to handling
> > phone calls only, and it specifically cannot receive presence
> > information about the state of other extensions from the remote PBX.
> >
> > So, could Kamailio be used in the path between Asterisk and the remote
> > PBX so that the registration on the PBX comes from Kamailio (with any
> > incoming calls being passed to Asterisk), but with Kamailio also
> > receiving presence information from the remote PBX and making this
> > available to some script or application (which I would expect to have
> > to write)?
> >
> > The main point is that I don't want to have two things registering to
> > the remote PBX, one for calls and one for presence, so I'm looking for
> > a way to register with something which understands presence, and can
> > also pass calls on to Asterisk.
> >
> > Can anyone suggest whether Kamailio could do this, and if so, point me
> > at some resources to help me get started; or alternatively suggest
> > ideas on some other tool which might be more appropriate than
> > Kamailio?
> >
> >
> > Thanks for any ideas,
> >
> >
> > Antony. 
4:14 p.m.
Hi,
If your remote PBX support path header, then easiest way would be to use
Path module of Kamailio:
https://www.kamailio.org/docs/modules/devel/modules/path.html
Jurijs
On Fri, May 21, 2021 at 5:09 PM Antony Stone <
Antony.Stone(a)kamailio.open.source.it> wrote:
Hi.
I think maybe I asked this question at a busy time, when people were
dealing
with other questions.
Can anyone point me at the appropriate documentation on how to get
Kamailio
set up to pass client registrations through to a remote PBX?
I'm assuming this is a pretty basic use case, but I haven't yet found a
simple
guide.
Thanks in advance.
On Tuesday 18 May 2021 at 12:51:21, Antony Stone wrote:
On Saturday 15 May 2021 at 22:49:01, Mojtaba
wrote:
PBX
Absolutely yes, In Kamailio with specific module
you could do it. Some
related module for doing this scenario are:
presence, presence_xml, presence_dialoginfo, pua, pua_dialoginfo
You could know more about them by referring to its documentation.
Thanks for the confirmation; I'm sure the details you provide will make
more sense to me once I'm at a stage where I can use them.
In the meantime, I assume that the other part of my requirement - getting
Kamailio to pass through client registrations from Asterisk to a remote - is a far more standard setup - where can I find
configuration
guidelines
on how to do this, given that I've never
implemented Kamailio so far?
Thanks,
> On Sat, May 15, 2021 at 5:52 PM Antony Stone wrote:
> > Hi.
> >
> > I've been aware of Kamailio, and on this list, for several years, but
> > so far I have not implemented Kamailio for any purpose.
> >
> > I wonder if it could be a suitable tool for the following scenario.
> >
> > I currently use Asterisk to register as a client, with username and
> > password, to other SIP PBXs in order to receive calls. As far as the
> > other PBX is concerned, Asterisk looks like a SIP telephone on a
> > particular extension.
> >
> > However, Asterisk's SIP client capabilities are limited to handling
> > phone calls only, and it specifically cannot receive presence
> > information about the state of other extensions from the remote PBX.
> >
> > So, could Kamailio be used in the path between Asterisk and the
remote
> > PBX so that the registration on the PBX
comes from Kamailio (with any
> > incoming calls being passed to Asterisk), but with Kamailio also
> > receiving presence information from the remote PBX and making this
> > available to some script or application (which I would expect to have
> > to write)?
> >
> > The main point is that I don't want to have two things registering to
> > the remote PBX, one for calls and one for presence, so I'm looking
for
> > a way to register with something which
understands presence, and can
> > also pass calls on to Asterisk.
> >
> > Can anyone suggest whether Kamailio could do this, and if so, point
me
> > at some resources to help me get
started; or alternatively suggest
> > ideas on some other tool which might be more appropriate than
> > Kamailio?
> >
> >
> > Thanks for any ideas,
> >
> >
> > Antony.
--
Pavlov is in the pub enjoying a pint.
The barman rings for last orders, and Pavlov jumps up exclaiming "Damn! I
forgot to feed the dog!"
Please reply to the
list;
please *don't* CC
me.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
4:30 p.m.
On Friday 21 May 2021 at 16:14:06, Jurijs Ivolga wrote:
Hi,
If your remote PBX support path header,
That is something I cannot tell, since the PBXs I shall be registering to are
operated by customers and/or their service providers. All I know are the SIP
credentials to register with.
Is path header a common thing for PBXs to support or not support?
then easiest way would be to use Path module of
Kamailio:
https://www.kamailio.org/docs/modules/devel/modules/path.html
Hm, that seems like comprehensive documentation about a specific module, but
how does this fit into a bigger picture?
As I said, I have never implemented Kamailio so far, so I'm looking for a
guide which shows me how to set up something which I hope is quite basic
(forwarding client SIP registrations), starting from when I have installed
Kamailio on a machine.
Thanks,
On Fri, May 21, 2021 at 5:09 PM Antony Stone wrote:
> Hi.
>
> I think maybe I asked this question at a busy time, when people were
> dealing with other questions.
>
> Can anyone point me at the appropriate documentation on how to get
> Kamailio set up to pass client registrations through to a remote PBX?
>
> I'm assuming this is a pretty basic use case, but I haven't yet found a
> simple guide.
>
>
> Thanks in advance.
>
> On Tuesday 18 May 2021 at 12:51:21, Antony Stone wrote:
> > On Saturday 15 May 2021 at 22:49:01, Mojtaba wrote:
> > > Absolutely yes, In Kamailio with specific module you could do it.
> > > Some related module for doing this scenario are:
> > > presence, presence_xml, presence_dialoginfo, pua, pua_dialoginfo
> > > You could know more about them by referring to its documentation.
> >
> > Thanks for the confirmation; I'm sure the details you provide will make
> > more sense to me once I'm at a stage where I can use them.
> >
> > In the meantime, I assume that the other part of my requirement -
> > getting Kamailio to pass through client registrations from Asterisk to
> > a remote PBX - is a far more standard setup - where can I find
> > configuration guidelines on how to do this, given that I've never
> > implemented Kamailio so far?
> >
> >
> > Thanks,
> >
> > > On Sat, May 15, 2021 at 5:52 PM Antony Stone wrote:
> > > > Hi.
> > > >
> > > > I've been aware of Kamailio, and on this list, for several
years,
> > > > but so far I have not implemented Kamailio for any purpose.
> > > >
> > > > I wonder if it could be a suitable tool for the following scenario.
> > > >
> > > > I currently use Asterisk to register as a client, with username and
> > > > password, to other SIP PBXs in order to receive calls. As far as
> > > > the other PBX is concerned, Asterisk looks like a SIP telephone on
> > > > a particular extension.
> > > >
> > > > However, Asterisk's SIP client capabilities are limited to
handling
> > > > phone calls only, and it specifically cannot receive presence
> > > > information about the state of other extensions from the remote
> > > > PBX.
> > > >
> > > > So, could Kamailio be used in the path between Asterisk and the
> > > > remote PBX so that the registration on the PBX comes from Kamailio
> > > > (with any incoming calls being passed to Asterisk), but with
> > > > Kamailio also receiving presence information from the remote PBX and
> > > > making this available to some script or application (which I would
> > > > expect to have to write)?
> > > >
> > > > The main point is that I don't want to have two things
registering
> > > > to the remote PBX, one for calls and one for presence, so I'm
> > > > looking for a way to register with something which understands
> > > > presence, and can also pass calls on to Asterisk.
> > > >
> > > > Can anyone suggest whether Kamailio could do this, and if so, point
> > > > me at some resources to help me get started; or alternatively
> > > > suggest ideas on some other tool which might be more appropriate
> > > > than Kamailio?
> > > >
> > > >
> > > > Thanks for any ideas,
> > > >
> > > >
> > > > Antony.
--
Warum können Seeräuber nicht den Umfang eines Kreises berechnen?
Weil sie Piraten...
Please reply to the list;
please *don't* CC me.
4:53 p.m.
Hello Anthony,
as written before, Kamailio is from its design and setup targeted to many different use
cases. For certain use cases you find examples or tutorials in our wiki. But if the
example fits to your case, is mostly a matter of luck and how common it is.
The module documentation is indeed more in "reference" style, useful for
somebody who knows how to combine the building blocks, but for a newcomer admittedly less
useful.
There exists a Kamailio book (refer to asipto.com) which might be useful for your
situation. Here you will get a more broader picture about the different modules and how
they can fit together.
Another approach which some people are using is to start with the default configuration
(which has a lot of comments) and experiment with e.g., a small server and 1-2 phones. For
more advanced topics there exists many talks from past Kamailio World conferences.
Cheers,
Henning
-----Original Message-----
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Antony Stone
Sent: Friday, May 21, 2021 4:31 PM
To: sr-users(a)lists.kamailio.org
Subject: Re: [SR-Users] Can Kamailio help with this?
On Friday 21 May 2021 at 16:14:06, Jurijs Ivolga wrote:
Hi,
If your remote PBX support path header,
That is something I cannot tell, since the PBXs I shall be registering to are operated by
customers and/or their service providers. All I know are the SIP credentials to register
with.
Is path header a common thing for PBXs to support or not support?
then easiest way would be to use Path module of
Kamailio:
https://www.kamailio.org/docs/modules/devel/modules/path.html
Hm, that seems like comprehensive documentation about a specific module, but how does this
fit into a bigger picture?
As I said, I have never implemented Kamailio so far, so I'm looking for a guide which
shows me how to set up something which I hope is quite basic (forwarding client SIP
registrations), starting from when I have installed Kamailio on a machine.
Thanks,
On Fri, May 21, 2021 at 5:09 PM Antony Stone wrote:
> Hi.
>
> I think maybe I asked this question at a busy time, when people were
> dealing with other questions.
>
> Can anyone point me at the appropriate documentation on how to get
> Kamailio set up to pass client registrations through to a remote PBX?
>
> I'm assuming this is a pretty basic use case, but I haven't yet
> found a simple guide.
>
>
> Thanks in advance.
>
> On Tuesday 18 May 2021 at 12:51:21, Antony Stone wrote:
> > On Saturday 15 May 2021 at 22:49:01, Mojtaba wrote:
> > > Absolutely yes, In Kamailio with specific module you could do it.
> > > Some related module for doing this scenario are:
> > > presence, presence_xml, presence_dialoginfo, pua, pua_dialoginfo
> > > You could know more about them by referring to its documentation.
> >
> > Thanks for the confirmation; I'm sure the details you provide will
> > make more sense to me once I'm at a stage where I can use them.
> >
> > In the meantime, I assume that the other part of my requirement -
> > getting Kamailio to pass through client registrations from
> > Asterisk to a remote PBX - is a far more standard setup - where
> > can I find configuration guidelines on how to do this, given that
> > I've never implemented Kamailio so far?
> >
> >
> > Thanks,
> >
> > > On Sat, May 15, 2021 at 5:52 PM Antony Stone wrote:
> > > > Hi.
> > > >
> > > > I've been aware of Kamailio, and on this list, for several
> > > > years, but so far I have not implemented Kamailio for any purpose.
> > > >
> > > > I wonder if it could be a suitable tool for the following scenario.
> > > >
> > > > I currently use Asterisk to register as a client, with
> > > > username and password, to other SIP PBXs in order to receive
> > > > calls. As far as the other PBX is concerned, Asterisk looks
> > > > like a SIP telephone on a particular extension.
> > > >
> > > > However, Asterisk's SIP client capabilities are limited to
> > > > handling phone calls only, and it specifically cannot receive
> > > > presence information about the state of other extensions from
> > > > the remote PBX.
> > > >
> > > > So, could Kamailio be used in the path between Asterisk and
> > > > the remote PBX so that the registration on the PBX comes from
> > > > Kamailio (with any incoming calls being passed to Asterisk),
> > > > but with Kamailio also receiving presence information from the
> > > > remote PBX and making this available to some script or
> > > > application (which I would expect to have to write)?
> > > >
> > > > The main point is that I don't want to have two things
> > > > registering to the remote PBX, one for calls and one for
> > > > presence, so I'm looking for a way to register with something
> > > > which understands presence, and can also pass calls on to Asterisk.
> > > >
> > > > Can anyone suggest whether Kamailio could do this, and if so,
> > > > point me at some resources to help me get started; or
> > > > alternatively suggest ideas on some other tool which might be
> > > > more appropriate than Kamailio?
> > > >
> > > >
> > > > Thanks for any ideas,
> > > >
> > > >
> > > > Antony.
--
Warum können Seeräuber nicht den Umfang eines Kreises berechnen?
Weil sie Piraten...
Please reply to the list;
please *don't* CC me.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
5:04 p.m.
On Friday 21 May 2021 at 16:53:40, Henning Westerholt wrote:
Hello Antony,
as written before, Kamailio is from its design and setup targeted to many
different use cases. For certain use cases you find examples or tutorials
in our wiki. But if the example fits to your case, is mostly a matter of
luck and how common it is.
Well, I had at least expected to find some documentation on how to get it doing
something basic which is easy to test, but I'm still struggling to find such
guides.
Maybe I have the wrong idea about what's a simple setup, and I should learn
how to do what everyone else thinks is a simple place to start?
The module documentation is indeed more in
"reference" style, useful for
somebody who knows how to combine the building blocks, but for a newcomer
admittedly less useful.
I have no problem with that provided there's a guide to "where to specify your
modules".
There exists a Kamailio book (refer to asipto.com)
which might be useful
for your situation. Here you will get a more broader picture about the
different modules and how they can fit together.
Thanks, I'll take a look.
Another approach which some people are using is to
start with the default
configuration (which has a lot of comments) and experiment with e.g., a
small server and 1-2 phones. For more advanced topics there exists many
talks from past Kamailio World conferences.
I'm very happy to experiment - I have enough SIP phones to play with and I can
easily create an Asterisk VM as a server to register to and run a dial plan
on.
Thanks for the pointers.
Antony.
--
This email was created using 100% recycled electrons.
Please reply to the list;
please *don't* CC me.
22 May
22 May
2:30 p.m.
On Friday 21 May 2021 at 17:04:21, Antony Stone wrote:
Well, I had at least expected to find some
documentation on how to get it
doing something basic which is easy to test, but I'm still struggling to
find such guides.
Maybe I have the wrong idea about what's a simple setup, and I should learn
how to do what everyone else thinks is a simple place to start?
During my searches for "getting started with Kamailio" one of the first results
I find is https://kamailio.org/docs/ser-getting-started/SER-GettingStarted.pdf
Is this (still?) relevant to starting out with Kamailio?
I'm starting from Debian 10 and therefore Kamailio 5.2.1; it's not clear to me
whether this is directly compatible with documentation for SER or even how old
that document is.
Thanks,
Antony.
--
90% of networking problems are routing problems.
9 of the remaining 10% are routing problems in the other direction.
The remaining 1% might be something else, but check the routing anyway.
Please reply to the list;
please *don't* CC me.
4:56 p.m.
If I were you, I’d start here:
https://www.asipto.com/sw/kamailio-admin-book/
Get the book, read id and restart. It’ll probably be much easier for you.
Good luck
On Sat, 22 May 2021 at 13:32, Antony Stone <
Antony.Stone(a)kamailio.open.source.it> wrote:
On Friday 21 May 2021 at 17:04:21, Antony Stone
wrote:
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
Well, I had at least expected to find some
documentation on how to get it
doing something basic which is easy to test, but I'm still struggling to
find such guides.
Maybe I have the wrong idea about what's a simple setup, and I should
learn
how to do what everyone else thinks is a simple
place to start?
During my searches for "getting started with Kamailio" one of the first
results
I find is
https://kamailio.org/docs/ser-getting-started/SER-GettingStarted.pdf
Is this (still?) relevant to starting out with Kamailio?
I'm starting from Debian 10 and therefore Kamailio 5.2.1; it's not clear
to me
whether this is directly compatible with documentation for SER or even how
old
that document is.
Thanks,
Antony.
--
90% of networking problems are routing problems.
9 of the remaining 10% are routing problems in the other direction.
The remaining 1% might be something else, but check the routing anyway.
Please reply to the
list;
please *don't* CC
me.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
21 May
21 May
4:54 p.m.
On 5/21/21 10:30 AM, Antony Stone wrote:
Is path header a common thing for PBXs to support or
not support?
It's common, since it's a standard. But it took some time to get
traction. Asterisk did not support it before version 12, for example.
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
4:57 p.m.
On Friday 21 May 2021 at 16:54:49, Alex Balashov wrote:
On 5/21/21 10:30 AM, Antony Stone wrote:
Okay, thanks - at least it's a starting point which is:
a) a standard, so we can refer people to it if we get problems, and
b) supported by our own PBXs (Asterisk 13 & 16) so we can evaluate (once I get
to a point where I have *something* working in Kamailio - I'm still searching
for the beginners' guide, I think).
Antony.
--
Don't procrastinate - put it off until tomorrow.
Please reply to the list;
please *don't* CC me.
Is path header a common thing for PBXs to support
or not support?
It's common, since it's a standard. But it took some time to get
traction. Asterisk did not support it before version 12, for example.
1079
days inactive
1086
days old
11 comments
6 participants
participants (6)
-
Alex Balashov -
Antony Stone -
David Villasmil -
Henning Westerholt -
Jurijs Ivolga -
Mojtaba