Hello Pereira,

On 3/14/07, Joao Pereira joao.pereira@fccn.pt wrote:

Hellos I whant to run RTPproxy separatly from my SIP router, so I tried to run it like this:

[root@vox rtpproxy-0.3]# rtpproxy -s udp:xxx.xxx.xxx.xxx:22222

Above one should be the ,where the rtp procy runnning System , if that System is inside the NAT , u need to forward the Port

And the rtpproxy also shold run their itself

rtpproxy: explicit binding address has to be specified in UDP command mode

[root@vox rtpproxy-0.3]# rtpproxy -l xxx.xxx.xxx.xxx: -s udp:xxx.xxx.xxx.xxx::22222

xxx.xxx.xxx.xxx: = my IP

But when I run openSER, this happens

9(15400) WARNING: rtpp_test: support for RTP proxy has been disabled temporarily 11(15407) ERROR: send_rtpp_command: can't connect to RTP proxy

I already tried with modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock")

and with

Use below one

modparam("nathelper", "rtpproxy_sock", "udp:xxx.xxx.xxx.xxx:22222")

But it always says: send_rtpp_command: can't connect to RTP proxy

THis means openSER is not communicated with RTP proxy with that IP,

Whats the problem?

Im using this configuration in sip.conf: http://siprouter.onsip.org/doc/gettingstarted/ch08s02.html

Regards Joao Pereira

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users