21 Jun
2007
21 Jun
'07
4:36 a.m.
Dear All:
I've tried many methods to add Max-Forwarsd header into ACK message (message
8), all methods I tried were fail.
According to RFC 3261 8.1.1.6, Max-Forwards must exist in this ACK message.
Can anyone tell me how to add a header into ACK message? Thank you very
much.
UA11 : NUT(Proxy 1) : UA12
| : | : |
|-------:------->| : | 1. INVITE
|<------:--------| : | 2. 407
|-------:------->| : | 3. ACK
| : | : |
|-------:------->| : | 4. INVITE
| : |-------:------->| 5. INVITE
|<------:--------| : | 6. 100
| : | : |
| : |<------:--------| 7. 486 (Busy Here)
| : | : |
| : |-------:------->| 8. ACK
| : | : |
|<------:--------| : | 9. 486
| : | : |
|-------:------->| : |10. ACK
| : | : |
Best Regards,
Fangyu Ling
21 Jun
21 Jun
4:59 a.m.
凌芳瑜 wrote:
Dear All:
I've tried many methods to add Max-Forwarsd header into ACK message
(message 8), all methods I tried were fail.
According to RFC 3261 8.1.1.6, Max-Forwards must exist in this ACK
message. Can anyone tell me how to add a header into ACK message? Thank
you very much.
UA11 : NUT(Proxy 1) : UA12
| : | : |
|-------:------->| : | 1. INVITE
|<------:--------| : | 2. 407
|-------:------->| : | 3. ACK
| : | : |
|-------:------->| : | 4. INVITE
| : |-------:------->| 5. INVITE
|<------:--------| : | 6. 100
| : | : |
| : |<------:--------| 7. 486 (Busy Here)
| : | : |
| : |-------:------->| 8. ACK
| : | : |
|<------:--------| : | 9. 486
| : | : |
|-------:------->| : |10. ACK
| : | : |
Best Regards,
Fangyu Ling
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
if(is_method "ACK") && !search(Max-Forwards:)){
insert_hf("Max-Forwards: X ", "" )
};
Something like this (I guess you'll need a number in the max forwards
header, etc)in the correct place (look at the documentation for
insert_hf()) should do the job..
6:19 a.m.
Hi,
maybe the simplest way will be to use the maxfwd module. See:
http://www.openser.org/docs/modules/1.2.x/maxfwd.html#AEN70
regards,
bogdan
nick wrote:
凌芳瑜 wrote:
Dear All:
I've tried many methods to add Max-Forwarsd header into ACK message
(message 8), all methods I tried were fail.
According to RFC 3261 8.1.1.6, Max-Forwards must exist in this ACK
message. Can anyone tell me how to add a header into ACK message? Thank
you very much.
UA11 : NUT(Proxy 1) : UA12
| : | : |
|-------:------->| : | 1. INVITE
|<------:--------| : | 2. 407
|-------:------->| : | 3. ACK
| : | : |
|-------:------->| : | 4. INVITE
| : |-------:------->| 5. INVITE
|<------:--------| : | 6. 100
| : | : |
| : |<------:--------| 7. 486 (Busy Here)
| : | : |
| : |-------:------->| 8. ACK
| : | : |
|<------:--------| : | 9. 486
| : | : |
|-------:------->| : |10. ACK
| : | : |
Best Regards,
Fangyu Ling
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
if(is_method "ACK") && !search(Max-Forwards:)){
insert_hf("Max-Forwards: X ", "" )
};
Something like this (I guess you'll need a number in the max forwards
header, etc)in the correct place (look at the documentation for
insert_hf()) should do the job..
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
9:11 a.m.
The suspect message is generated by openser internally (8).
Thus the max-fwd module wont help - I guess.
regards
klaus
Bogdan-Andrei Iancu wrote:
Hi,
maybe the simplest way will be to use the maxfwd module. See:
http://www.openser.org/docs/modules/1.2.x/maxfwd.html#AEN70
regards,
bogdan
nick wrote:
凌芳瑜 wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users Dear All:
I've tried many methods to add Max-Forwarsd header into ACK message
(message 8), all methods I tried were fail.
According to RFC 3261 8.1.1.6, Max-Forwards must exist in this ACK
message. Can anyone tell me how to add a header into ACK message?
Thank you very much.
UA11 : NUT(Proxy 1) : UA12
| : | : |
|-------:------->| : | 1. INVITE
|<------:--------| : | 2. 407
|-------:------->| : | 3. ACK
| : | : |
|-------:------->| : | 4. INVITE
| : |-------:------->| 5. INVITE
|<------:--------| : | 6. 100
| : | : |
| : |<------:--------| 7. 486 (Busy Here)
| : | : |
| : |-------:------->| 8. ACK
| : | : |
|<------:--------| : | 9. 486
| : | : |
|-------:------->| : |10. ACK
| : | : |
Best Regards,
Fangyu Ling
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
if(is_method "ACK") && !search(Max-Forwards:)){
insert_hf("Max-Forwards: X ", "" )
};
Something like this (I guess you'll need a number in the max forwards
header, etc)in the correct place (look at the documentation for
insert_hf()) should do the job..
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
9:37 a.m.
Hi Klaus,
you are right - I wasn't paying enough attention - I thought it was
about a relayed ACK.
I guess the problem is in TM when generating ACK - it should put a MF
header.
regards,
Bogdan
Klaus Darilion wrote:
The suspect message is generated by openser internally
(8).
Thus the max-fwd module wont help - I guess.
regards
klaus
Bogdan-Andrei Iancu wrote:
Hi,
maybe the simplest way will be to use the maxfwd module. See:
http://www.openser.org/docs/modules/1.2.x/maxfwd.html#AEN70
regards,
bogdan
nick wrote:
凌芳瑜 wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users Dear All:
I've tried many methods to add Max-Forwarsd header into ACK message
(message 8), all methods I tried were fail.
According to RFC 3261 8.1.1.6, Max-Forwards must exist in this ACK
message. Can anyone tell me how to add a header into ACK message?
Thank you very much.
UA11 : NUT(Proxy 1) : UA12
| : | : |
|-------:------->| : | 1. INVITE
|<------:--------| : | 2. 407
|-------:------->| : | 3. ACK
| : | : |
|-------:------->| : | 4. INVITE
| : |-------:------->| 5. INVITE
|<------:--------| : | 6. 100
| : | : |
| : |<------:--------| 7. 486 (Busy Here)
| : | : |
| : |-------:------->| 8. ACK
| : | : |
|<------:--------| : | 9. 486
| : | : |
|-------:------->| : |10. ACK
| : | : |
Best Regards,
Fangyu Ling
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
if(is_method "ACK") && !search(Max-Forwards:)){
insert_hf("Max-Forwards: X ", "" )
};
Something like this (I guess you'll need a number in the max forwards
header, etc)in the correct place (look at the documentation for
insert_hf()) should do the job..
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
22 Jun
22 Jun
7:04 a.m.
Hi Nick,
I made a fix on SVN trunk - TM will include a Max-Forwards header in the
local generated ACK and CANCEL. Let me know if works ok for you.
Regards,
bogdan
nick wrote:
凌芳瑜 wrote:
Dear All:
I've tried many methods to add Max-Forwarsd header into ACK message
(message 8), all methods I tried were fail.
According to RFC 3261 8.1.1.6, Max-Forwards must exist in this ACK
message. Can anyone tell me how to add a header into ACK message? Thank
you very much.
UA11 : NUT(Proxy 1) : UA12
| : | : |
|-------:------->| : | 1. INVITE
|<------:--------| : | 2. 407
|-------:------->| : | 3. ACK
| : | : |
|-------:------->| : | 4. INVITE
| : |-------:------->| 5. INVITE
|<------:--------| : | 6. 100
| : | : |
| : |<------:--------| 7. 486 (Busy Here)
| : | : |
| : |-------:------->| 8. ACK
| : | : |
|<------:--------| : | 9. 486
| : | : |
|-------:------->| : |10. ACK
| : | : |
Best Regards,
Fangyu Ling
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
if(is_method "ACK") && !search(Max-Forwards:)){
insert_hf("Max-Forwards: X ", "" )
};
Something like this (I guess you'll need a number in the max forwards
header, etc)in the correct place (look at the documentation for
insert_hf()) should do the job..
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
9:02 a.m.
Bogdan-Andrei Iancu wrote:
Hi Nick,
I made a fix on SVN trunk - TM will include a Max-Forwards header in the
local generated ACK and CANCEL. Let me know if works ok for you.
Regards,
bogdan
Thanks, but it wasn't my problem but that of Fangyu Ling.
I'm sure he'll be happy though!!
12:03 p.m.
my mistake - wrong level in the thread :).
regards,
bogdan
nick wrote:
Bogdan-Andrei Iancu wrote:
Hi Nick,
I made a fix on SVN trunk - TM will include a Max-Forwards header in
the local generated ACK and CANCEL. Let me know if works ok for you.
Regards,
bogdan
Thanks, but it wasn't my problem but that of Fangyu Ling.
I'm sure he'll be happy though!!
11 p.m.
Hi Bogdan-Andrei:
Thank you very much. It's very helpful for me.
Hi Nick:
I'm "she", not "he" : )
Best Regards,
Fangyu Ling
my mistake - wrong level in the thread :).
regards,
bogdan
nick wrote:
Bogdan-Andrei Iancu wrote:
Hi Nick,
I made a fix on SVN trunk - TM will include a Max-Forwards header in
the local generated ACK and CANCEL. Let me know if works ok for you.
Regards,
bogdan
Thanks, but it wasn't my problem but that of Fangyu Ling.
I'm sure he'll be happy though!!
25 Jun
25 Jun
5:14 a.m.
凌芳瑜 wrote:
Hi Bogdan-Andrei:
Thank you very much. It's very helpful for me.
Hi Nick:
I'm "she", not "he" : )
Best Regards, Fangyu Ling
My apologies!
my mistake - wrong level in the thread :).
regards,
bogdan
nick wrote:
Bogdan-Andrei Iancu wrote:
Hi Nick,
I made a fix on SVN trunk - TM will include a Max-Forwards header in
the local generated ACK and CANCEL. Let me know if works ok for you.
Regards,
bogdan
Thanks, but it wasn't my problem but that of Fangyu Ling.
I'm sure he'll be happy though!!
6335
days inactive
6339
days old
9 comments
4 participants
participants (4)
-
Bogdan-Andrei Iancu -
Klaus Darilion -
nick -
凌芳瑜