Will look into this for you later today. Any chance of a gdb backtrace in the meantime? On 31 May 2016 8:07 AM, "Christoph Valentin" christoph.valentin@gmx.at wrote:
I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via Cx to an HSS and connected via Mw to a Zoiper Client.
I installed following RPMs: kamailio-xml-4.4.0-12.1.x86_64 kamailio-4.4.0-12.1.x86_64 kamailio-debuginfo-4.4.0-12.1.x86_64 kamailio-mysql-4.4.0-12.1.x86_64 kamailio-ims-4.4.0-12.1.x86_64 kamailio-tls-4.4.0-12.1.x86_64 kamailio-presence-4.4.0-12.1.x86_64
and copied config from kamailio-4.4.0_src.tar.gz examples/scscf
Modified config (see attached etc_kamailio.tar.gz)
Prepared Zoiper client, prepared HSS
Then started S-CSCF (kamctl start), registered user xaver@vict-ims.net, registered user yvonne@vict-ims.net, deregistered user yvonne@vict-ims.net
After some time S-CSCF gets signal 11 and stops, I guess its some timer expiring thats the reason (tshark and kamailio level 3 logs in attachment) ---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
Thanks for help
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi Christoph,
Can you pls send your cfg file? Also, are you not using DB mode?
Cheers Jason
On Thu, Jun 2, 2016 at 3:41 PM, Christoph Valentin < christoph.valentin@gmx.at> wrote:
Hi Jason,
Sorry for delay, but I did like to try Carsten's proposal, before I send you the GDB traceback.
Now I installed the same packages but from kamailio-4.4.1-1.1, did not change the config and repeated the test - same result.
tshark, level 2 logs and GDB traceback in attachment of this mail.
I found two cores from the same time, only one fits to kamailio.pid, but I did two backtraces.
Two suspects:
- deactivated the dispatchers (want to activate in later step)
- deactivated presence DB (want to activate in a later step)
Thanks for help, Christoph
*Gesendet:* Dienstag, 31. Mai 2016 um 08:25 Uhr *Von:* "Jason Penton" jason.penton@smilecoms.com *An:* "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List" sr-users@lists.sip-router.org *Betreff:* Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of client
Will look into this for you later today. Any chance of a gdb backtrace in the meantime? On 31 May 2016 8:07 AM, "Christoph Valentin" christoph.valentin@gmx.at wrote:
I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via Cx to an HSS and connected via Mw to a Zoiper Client.
I installed following RPMs: kamailio-xml-4.4.0-12.1.x86_64 kamailio-4.4.0-12.1.x86_64 kamailio-debuginfo-4.4.0-12.1.x86_64 kamailio-mysql-4.4.0-12.1.x86_64 kamailio-ims-4.4.0-12.1.x86_64 kamailio-tls-4.4.0-12.1.x86_64 kamailio-presence-4.4.0-12.1.x86_64
and copied config from kamailio-4.4.0_src.tar.gz examples/scscf
Modified config (see attached etc_kamailio.tar.gz)
Prepared Zoiper client, prepared HSS
Then started S-CSCF (kamctl start), registered user xaver@vict-ims.net, registered user yvonne@vict-ims.net, deregistered user yvonne@vict-ims.net
After some time S-CSCF gets signal 11 and stops, I guess its some timer expiring thats the reason (tshark and kamailio level 3 logs in attachment) ---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
Thanks for help
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
This email is subject to the disclaimer of Smile Communications at http://www.smilecoms.com/home/email-disclaimer/
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi Christoph,
"Now I installed the same packages but from kamailio-4.4.1-1.1, did not change the config and repeated the test - same result."
Where did you obtain those packages? These are definitely NOT the trunk version.... (according to the Makefiles, Kamailio is at Version 5.0.0....)
Thanks, Carsten
2016-06-02 16:41 GMT+03:00 Christoph Valentin christoph.valentin@gmx.at:
Hi Jason,
Sorry for delay, but I did like to try Carsten's proposal, before I send you the GDB traceback.
Now I installed the same packages but from kamailio-4.4.1-1.1, did not change the config and repeated the test - same result.
tshark, level 2 logs and GDB traceback in attachment of this mail.
I found two cores from the same time, only one fits to kamailio.pid, but I did two backtraces.
Two suspects:
- deactivated the dispatchers (want to activate in later step)
- deactivated presence DB (want to activate in a later step)
Thanks for help, Christoph
Gesendet: Dienstag, 31. Mai 2016 um 08:25 Uhr Von: "Jason Penton" jason.penton@smilecoms.com An: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List" sr-users@lists.sip-router.org Betreff: Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of client
Will look into this for you later today. Any chance of a gdb backtrace in the meantime?
On 31 May 2016 8:07 AM, "Christoph Valentin" christoph.valentin@gmx.at wrote:
I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via Cx to an HSS and connected via Mw to a Zoiper Client.
I installed following RPMs: kamailio-xml-4.4.0-12.1.x86_64 kamailio-4.4.0-12.1.x86_64 kamailio-debuginfo-4.4.0-12.1.x86_64 kamailio-mysql-4.4.0-12.1.x86_64 kamailio-ims-4.4.0-12.1.x86_64 kamailio-tls-4.4.0-12.1.x86_64 kamailio-presence-4.4.0-12.1.x86_64
and copied config from kamailio-4.4.0_src.tar.gz examples/scscf
Modified config (see attached etc_kamailio.tar.gz)
Prepared Zoiper client, prepared HSS
Then started S-CSCF (kamctl start), registered user xaver@vict-ims.net, registered user yvonne@vict-ims.net, deregistered user yvonne@vict-ims.net
After some time S-CSCF gets signal 11 and stops, I guess its some timer expiring thats the reason (tshark and kamailio level 3 logs in attachment) ---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
Thanks for help
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
This email is subject to the disclaimer of Smile Communications at http://www.smilecoms.com/home/email-disclaimer/
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Yes, agreed,
should not crash ;) - I see the bug and will commit just now.
cheers Jason
On Thu, Jun 2, 2016 at 4:07 PM, Carsten Bock carsten@ng-voice.com wrote:
Hi Christoph,
"Now I installed the same packages but from kamailio-4.4.1-1.1, did not change the config and repeated the test - same result."
Where did you obtain those packages? These are definitely NOT the trunk version.... (according to the Makefiles, Kamailio is at Version 5.0.0....)
Thanks, Carsten
2016-06-02 16:41 GMT+03:00 Christoph Valentin christoph.valentin@gmx.at:
Hi Jason,
Sorry for delay, but I did like to try Carsten's proposal, before I send
you
the GDB traceback.
Now I installed the same packages but from kamailio-4.4.1-1.1, did not change the config and repeated the test - same result.
tshark, level 2 logs and GDB traceback in attachment of this mail.
I found two cores from the same time, only one fits to kamailio.pid, but
I
did two backtraces.
Two suspects:
- deactivated the dispatchers (want to activate in later step)
- deactivated presence DB (want to activate in a later step)
Thanks for help, Christoph
Gesendet: Dienstag, 31. Mai 2016 um 08:25 Uhr Von: "Jason Penton" jason.penton@smilecoms.com An: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List" sr-users@lists.sip-router.org Betreff: Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of client
Will look into this for you later today. Any chance of a gdb backtrace in the meantime?
On 31 May 2016 8:07 AM, "Christoph Valentin" christoph.valentin@gmx.at wrote:
I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via Cx to an HSS and connected via Mw to a Zoiper Client.
I installed following RPMs: kamailio-xml-4.4.0-12.1.x86_64 kamailio-4.4.0-12.1.x86_64 kamailio-debuginfo-4.4.0-12.1.x86_64 kamailio-mysql-4.4.0-12.1.x86_64 kamailio-ims-4.4.0-12.1.x86_64 kamailio-tls-4.4.0-12.1.x86_64 kamailio-presence-4.4.0-12.1.x86_64
and copied config from kamailio-4.4.0_src.tar.gz examples/scscf
Modified config (see attached etc_kamailio.tar.gz)
Prepared Zoiper client, prepared HSS
Then started S-CSCF (kamctl start), registered user xaver@vict-ims.net, registered user yvonne@vict-ims.net, deregistered user
yvonne@vict-ims.net
After some time S-CSCF gets signal 11 and stops, I guess its some timer expiring thats the reason (tshark and kamailio level 3 logs in
attachment)
---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
Thanks for help
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
This email is subject to the disclaimer of Smile Communications at http://www.smilecoms.com/home/email-disclaimer/
_______________________________________________ SIP Express Router (SER)
and
Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Carsten Bock CEO (Geschäftsführer)
ng-voice GmbH Millerntorplatz 1 20359 Hamburg / Germany
http://www.ng-voice.com mailto:carsten@ng-voice.com
Office +49 40 5247593-40 Fax +49 40 5247593-99
Sitz der Gesellschaft: Hamburg Registergericht: Amtsgericht Hamburg, HRB 120189 Geschäftsführer: Carsten Bock Ust-ID: DE279344284
Hier finden Sie unsere handelsrechtlichen Pflichtangaben: http://www.ng-voice.com/imprint/
@Christoph,
please use master - I have just committed a patch. Daniel, could you please backport? is there a howto on how to backport a commit to previous versions?
Cheers Jason
On Thu, Jun 2, 2016 at 4:11 PM, Jason Penton jason.penton@smilecoms.com wrote:
Yes, agreed,
should not crash ;) - I see the bug and will commit just now.
cheers Jason
On Thu, Jun 2, 2016 at 4:07 PM, Carsten Bock carsten@ng-voice.com wrote:
Hi Christoph,
"Now I installed the same packages but from kamailio-4.4.1-1.1, did not change the config and repeated the test - same result."
Where did you obtain those packages? These are definitely NOT the trunk version.... (according to the Makefiles, Kamailio is at Version 5.0.0....)
Thanks, Carsten
2016-06-02 16:41 GMT+03:00 Christoph Valentin <christoph.valentin@gmx.at
: Hi Jason,
Sorry for delay, but I did like to try Carsten's proposal, before I
send you
the GDB traceback.
Now I installed the same packages but from kamailio-4.4.1-1.1, did not change the config and repeated the test - same result.
tshark, level 2 logs and GDB traceback in attachment of this mail.
I found two cores from the same time, only one fits to kamailio.pid,
but I
did two backtraces.
Two suspects:
- deactivated the dispatchers (want to activate in later step)
- deactivated presence DB (want to activate in a later step)
Thanks for help, Christoph
Gesendet: Dienstag, 31. Mai 2016 um 08:25 Uhr Von: "Jason Penton" jason.penton@smilecoms.com An: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
Users
Mailing List" sr-users@lists.sip-router.org Betreff: Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration
of
client
Will look into this for you later today. Any chance of a gdb backtrace
in
the meantime?
On 31 May 2016 8:07 AM, "Christoph Valentin" <christoph.valentin@gmx.at
wrote:
I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected
via
Cx to an HSS and connected via Mw to a Zoiper Client.
I installed following RPMs: kamailio-xml-4.4.0-12.1.x86_64 kamailio-4.4.0-12.1.x86_64 kamailio-debuginfo-4.4.0-12.1.x86_64 kamailio-mysql-4.4.0-12.1.x86_64 kamailio-ims-4.4.0-12.1.x86_64 kamailio-tls-4.4.0-12.1.x86_64 kamailio-presence-4.4.0-12.1.x86_64
and copied config from kamailio-4.4.0_src.tar.gz examples/scscf
Modified config (see attached etc_kamailio.tar.gz)
Prepared Zoiper client, prepared HSS
Then started S-CSCF (kamctl start), registered user xaver@vict-ims.net
,
registered user yvonne@vict-ims.net, deregistered user
yvonne@vict-ims.net
After some time S-CSCF gets signal 11 and stops, I guess its some timer expiring thats the reason (tshark and kamailio level 3 logs in
attachment)
---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
Thanks for help
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
This email is subject to the disclaimer of Smile Communications at http://www.smilecoms.com/home/email-disclaimer/
_______________________________________________ SIP Express Router
(SER) and
Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Carsten Bock CEO (Geschäftsführer)
ng-voice GmbH Millerntorplatz 1 20359 Hamburg / Germany
http://www.ng-voice.com mailto:carsten@ng-voice.com
Office +49 40 5247593-40 Fax +49 40 5247593-99
Sitz der Gesellschaft: Hamburg Registergericht: Amtsgericht Hamburg, HRB 120189 Geschäftsführer: Carsten Bock Ust-ID: DE279344284
Hier finden Sie unsere handelsrechtlichen Pflichtangaben: http://www.ng-voice.com/imprint/
--
*Jason Penton* *Senior Manager: Applications and Services* *Smile Communications Pty (Ltd)*
*Voice:Mobile:* +234 (0) 702 000 000 7
+27 (0) 83 283 7000 *Skype:* jason.barry.penton jason.penton@smilecoms.com name.surname@smilecoms.com www.smilecoms.com
Jason: some guidelines about backporting are at:
- http://www.kamailio.org/wiki/devel/backporting-to-3.2.x#backporting_to_branc...
You have to change branch 3.2 to 4.4.
In short: check out branch 4.4 locally, use git cherry-pick -x COMMITID, compile the module to see all is ok, then do git push origin 4.4:4.4. The COMMITID is for the patch in master branch in this case.
Cheers, Daniel
On 02/06/16 16:32, Jason Penton wrote:
@Christoph,
please use master - I have just committed a patch. Daniel, could you please backport? is there a howto on how to backport a commit to previous versions?
Cheers Jason
On Thu, Jun 2, 2016 at 4:11 PM, Jason Penton <jason.penton@smilecoms.com mailto:jason.penton@smilecoms.com> wrote:
Yes, agreed, should not crash ;) - I see the bug and will commit just now. cheers Jason On Thu, Jun 2, 2016 at 4:07 PM, Carsten Bock <carsten@ng-voice.com <mailto:carsten@ng-voice.com>> wrote: Hi Christoph, "Now I installed the same packages but from kamailio-4.4.1-1.1, did not change the config and repeated the test - same result." Where did you obtain those packages? These are definitely NOT the trunk version.... (according to the Makefiles, Kamailio is at Version 5.0.0....) Thanks, Carsten 2016-06-02 16:41 GMT+03:00 Christoph Valentin <christoph.valentin@gmx.at <mailto:christoph.valentin@gmx.at>>: > Hi Jason, > > Sorry for delay, but I did like to try Carsten's proposal, before I send you > the GDB traceback. > > Now I installed the same packages but from kamailio-4.4.1-1.1, did not > change the config and repeated the test - same result. > > tshark, level 2 logs and GDB traceback in attachment of this mail. > > I found two cores from the same time, only one fits to kamailio.pid, but I > did two backtraces. > > Two suspects: > 1) deactivated the dispatchers (want to activate in later step) > 2) deactivated presence DB (want to activate in a later step) > > Thanks for help, > Christoph > > Gesendet: Dienstag, 31. Mai 2016 um 08:25 Uhr > Von: "Jason Penton" <jason.penton@smilecoms.com <mailto:jason.penton@smilecoms.com>> > An: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users > Mailing List" <sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>> > Betreff: Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of > client > > Will look into this for you later today. Any chance of a gdb backtrace in > the meantime? > > On 31 May 2016 8:07 AM, "Christoph Valentin" <christoph.valentin@gmx.at <mailto:christoph.valentin@gmx.at>> > wrote: >> >> I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via >> Cx to an HSS and connected via Mw to a Zoiper Client. >> >> I installed following RPMs: >> kamailio-xml-4.4.0-12.1.x86_64 >> kamailio-4.4.0-12.1.x86_64 >> kamailio-debuginfo-4.4.0-12.1.x86_64 >> kamailio-mysql-4.4.0-12.1.x86_64 >> kamailio-ims-4.4.0-12.1.x86_64 >> kamailio-tls-4.4.0-12.1.x86_64 >> kamailio-presence-4.4.0-12.1.x86_64 >> >> and copied config from kamailio-4.4.0_src.tar.gz >> examples/scscf >> >> Modified config (see attached etc_kamailio.tar.gz) >> >> Prepared Zoiper client, prepared HSS >> >> Then started S-CSCF (kamctl start), registered user xaver@vict-ims.net <mailto:xaver@vict-ims.net>, >> registered user yvonne@vict-ims.net <mailto:yvonne@vict-ims.net>, deregistered user yvonne@vict-ims.net <mailto:yvonne@vict-ims.net> >> >> After some time S-CSCF gets signal 11 and stops, I guess its some timer >> expiring thats the reason (tshark and kamailio level 3 logs in attachment) >> ---> who's wrong? Is it a bug in kamailio? Is it a wrong config? >> >> Thanks for help >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> > > > > This email is subject to the disclaimer of Smile Communications at > http://www.smilecoms.com/home/email-disclaimer/ > > _______________________________________________ SIP Express Router (SER) and > Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Carsten Bock CEO (Geschäftsführer) ng-voice GmbH Millerntorplatz 1 20359 Hamburg / Germany http://www.ng-voice.com mailto:carsten@ng-voice.com <mailto:carsten@ng-voice.com> Office +49 40 5247593-40 <tel:%2B49%2040%205247593-40> Fax +49 40 5247593-99 <tel:%2B49%2040%205247593-99> Sitz der Gesellschaft: Hamburg Registergericht: Amtsgericht Hamburg, HRB 120189 Geschäftsführer: Carsten Bock Ust-ID: DE279344284 Hier finden Sie unsere handelsrechtlichen Pflichtangaben: http://www.ng-voice.com/imprint/ -- *Jason Penton* *Senior Manager: Applications and Services* *Smile Communications Pty (Ltd)* *Voice: Mobile:* +234 (0) 702 000 000 7 +27 (0) 83 283 7000 <tel:%2B27%20%280%29%2083%20283%207000> *Skype:* jason.barry.penton jason.penton@smilecoms.com <mailto:name.surname@smilecoms.com> www.smilecoms.com <http://www.smilecoms.com/>--
*Jason Penton* *Senior Manager: Applications and Services* *Smile Communications Pty (Ltd)* *Voice:
Mobile:* +234 (0) 702 000 000 7
+27 (0) 83 283 7000 *Skype:* jason.barry.penton
jason.penton@smilecoms.com mailto:name.surname@smilecoms.com www.smilecoms.com http://www.smilecoms.com/
This email is subject to the disclaimer of Smile Communications at http://www.smilecoms.com/home/email-disclaimer/ http://www.smilecoms.com/home/email-disclaimer/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi Christoph,
can you try with latest trunk? I assume, that's fixed already.... the Trunk Version doesn't crash, if Zoiper unregisters.
Thanks, Carsten
2016-05-30 16:20 GMT+03:00 Christoph Valentin christoph.valentin@gmx.at:
I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via Cx to an HSS and connected via Mw to a Zoiper Client.
I installed following RPMs: kamailio-xml-4.4.0-12.1.x86_64 kamailio-4.4.0-12.1.x86_64 kamailio-debuginfo-4.4.0-12.1.x86_64 kamailio-mysql-4.4.0-12.1.x86_64 kamailio-ims-4.4.0-12.1.x86_64 kamailio-tls-4.4.0-12.1.x86_64 kamailio-presence-4.4.0-12.1.x86_64
and copied config from kamailio-4.4.0_src.tar.gz examples/scscf
Modified config (see attached etc_kamailio.tar.gz)
Prepared Zoiper client, prepared HSS
Then started S-CSCF (kamctl start), registered user xaver@vict-ims.net, registered user yvonne@vict-ims.net, deregistered user yvonne@vict-ims.net
After some time S-CSCF gets signal 11 and stops, I guess its some timer expiring thats the reason (tshark and kamailio level 3 logs in attachment) ---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
Thanks for help
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Carsten Bock -
Christoph Valentin -
Daniel-Constantin Mierla -
Jason Penton