Hi all,
I would like to know if anyone has some experience (maybe some dev?) with rtpproxy and video. I have done some testing but with no result, audio works like a charm but it looks like video is unsupported. I hope someone can tell me I'm wrong and point me to the right way to set up video.
I set up ser.cfg routing for video the same way it is set up for audio, is this correct? (it should as SIP is media independent...) I read in some past message that video support was added to cvs rtpproxy so i downloaded it and made some test with no luck, so I was wondering wether the problem is in my cfg or in rtpproxy.
My ser.cfg is from onsip.org with some customization, I was testing it with eyebeam which sends another INVITE when starting video, this INVITE enters loose_route section and then force_rtp_proxy("l") command, rtpproxy responds but I can't get video.
Any comments? thanks a lot
ciao
rtpproxy CVS HEAD supports video according to Maxim's check-in notes (i.e. not 0.9.0). I have not heard anybody report on successful use of rtpproxy for video. There is also a patch (found in serusers archives) that people have reported to work. Mediaproxy supports video. g-)
Giovanni Balasso wrote:
Hi all,
I would like to know if anyone has some experience (maybe some dev?) with rtpproxy and video. I have done some testing but with no result, audio works like a charm but it looks like video is unsupported. I hope someone can tell me I'm wrong and point me to the right way to set up video.
I set up ser.cfg routing for video the same way it is set up for audio, is this correct? (it should as SIP is media independent...) I read in some past message that video support was added to cvs rtpproxy so i downloaded it and made some test with no luck, so I was wondering wether the problem is in my cfg or in rtpproxy.
My ser.cfg is from onsip.org with some customization, I was testing it with eyebeam which sends another INVITE when starting video, this INVITE enters loose_route section and then force_rtp_proxy("l") command, rtpproxy responds but I can't get video.
Any comments? thanks a lot
ciao
* Greger V. Teigre greger@teigre.com [050530 13:32]:
rtpproxy CVS HEAD supports video according to Maxim's check-in notes (i.e. not 0.9.0). I have not heard anybody report on successful use of rtpproxy for video. There is also a patch (found in serusers archives) that people have reported to work. Mediaproxy supports video. g-)
I did a quick tst of this a few weeks ago, and it worked like a charm with video.
- Atle
Giovanni Balasso wrote:
Hi all,
I would like to know if anyone has some experience (maybe some dev?) with rtpproxy and video. I have done some testing but with no result, audio works like a charm but it looks like video is unsupported. I hope someone can tell me I'm wrong and point me to the right way to set up video.
I set up ser.cfg routing for video the same way it is set up for audio, is this correct? (it should as SIP is media independent...) I read in some past message that video support was added to cvs rtpproxy so i downloaded it and made some test with no luck, so I was wondering wether the problem is in my cfg or in rtpproxy.
My ser.cfg is from onsip.org with some customization, I was testing it with eyebeam which sends another INVITE when starting video, this INVITE enters loose_route section and then force_rtp_proxy("l") command, rtpproxy responds but I can't get video.
Any comments? thanks a lot
ciao
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Alle 14:42, lunedì 30 maggio 2005, Atle Samuelsen ha scritto:
I did a quick tst of this a few weeks ago, and it worked like a charm with video.
- Atle
would you please provide some more info about your config? clients used, routing issues, changes to original ser.cfg...?
thanks a lot
ciao
Hi
* Giovanni Balasso giaso@yahoo.it [050530 15:23]:
Alle 14:42, luned? 30 maggio 2005, Atle Samuelsen ha scritto:
I did a quick tst of this a few weeks ago, and it worked like a charm with video.
- Atle
would you please provide some more info about your config? clients used, routing issues, changes to original ser.cfg...?
thanks a lot
ciao
I just used a standard nathelper config. (I used CVS head nathelper) I tried with Eyebeam.
- Atle
-- Giovanni Balasso giaso@yahoo.it
-
Atle Samuelsen -
Giovanni Balasso -
Greger V. Teigre