Hey all,
I need some more clarification on dispatcher alg 8:
“8” - use first destination (good for failover).
What is meant by "first destination"? How is that defined if I have more than one carrier.
More specifically in our case for some PSTN locations we have this setup:
primary carrier - 1 sip trunk backup carrier - 4 sip trunks
or
primary carrier - 4 sip trunks backup carrier - 1 sip trunk
the one that have 4 sip trunks is it going to round-robin through it?
this is setup on our old 4.1.5 release.
thanks
The algorithm uses priority based (high value to low value). First destination is that destination with the highest value priority.
You can also use groups for custom handling: https://www.kamailio.org/docs/modules/stable/modules/dispatcher.html#dispatc...
Fred Posner https://qxork.com
On 1/31/19 8:27 AM, Andrew Chen wrote:
Hey all,
I need some more clarification on dispatcher alg 8:
“8” - use first destination (good for failover).
What is meant by "first destination"? How is that defined if I have more than one carrier.
More specifically in our case for some PSTN locations we have this setup:
primary carrier - 1 sip trunk backup carrier - 4 sip trunks
or
primary carrier - 4 sip trunks backup carrier - 1 sip trunk
the one that have 4 sip trunks is it going to round-robin through it?
this is setup on our old 4.1.5 release.
thanks
-- Andy Chen achen@ mailto:achen@thinkingphones.comfuze.com http://fuze.com
*Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
thanks Fred.
Second question. What happens if I have more than one trunk with same priority? Back to my example:
primary trunk - 1 sip trunk secondary trunk - 4 sip trunk
so secondary trunk have same priority across the 4 trunks
Thanks again.
On Thu, Jan 31, 2019 at 9:24 AM Fred Posner fred@palner.com wrote:
The algorithm uses priority based (high value to low value). First destination is that destination with the highest value priority.
You can also use groups for custom handling:
https://www.kamailio.org/docs/modules/stable/modules/dispatcher.html#dispatc...
Fred Posner https://qxork.com
On 1/31/19 8:27 AM, Andrew Chen wrote:
Hey all,
I need some more clarification on dispatcher alg 8:
“8” - use first destination (good for failover).
What is meant by "first destination"? How is that defined if I have more than one carrier.
More specifically in our case for some PSTN locations we have this setup:
primary carrier - 1 sip trunk backup carrier - 4 sip trunks
or
primary carrier - 4 sip trunks backup carrier - 1 sip trunk
the one that have 4 sip trunks is it going to round-robin through it?
this is setup on our old 4.1.5 release.
thanks
-- Andy Chen achen@ mailto:achen@thinkingphones.comfuze.com http://fuze.com
*Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient,
you
are hereby notified that any dissemination, distribution or copying of
this
e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail
or
any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-
Andrew Chen -
Fred Posner