13 Sep
2017
13 Sep
'17
5:33 p.m.
Hi Guys,
I have a SIP provider who only accept registrations from users, so I have registered my
kamailio Server with them using the uac module.
It is registered fine, and I can get inbound calls on the trunk.
My query is the best way to send outbound calls out via the registered sip gateway?
I would normally load balance using dispatcher if it was to IP authenticating providers,
but as they are using registration, what would be best practice to send outbound calls via
the registration which is establised with the uac module?
Is it just a question of doing it within the configuration file, as again they will look
to auth requests as well with a 401/407 so I assume I can use uac_auth() for that.
Just wondering what other people have done if anything, is my other option is to register
using a B2Bua on the same server, and leave kamailio just as a proxy.
Many thanks
Jon
13 Sep
13 Sep
5:44 p.m.
On Wed, Sep 13, 2017 at 03:33:19PM +0000, Jonathan Hunter wrote:
I have a SIP provider who only accept registrations
from users, so I
have registered my kamailio Server with them using the uac module.
It is registered fine, and I can get inbound calls on the trunk.
My query is the best way to send outbound calls out via the registered
sip gateway?
Normally there is no correlation between REGISTERs (to tell an other
server where to send incoming INVITEs) and outgoing INVITEs. So just do
whatever you normally do and be prepared to respond to a challend (with
auc_auth).
6:22 p.m.
Hi Daniel,
Thanks for the response.
My problem appears to be kamailio proxying the 407 response to the originating SIP trunk,
which I appreciate it will do as its a proxy.
I presume if I want to absorb the 407 and handle only on the kamailio proxy which is the
last point to the SIP carrier, this is more B2BUA, as I would normally have
FreeSWITCH/ASterisk registering with the outbound sip provider and proxy the request via
kamailio, where as in this case I am registering direct from kamailio so making it a
little more complex in terms of handling the 407.
Jon
________________________________
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Daniel Tryba
<d.tryba(a)pocos.nl>
Sent: 13 September 2017 15:44
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] kamailio 4.4 registering to a SIP trunk provider using UAC then
outbound routing to it.
On Wed, Sep 13, 2017 at 03:33:19PM +0000, Jonathan Hunter wrote:
I have a SIP provider who only accept registrations
from users, so I
have registered my kamailio Server with them using the uac module.
It is registered fine, and I can get inbound calls on the trunk.
My query is the best way to send outbound calls out via the registered
sip gateway?
Normally there is no correlation between REGISTERs (to tell an other
server where to send incoming INVITEs) and outgoing INVITEs. So just do
whatever you normally do and be prepared to respond to a challend (with
auc_auth).
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
sr-users -- Kamailio (SER) - Users Mailing
List<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
lists.kamailio.org
SIP Router Users Mailing list - online email forum for communities of SIP Express Router
(SER) and Kamailio (OpenSER) projects. Subscription is open to anyone that ...
2639
days inactive
2639
days old
2 comments
2 participants
participants (2)
-
Daniel Tryba -
Jonathan Hunter