Hi Samuel,

Thanks for your reply. I tried looking for the ser.init file, I only found debian, gentoo and rpm versions of the ser.init file. I am using Solaris 10, I don't know if that makes a difference...

bash# find / -name ser.init /tmp/install/ser-0.9.6/debian/ser.init /tmp/install/ser-0.9.6/gentoo/ser.init /tmp/install/ser-0.9.6/rpm/ser.init

Is the rpm one ok? Or is there another one I can use?

Thanks, Ben

-----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Thursday, April 12, 2007 4:13 AM To: POON Ben Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Auto start at boot up

serctl is a tool for controlling SER while it's running, not the script strating/stop/ SER. You should look for the script ser.init under pkg and move it to /etc/init.d After that you should create the links you made but pointing to ser.init instead of serctl.

samuel.

2007/4/11, POON Ben Ben.Poon@alcatel-lucent.com:

Hi all,

I was wondering if I can auto start SER at boot up? I am running Solaris 10 with SER 0.9.6.

I've done this:

ln /usr/local/sbin/serctl /etc/rc3.d/S99serln /usr/local/sbin/serctl /etc/rc0.d/K00ser ln /usr/local/sbin/serctl /etc/rc1.d/K00ser ln /usr/local/sbin/serctl /etc/rc2.d/K00ser ln /usr/local/sbin/serctl /etc/rc3.d/K00ser

But after reboot it still doesn't start... Did i make the links wrong? Or is there another setting somewhere?

Thanks Ben _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

What you need is a script that starts ser and one that stops it. You can create two small wrappers around serctl, ex. serstart and serstop, each just running /path/serctl start and /path/serctl stop respectively. Then you ln serstart to S99 and serstop to K99. g-)

samuel wrote:

uops...then it's missing or probably you can use another. I've never used solaris so I can not guide you further, sorry.

Anyone there using solaris can help?

samuel.

2007/4/12, POON Ben Ben.Poon@alcatel-lucent.com:

...

Hi Samuel,

Thanks for your reply. I tried looking for the ser.init file, I only found debian, gentoo and rpm versions of the ser.init file. I am using Solaris 10, I don't know if that makes a difference...

bash# find / -name ser.init /tmp/install/ser-0.9.6/debian/ser.init /tmp/install/ser-0.9.6/gentoo/ser.init /tmp/install/ser-0.9.6/rpm/ser.init

Is the rpm one ok? Or is there another one I can use?

Thanks, Ben

-----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Thursday, April 12, 2007 4:13 AM To: POON Ben Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Auto start at boot up

serctl is a tool for controlling SER while it's running, not the script strating/stop/ SER. You should look for the script ser.init under pkg and move it to /etc/init.d After that you should create the links you made but pointing to ser.init instead of serctl.

samuel.

2007/4/11, POON Ben Ben.Poon@alcatel-lucent.com:

...

Hi all,

I was wondering if I can auto start SER at boot up? I am running Solaris 10 with SER 0.9.6.

I've done this:

ln /usr/local/sbin/serctl /etc/rc3.d/S99serln /usr/local/sbin/serctl /etc/rc0.d/K00ser ln /usr/local/sbin/serctl /etc/rc1.d/K00ser ln /usr/local/sbin/serctl /etc/rc2.d/K00ser ln /usr/local/sbin/serctl /etc/rc3.d/K00ser

But after reboot it still doesn't start... Did i make the links wrong? Or is there another setting somewhere?

Thanks Ben _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers