[Serusers] SER with Radius Accounting -- no radius accounting - sr-users

16 Sep 2004


      Hi All,
I could now configure SER 0.8.14 with FreeRadius and
authentication process goes smoothly for REGISTRATION.
But when i call from one sip UA to other, I don't see
any radius accounting generated.
My Configuration file is as follows:
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei
Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
#debug=9         # debug level (cmd line: -dddddddddd)
#fork=no
#log_stderror=yes	# (cmd line: -E)
/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/
check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
loadmodule
"/usr/local/lib/ser/modules/group_radius.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
modparam("usrloc", "db_mode",   0)
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- RADIS AUTHENTICTON
ACCOUNTING RELATED --------------------
modparam("auth_radius", "radius_config",
"/etc/radiusclient/radiusclient.conf")
modparam("acc", "radius_config",
"/etc/radiusclient/radiusclient.conf")
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 2)
modparam("uri_radius", "radius_config",
"/etc/radiusclient/radiusclient.conf")
modparam("uri_radius", "service_type", 11)
modparam("group_radius", "radius_config",
"/etc/radiusclient/radiusclient.conf")
# -------------------------  request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
    	sl_send_reply("483","Too Many Hops");
    	break;
    };
    if ( msg:len > max_len ) {
    	sl_send_reply("513", "Message too big");
    	break;
    };
# we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy;
that's
    # particularly good if upstream and downstream
entities
    # use different transport protocol
    record_route();	
    # loose-route processing
    if (loose_route()) {
    	t_relay();
    	break;
    };
# if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following
command
    # with proper names and addresses in it)
    if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
    		if (!radius_www_authorize("test1")) {
    			www_challenge("test1", "0");
    			break;
    		};
save("location");
    		break;
    	};
# native SIP destinations are handled using our
USRLOC DB
    	if (!lookup("location")) {
    		sl_send_reply("404", "Not Found");
    		break;
    	};
    };
    # forward to current uri now; use stateful
forwarding; that
    # works reliably even if we forward from TCP to UDP
    if (!t_relay()) {
    	sl_reply_error();
    };
}
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com