Hi all,
What I want to do ~~~~~~~~~~~~~~ If a call to a SIP AoR fails then try the PSTN number associated with the AoR by routing the request to a PSTN gateway. Calls to a PSTN gateway need to be charged so need to call the Ro_CCR function in ims_charging module.
How I tried to do it ~~~~~~~~~~~~~~ In the failure_route[MANAGE_FAILURE] block I call the Ro_CCR()
Result was ~~~~~~~~ Kamailio fails to parse config file. yyparse(): misused command Ro_CCR yyerror_at(): parse error in config file //etc/kamailio/kamailio.cfg, line 1162, column 91: Command cannot be used in the block
So two questions: 1) What constraints are there for calling functions in the failure_route blocks i.e. how does parser decide what can be called and what can't 2) Any thoughts of how I can do effectively a late charging decision
Cheers and thanks in advance Shane
Shane Harrison Senior Software Engineer
Imagination Technologies NZ Limited Level 2 1 Market Grove Lower Hutt, 5010 New Zealand
PO Box 30-449 Lower Hutt, 5040 New Zealand
Phone: +64 4 890-3681 ext 3361
Hi all,
Using a technique Daniel mentioned in a previous post, I have removed the parser issue. I called a separate route block from the failure_route block and call the Ro_CCR from there.
However my questions still remain as I don't really know how to determine if that Ro_CCR() is safe to call from there. Documentation has some stern warnings :-)
Cheers Shane
-----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Shane Harrison Sent: Wednesday, 11 March 2015 4:06 p.m. To: Kamailio (SER) - Users Mailing List Subject: [SR-Users] Calling ims charging function in route_failure
Hi all,
What I want to do
If a call to a SIP AoR fails then try the PSTN number associated with the AoR by routing the request to a PSTN gateway. Calls to a PSTN gateway need to be charged so need to call the Ro_CCR function in ims_charging module. How I tried to do itIn the failure_route[MANAGE_FAILURE] block I call the Ro_CCR()
Result was
Kamailio fails to parse config file. yyparse(): misused command Ro_CCR yyerror_at(): parse error in config file //etc/kamailio/kamailio.cfg, line 1162, column 91: Command cannot be used in the block So two questions: 1) What constraints are there for calling functions in the failure_route blocks i.e. how does parser decide what can be called and what can't 2) Any thoughts of how I can do effectively a late charging decision Cheers and thanks in advance Shane Shane Harrison Senior Software Engineer Imagination Technologies NZ Limited Level 2 1 Market Grove Lower Hutt, 5010 New Zealand PO Box 30-449 Lower Hutt, 5040 New Zealand Phone: +64 4 890-3681 ext 3361 _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr- users@lists.sip-router.org http://lists.sip-router.org/cgi- bin/mailman/listinfo/sr-users
-
Shane Harrison