Yin,

here you have a proper configuration:

http://openser.svn.sourceforge.net/viewvc/openser/branches/1.2/examples/nath...

Just make sure you install rtpproxy and start it on the same host with your openser. If properly installed, openser should recognize it in the logs (found RTP proxy, support for it activated)

Cheers, DanB

On 8/28/07, zze-WU Yin RD-MAPS-LAN yin.wu@orange-ftgroup.com wrote:

Hi Dan,

In fact, I have two telephones VOIP and Openser as a SIP Proxy (in the same local network,there's no NAT.), they can register and call each other with no probleme. Now I just need the stream RTP pass by Openser, but no directely between two telephone. I have installed the rtpproxy, but I don't understand how it works exactely. And I don't know if it is nessary to install mediaproxy? This is my openser.cfg, can you give me some advice? Thank you very much!

Yin

-----Message d'origine----- De : Dan-Cristian Bogos [mailto:dan.bogos@gmail.com] Envoyé : mardi 28 août 2007 10:29 À : zze-WU Yin RD-MAPS-LAN Cc : users openser.org Objet : Re: [OpenSER-Users] About RTP stream

Yin,

It all depends on what do u want to use it for. Can u explain a bit your scenario?

DanB

On 8/28/07, zze-WU Yin RD-MAPS-LAN yin.wu@orange-ftgroup.com wrote:

...

Thank you for your help. I don't need NAT, it's just a local network. What I have to use? The Rtpproxy or Mediaproxy? And what diffrence between them?

Yin

-----Message d'origine----- De : Dan-Cristian Bogos [mailto:dan.bogos@gmail.com] Envoyé : lundi 27 août 2007 18:01 À : zze-WU Yin RD-MAPS-LAN Cc : users@openser.org Objet : Re: [OpenSER-Users] About RTP stream

Hello Yin,

openser by itself has no RTP capability. If you want NAT bypass solutions, check out the following softwares:

1. RTPProxy - http://ftp.iptel.org/pub/rtpproxy/
2. Mediaproxy: - http://ag-projects.com/MediaProxy.html

If you are looking for some RTP related applications, you can check SEMS: http://www.iptel.org/sems

Hope this helps.

DanB

On 8/27/07, zze-WU Yin RD-MAPS-LAN yin.wu@orange-ftgroup.com wrote:

...

Hello everyone,

    Now my openser is just a Sip proxy which manage the sip

requests and I want to manage RTP streams by the openser, that means openser recieve RTP streams and retransmit them. How can I do?

    Thank you very much!

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users