I am trying to get SER and rtpproxy to run together on my OpenBSD 3.5 firewall. My intention is to have SER act as a SIP proxy for incoming SIP calls that reach me by IP address or domain name. I also have an Asterisk PBX behind my firewall. My problem is that SER can't find a running RTP proxy and I am not sure why. I run rtpproxy without any switches. SER is run as a non-root user and in an chroot directory. My ser.cfg is below: # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=2 fifo="/tmp/ser_fifo" alias="my.domainname.com" listen=204.118.177.213 #listen=192.168.3.1 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth", "password_column", "password") #modparam("rr", "enable_full_lr", 1) modparam("registrar", "nat_flag", 6) #nathelper modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT # ------------------------- request routing logic ------------------- # main routing logic route{ # compulsory processing of Route header fields and adding RR loose_route(); # ATA's are symmetric but don't advertise it -- force use of rport if (search("User-Agent: Cisco ATA.*")) { setflag(1); # remember this is ATA force_rport(); fix_nated_contact(); }; /* registration (uses rewritten contacts) */ if (method=="REGISTER") { save("my.domainname.com"); break; }; if (method=="INVITE") { record_route(); if (isflagset(1)) { # ATA ? force_rtp_proxy(); }; /* set up reply processing */ t_on_reply("1"); }; if (method == "INVITE" || method == "CANCEL") { if (!lookup("my.domainname.com")) { sl_send_reply("404", "Not Found"); break; }; }; /* set up reply processing and forward statefuly */ t_relay(); } # all incoming replies for t_onrepli-ed transactions enter here onreply_route[1] { if (status=~"2[0-9][0-9]" && search("Server: Cisco ATA.*")) fix_nated_contact(); force_rtp_proxy(); }